PoE-Powered, Network-Extending 10/100Base-T Multi-Port Switch
PD-Switch
M
edia
C
onversion
PD-Switch combines flexible copper and fiber interface options with
port and packet-based traffic prioritization while extending network
range by utilizing Power over Ethernet (PoE) technology
Features and Benefits
10/100Base-T multi-port switch
powered by IEEE 802.3af Power Over
Ethernet
• PD accepts power from any network
device providing PoE
• Multiple ports increase network port
density
Meets a multitude of installation
requirements
• SFP and fiber port configurations
(optional) for different network
environments
• 1X9 fiber port is fixed at 100 Mbps
• SFP port speed is SFP dependent
• All RJ-45 ports feature Auto-Cross and
Auto Negotiation
• Port for High Priority traffic
• Available with ST or SC fiber
connectors
• Optional single-strand fiber model
• Broadcast Storm Protection helps
control excessive broadcast traffic
• DiffServ on all ports provides quality of
service prioritization
• Far End Fault provides notification of
Link Loss on all fiber ports
• One High-Priority Port
• Supports 1,916 byte Packet Size
The (PoE) PD-Switch is a full-featured, 5-port 10/100Base-T MAC
layer switch that extends the range of Ethernet networks, and increases
port density, while being powered via IEEE 802.3af-compliant PoE
through its "PD-port" (eliminating the need to run a separate power
line for the device). Ethernet cabling usually runs only 100 meters;
through the use of the PD-Switch, the outer range of an Ethernet
network can be extended by an additional 100 meters.
With multiple port configurations, the PD-Switch provides a variety
of port options while increasing port density. PD-Switches come
equipped with one "PD" RJ-45 port and either:
• Four 10/100Base-T RJ-45 data ports
• Three 10/100Base-T RJ-45 data ports and one SFP data port
• Two 10/100Base-T RJ-45 data ports and one 100Base-FX fiber
data port
Full-Featured Switch
Application Example
The PD-Switch has been connected to a central (PoE) PSE-Switch, extending the range of the network and increasing
port density by using a combination of RJ-45 ports and fiber ports.
www.imcnetworks.com
800-624-1070
RoHS Compliant
Technical Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RoHS-Compliant
Acts as a PD – Powered Device
IEEE 802.3x 10/100Base-T
IEEE 802.3u Auto-Negotiation
IEEE 802.3af Power Over Ethernet, Powered (PD)
RFC-2474 and RFC-2475 DiffServ/ToS
High Priority port
AutoCross and Auto-Negotiation on all ports
Includes diagnostic LEDs
Maximum 1,916 byte Packet Size
Broadcast Storm Protection
50/125µm or 62.5/125µm multi-mode
9/125µm single-mode
Available for single-strand fiber
Small, rugged design
Supports Half and Full-Duplex operation
Connectors:
• RJ-45 and optional ST, SC or SFP
Operating Temp:
+32° F to +122° F (0° C to +50°C)
Regulatory Approvals:
• FCC Class A
• CE
Storage Temp:
-13° C to +158° F (-25° C to +70° C)
Dimensions:
1.55”H x 4.75”L x 7.31”D
(3.94cm H x 12.07cm L x 18.57cm D)
Humidity:
5% to 95%, non condensing,
0 to 10,000 ft. altitude
Shipping Weight:
1.8 lbs (.82 kg)
Power Rating:
36 to 50 VDC, 56 to 40mA
Fiber Optics Specifications
For each product listed below in the Ordering Information section, the DISTANCE represents an approximate fiber distance based on industry-standard
fiber attenuation specifications. Actual distances will vary for each installation. For complete power budgets and information on calculating specific
distances, visit www.imcnetworks.com/go/fcs or contact IMC Networks Fiber Consulting Services at 949-465-3000 for a free consultation.
Ordering Information
PART NUMBER
PD-Switch
852-16440
852-16441
852-16442
852-16443
852-16444
852-16445
852-16446
852-16447
852-16448
852-16449
852-16450
852-16470
852-16471
852-16472
852-16473
852-16474
852-16475
DESCRIPTION
PD-Switch, TX/5
PD-Switch, TX/4 + SFP
§
PD-Switch, TX/3 + TX/SX-MM850-ST
PD-Switch, TX/3 + TX/SX-MM850-SC
PD-Switch, TX/3 + TX/FX-MM1300-ST
PD-Switch, TX/3 + TX/FX-MM1300-SC
PD-Switch, TX/3 + TX/FX-SM1310/PLUS-ST
PD-Switch, TX/3 + TX/FX-SM1310/PLUS-SC
PD-Switch, TX/3 + TX/FX-SM1310/LONG-ST
PD-Switch, TX/3 + TX/FX-SM1310/LONG-SC
PD-Switch, TX/3 + TX/FX-SM1550/LONG-SC
PD-Switch, TX/3 + TX/SSFX-SM1310-SC (1550 rcv)
PD-Switch, TX/3 + TX/SSFX-SM1550-SC (1310 rcv)
PD-Switch, TX/3 + TX/SSFX-SM1310/PLUS-SC (1550 rcv)
PD-Switch, TX/3 + TX/SSFX-SM1550/PLUS-SC (1310 rcv)
PD-Switch, TX/3 + TX/SSFX-SM1310/LONG-SC (1550 rcv)
PD-Switch, TX/3 + TX/SSFX-SM1550/LONG-SC (1310 rcv)
DISTANCE
100 m
Various
2 km
2 km
2 km
2 km
40 km
40 km
80 km
80 km
80 km
20 km
20 km
40 km
40 km
60 km
60 km
PD-Switch Single-Strand Fiber
*
*
These products have single-strand fiber technology. Deploy in pairs, or connect to another compatible IMC Networks single-strand fiber product.
For more information go to: www.imcnetworks.com/products/SSFX.cfm
§
SFP modules are sold separately. For more information on IMC Networks’ SFPs, go to: www.imcnetworks.com/Products/product.cfm?family=32
IMC Networks
IMC Networks
Headquarters
19772 Pauling
Foothill Ranch, CA 92610
TEL: 949-465-3000
FAX: 949-465-3020
sales@imcnetworks.com
www.imcnetworks.com
Europe
Herseltsesteenweg 268
B-3200 Aarschot | Belgium
TEL: +32-16-550880
FAX: +32-16-550888
eurosales@imcnetworks.com
IMC Networks
Eastern US/Latin America
28050 U.S. Hwy. 19 North, Suite 306
Clearwater, FL 33761
TEL: 727-797-0300
FAX: 727-797-0331
latinsales@imcnetworks.com
IMC Networks
Fiber Consulting Services
For information call:
TEL: 949-465-3000
1-800-624-1070
(US/CAN)
+32-16-550880
(Europe)
fcs@imcnetworks.com
Copyright © 2012 IMC Networks. All rights
reserved. The information in this document is
subject to change without notice. IMC Networks
assumes no responsibility for any errors that may
appear in this document. Specific product names
may be trademarks or registered trademarks and
are the property of their respective companies.
DS-PD-Switch-1204