MIC5512/14
Single 300mA LDO
in 1.6mm × 1.6mm Thin DFN Package
General Description
Features
The MIC5512/14 is an advanced general-purpose LDO
•
Input voltage range: 2.5V to 5.5V
ideal for powering general-purpose portable devices. The
•
Fixed output voltage range: 1.0V to 3.3V
MIC5512/14 family of products provides a high-
•
300mA guaranteed output current
performance 300mA LDO in an ultra-small 1.6mm x
•
±1% initial output accuracy
1.6mm Thin DFN package. The MIC5512 and MIC5514
•
Stable with 1µF ceramic output capacitors
LDOs include an auto-discharge feature on the output that
is activated when the enable pin is low. The MIC5514 have
•
Low dropout voltage: 160mV @ 300mA
an internal pull down resistor on the enable pin that will
•
Output discharge circuit
disable the output when the enable pin is left floating, this
•
Internal enable pull down resistor (MIC5514)
is ideal for applications where the control signal is floating
•
Available in ultra-small 6-pin 1.6mm × 1.6mm Thin DFN
during processor boot up.
package
Ideal for battery-powered applications, the MIC5512/14
offers a typical 1% initial accuracy, low dropout voltage
Applications
(160mV at 300mA), and low ground current (typically
•
Smart phones
38µA). The MIC5512/14 can also be put into a zero-off-
•
DSCs, GPS, PMPs, and PDAs
mode current state, drawing virtually no current when
disabled.
•
Medical devices
The MIC5512/14 has an operating junction temperature
•
Portable electronics
range of –40°C to 125°C.
•
5V systems
Data sheets and support documentation can be found on
Micrel’s web site at:
www.micrel.com.
___________________________________________________________________________________________________________
Typical Application
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (
408
) 944-0800 • fax + 1 (408) 474-1000 •
http://www.micrel.com
April 8, 2013
Revision 1.1
Micrel, Inc.
MIC5512/14
Absolute Maximum Ratings
(1)
Supply Voltage (V
IN
) .......................................... –0.3V to 6V
Enable Voltage (V
EN
). ........................................ –0.3V to V
IN
(3)
Power Dissipation (P
D
) ........................... Internally Limited
Lead Temperature (soldering, 10s) ............................ 260°C
Junction Temperature (T
J
) ........................ –40°C to +150°C
Storage Temperature (T
s
) ......................... –65°C to +150°C
(4)
ESD Rating .................................................................. 3kV
Operating Ratings
(2)
Supply Voltage (V
IN
) ......................................... 2.5V to 5.5V
Enable Voltage (V
EN
) .............................................. 0V to V
IN
Junction Temperature (T
J
) ........................ –40°C to +125°C
Junction Thermal Resistance
1.6mm × 1.6mm Thin DFN-6 (θ
JA
) .................. 92.4°C/W
Ordering Information
Part Number
MIC5512-1.2YMT
MIC5512-1.8YMT
MIC5512-2.8YMT
MIC5512-3.3YMT
MIC5514-1.2YMT
MIC5514-1.8YMT
MIC5514-2.8YMT
MIC5514-3.0YMT
MIC5514-3.3YMT
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. The maximum allowable power dissipation of any T
A
(ambient temperature) is P
D(max)
= (T
J(max)
– T
A
) /
θ
JA
. Exceeding the maximum allowable power
dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.
4. Devices are ESD sensitive. Handling precautions are recommended. Human body model, 1.5kΩ in series with 100pF.
5. Other voltages are available. Contact Micrel for details.
Marking
Code
7E
7D
7C
7A
B8
B7
A9
A8
A7
Output
(5)
Voltage
1.2V
1.8V
2.8V
3.3V
1.2V
1.8V
2.8V
3.0V
3.3V
Auto-
Discharge
YES
YES
YES
YES
YES
YES
YES
YES
YES
EN
Pull-down
NO
NO
NO
NO
YES
YES
YES
YES
YES
Temperature
Range
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB
http://www.micrel.com
Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This
information is not intended as a warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry,
specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Micrel’s terms and conditions of sale for such products, Micrel assumes no liability
whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel products including liability or warranties
relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.
© 2013 Micrel, Incorporated.
April, 8 2013
2
Revision 1.1
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
