Micro Networks
An Integrated Circuit Systems Company
M200/210 Series
Performance Specifications
M200/210 Series
Frequency Multipliers
DESCRIPTION
The M200/210 Series is a family of Phase-Locked
Frequency Multipliers that range in output
frequencies from 200MHz to 650MHz. These low-
skew, low-noise devices accept either single-ended
or differential inputs and are ideally suited to
applications where an environmentally remote or
stabilized reference is available as a low frequency
source for multiplication.
FEATURES
200MHz to 650MHz Output Frequency
Low 3ps (rms) Typical Phase Jitter
Low 1.5nsec Skew (Fout to Fref)
Maximum
10% Frequency Lock Range
Multiplication Factors from 2 to 255
Single Ended and Differential Input
Models
ECL/PECL Differential Outputs
Single Supply Operation
Extended Temperature Range Models
Available
The M200/210 Frequency Multiplier Series was
developed specifically to meet tough performance
requirements found in today’s high-end RISC-
based Computers, Telecom Transmission, Base
Station, ATE, and Datacom applications.
Packaged in small, 24-pin double-wide metal DIP
packages, the M200/210 Series devices are
available with either ECL or PECL differential
outputs and operate from a single supply (+5V for
PECL and -5V for ECL).
Standard models are specified for 0°C to +70°C
operation. Extended temperature range models are
available for -25°C to +85°C operation (L models)
and for -55°C to +125°C operation (M models).
APPLICATIONS
High-end RISC-based Computers
Telecom Transmission
Base Station
ATE
Datacom
ISO 9001
Registered
Micro Networks
324 Clark Street
Worcester, MA 01606
tel: 508-852-5400
fax: 508-852-8456
www.micronetworks.com
Micro Networks
An Integrated Circuit Systems Company
SPECIFICATIONS
M200/210 Series
Performance Specifications
Specifications @ T
A
= +25°C, -V
EE
= -5V for “E”, +V
CC
= +5V for “P”, unless otherwise indicated.
PARAMETER
Output Frequency Range
Input Frequency Range
Min
Typ
Max
Units
Multiplication Factor
Frequency Lock Range
Input Impedence (Note 4)
Input Voltage Levels: M200E
M200P
M210E
M210P
Output Configuration (Note 1):
M200/210E
M200/210P
Skew (Fout to Fref)
Rise/Fall Time (20% to 80%)
Output Voltage Levels:
M200/210E
M200/210P
Output Drive (Note 1)
Output Symmetry (Note 3)
Output Phase Jitter (Note 2)
Start Up Time
Power Supply Requirements:
M200/210E (-Vee )
M200/210P (+Vcc )
Power Supply Current:
M200/210E (-Vee )
M200/210P (+Vcc )
200
1
2
1
450
650
80
255
10
500
ECL, Single Ended
PECL, Single Ended
ECL, Differntial
PECL, Differential
Differential ECL
Differential PECL
1.5
575
ECL compatible
PECL compatible
550
MHz
MHz
%
Ω
nsec
psec
45/55
50/55
3
40
-5.00
+5.00
-350
+350
50
55/45
5
mA
%
psec (rms)
msec
Volts
Volts
mA
mA
-4.35
+4.35
-5.25
+5.25
Notes: 1. The output is measured with 250Ω termination resistor connected to V
EE
.
2. The output jitter is measured with a maximum input jitter of 20psec p-p.
3. Symmetry is measured at V
BB
= -1.35V for M200/210E models and V
BB
= +V
CC
-1.35V for M200/210P models.
4. The M210 model’s input does not contain pulldown resistors thereby providing a high impedance to the differential input source.
The termination resistors should be located as close to the input pins as possible. The differential input voltage should not exceed 1.0V.
ORDERING INFORMATION
Part Number
M200P622.080-032K
ABSOLUTE MAX RATINGS
Operating Temp. Range (Case) ....................... -55°C to +125°C
Specified Temp. Range
M2X0X-XXX.XX-XXXK ............................ 0°C to +70°C
M2X0X-XXX.XX-XXXL ........................ -25°C to +85°C
M2X0X-XXX.XX-XXXM ..................... -55°C to +125°C
Storage Temp. Range (Ambient) ..................... -55°C to +125°C
Supply M102/210E ............................................... -7.0 to 0Volts
Supply M102/210P .............................................. 0 to +7.0Volts
Output Current .......................................................... 50mA Max
tel: 508-852-5400
fax: 508-852-8456
www.micronetworks.com
Select M200 for single-ended input or
M210 for differential input configuration:
Select device output format:
Specify “E” for ECL or “P” for PECL
Specify frequency in MHz xxx.xxxx:
Specify multiplication factor:
002 through 255
Add suffix:
“K” for 0°C to +70°C operation
“L” for -25°C to +85°C operation
“M” for -55°C to +125°C operation
Micro Networks
324 Clark Street
Worcester, MA 01606
Micro Networks
An Integrated Circuit Systems Company
PIN CONFIGURATIONS
M200/210 Series
Performance Specifications
M200E Model
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Ground
Fin
Ground
-5 Volts
Ground
-5 Volts
Ground
-5 Volts
Ground
Osc. Out Q
Osc. Out Q
Ground
24.
23.
22.
21.
20.
19.
18.
17.
16.
15.
14.
13.
Ground
Ground
Ground
Ground
-5 Volts
NC
-5 Volts
Ground
-5 Volts
Test Point
-5 Volts
Ground
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
M200P Model
Ground
Fin
Ground
Ground
+5 Volts
Ground
+5 Volts
Ground
+5 Volts
Osc. Out Q
Osc. Out Q
+5 Volts
24.
23.
22.
21.
20.
19.
18.
17.
16.
15.
14.
13.
Ground
Ground
Ground
Ground
Ground
NC
Ground
+5 Volts
Ground
Test Point
Ground
+5 Volts
1
24
TOP
VIEW
M210E Model
12
13
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Ground
Fin
Fin
-5 Volts
Ground
-5 Volts
Ground
-5 Volts
Ground
Osc. Out Q
Osc. Out Q
Ground
24.
23.
22.
21.
20.
19.
18.
17.
16.
15.
14.
13.
-5 Volts
Ground
Ground
Ground
-5 Volts
NC
-5 Volts
Ground
-5 Volts
Test Point
-5 Volts
Ground
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
M210P Model
+5 Volts
Fin
Fin
Ground
+5 Volts
Ground
+5 Volts
Ground
+5 Volts
Osc. Out Q
Osc. Out Q
+5 Volts
24.
23.
22.
21.
20.
19.
18.
17.
16.
15.
14.
13.
Ground
Ground
Ground
Ground
Ground
NC
Ground
+5 Volts
Ground
Test Point
Ground
+5 Volts
PACKAGE OUTLINES
Micro Networks
324 Clark Street
Worcester, MA 01606
tel: 508-852-5400
fax: 508-852-8456
www.micronetworks.com
Micro Networks
An Integrated Circuit Systems Company
APPLICATION CIRCUITS
M200/210 Series
Performance Specifications
Micro Networks makes no assertion or warranty that the circuitry and the uses thereof disclosed herein are
non-infringing on any valid US or foreign patents. Micro Networks assumes no liability as a result of the use
of said specifications and reserves the right to make changes to specifications without notice. Contact
your nearest Micro Networks sales representative office for the latest specifications.
Micro Networks
An Integrated Circuit Systems Company
324 Clark Street Worcester, MA 01606 tel: 508-852-5400 fax: 508-852-8456
European Sales Headquarters Hertogsingel 20 6214 AD Maastricht The Netherlands tel: +31-43-32-70912 fax: +31-43-32-70715
Micro Networks
324 Clark Street
Worcester, MA
www.micronetworks.com
01606 tel: 508-852-5400
fax: 508-852-8456
www.micronetworks.com
Rev. 4.0
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
