METALLIZED POLYPROPYLENE/FOIL HYBRID
TAPE WRAP AND EPOXY FILL CASE
329
PAGE 5 OF 5
GENERAL SPECIFICATIONS
PHYSICAL CHARACTERISTICS
CONSTRUCTION:
NON-INDUCTIVE WOUND METALLIZED POLYPROPYLENE FILM AND FOIL HYBRID.
CASE:
FLAME RETARDANT TAPE WRAP CASE AND EPOXY FILL.
LEAD MATERIAL:
0.025" (0.6mm) THICK SOLDER COATED OR TINNED BRASS IGBT MOUNT STYLE LUGS
AVAILABLE IN EITHER "STEP" (S) OR "FLAT" (F) CONFIGURATIONS.
DIMENSIONS:
AS SPECIFIED IN TABLES.
ELECTRICAL CHARACTERISTICS
CAPACITANCE:
AS SPECIFIED IN TABLES ± REQUESTED TOLERANCE WHEN MEASURED AT OR REFERRED
TO 1000 ± 20 Hz AND 25 ± 5 °C.
TOLERANCE:
±1%, ±2%, ±5%, ±10%, AND ±20% AVAILABLE. OTHER TOLERANCES AVAILABLE UPON
REQUEST.
DISSIPATION FACTOR:
SHALL NOT BE GREATER THAN 0.1% WHEN MEASURED AT OR REFERRED TO
1000 ± 20 Hz AND 25 ± 5 °C.
INSULATION RESISTANCE:
SHALL BE GREATER THAN 100,000 MΩ x µF WHEN MEASURED AFTER 2 MINUTES
ELECTRIFICATION AT 100VDC AND 25 ± 5 °C.
DIELECTRIC STRENGTH:
150% RATED VOLTAGE FOR 1 MINUTE THROUGH A LIMITING RESISTANCE OF
100 OHMS/VOLT AT 25 ± 5 °C.
RATED VOLTAGE:
600VDC/250VAC/800V
PEAK
, 1200VDC/500VAC/1600V
PEAK
, AND 2000VDC/500VAC/2600V
PEAK
AVAILABLE. AC VOLTAGE RATINGS ARE FOR 60 Hz OPERATION - VOLTAGE MUST BE DERATED FOR HIGHER
FREQUENCIES BASED ON A CONSTANT VOLT-AMPERE. PEAK VOLTAGE RATINGS ARE VALID FOR NON-
RECURRING SURGE VOLTAGES - RECURRING SURGE VOLTAGE RATING IS SAME AS DC RATED VOLTAGE.
TEMPERATURE:
-55 °C TO +105 °C AT FULL RATED CURRENT AND VOLTAGE.
RATED CURRENT:
PEAK CURRENT RATINGS AS SPECIFIED IN TABLES. RMS CURRENT RATINGS AS
SPECIFIED IN CHART.
ESR (EQUIVALENT SERIES RESISTANCE):
TYPICAL ESR AS SPECIFIED IN TABLES. MAXIMUM ESR LIMIT IS 2
X TYPICAL ESR VALUE.
ESL (EQUIVALENT SERIES INDUCTANCE):
TYPICAL ESL MEASURES FROM 18nH TO 22 nH.
ADDITIONAL INFORMATION
ORDERING INFORMATION:
ALL ASC CAPACITORS ARE ORDERED BY "FAMILY CAP-TOL-VOLT"
DESIGNATION. ADD "S" OR "F" SUFFIX TO FAMILY TO INDICATE "STEP" OR "FLAT" TERMINALS
RESPECTIVELY. (I.E. TO ORDER A 329, STEP TERMINAL, 1.0µF, ±10%, 600VDC CAPACITOR, REQUEST PART
NUMBER "329S 1-10-600")
SEE ALSO:
"GENERAL INFORMATION - POLYPROPYLENE CAPACITORS" DOCUMENT FOR ADDITIONAL
PHYSICAL, ELECTRICAL, AND PERFORMANCE CHARACTERISTICS NOT MENTIONED IN THIS FILE.
WARNING:
INFORMATION ON THIS FILE IS SUBJECT TO CHANGE WITHOUT NOTICE AT ASC'S DISCRETION.
LAST MODIFIED: 08/26/01
Phone: (308) 284-3611
Fax: (308) 284-8324
301 WEST O STREET
•
OGALLALA, NE 69153
e-mail: sales@ascapacitor.com
web: www.ascapacitor.com
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
