MF2000 Series
Powertron
•
•
•
•
•
•
•
Resistances from 1 to 10MOhms
Power Rating 0.4 to 0.65Watts
Resistance Tolerances to ±0.05%
TCR’s to ±3ppm/K
Very Low Inductance
Matched Sets Available
E192 Values in Stock
SPECIFICATIONS
Type
Watts @
70°C
Power
Rating
Resis-
tance
Range
(
W
)
1 to 5M
1 to 10M
3 to 10M
Maximum
Voltage
300
300
500
H
(MAX)
D
(MAX)
±0.002”
[±0.05mm]
d
L
(MIN)
W
(MIN)
RN
Size
-
MFM2207
MF2207
MF2617
0.40
0.40
0.65
( See MFM2207 Drawing )
0.260
[6.5]
0.600
[15.2]
0.100
[2.5]
0.230
[5.8]
0.028
[0.7]
0.032
[0.8]
1.20
[30]
1.20
[30]
0.300
[7.5]
0.690
[17.5]
RN55
RN65
MFM2207
Specification
Resistance Range
Tolerances
Temperature Coefficient
Temperature Range
Insulation Resistance
Climatic Category
Max Soldering Temperature
Voltage Coefficient
Value
1 Ohms to 10MOhms
±0.05% to ±1%
( See Charts )
-25°C to +125°C ( TC >= 25ppm/K )
-10°C to +85°C ( TC < 25ppm/K )
>10000 MOhms
55/125/56
+260°C / 10s
< 5ppm/V
Document Number: 64313
Revision: 20-09-10
For technical questions, contact:
powertron@vishaypg.com
www.powertron.de
1
MF2000 Series
Powertron
SPECIFICATIONS
(continued)
MFM2207
TCR / Tolerance / Resistance Chart
TCR
( ± ppm/K )
5
10
15
25
50
Resistances Available at These Tolerances
±0.05%
50 - 250K
50 - 510K
50 - 510K
50 - 510K
50 - 510K
±0.1%
10 - 500K
5 - 1M
5 - 1.5M
5 - 1.5M
5 - 2M
±0.25%
10 - 500K
5 - 1M
5 - 1.5M
5 - 3M
3 - 3M
±0.5%
10 - 500K
5 - 1M
5 - 2M
2 - 5M
2 - 5M
±1%
-
-
1 - 2M
1 - 5M
1 - 5M
MF2207
TCR / Tolerance / Resistance Chart
TCR
( ± ppm/K )
3
5
10
15
25
50
Resistances Available at These Tolerances
±0.05%
50 - 120K
50 - 250K
50 - 510K
50 - 510K
50 - 510K
50 - 510K
±0.1%
30 - 200K
10 - 500K
5 - 1M
5 - 1.5M
5 - 3M
5 - 3M
±0.25%
30 - 200K
10 - 500K
50 - 1M
5 - 2M
2 - 3M
2 - 3M
±0.5%
30 - 200K
10 - 500K
50 - 1M
5 - 2M
2 - 5M
2 - 10M
±1%
-
-
-
1 - 2M
1 - 5M
1 - 10M
MF2617
TCR / Tolerance / Resistance Chart
TCR
( ± ppm/K )
10
15
25
50
Resistances Available at These Tolerances
±0.05%
240 - 250K
240 - 250K
240 - 510K
100 - 510K
±0.1%
100 - 250K
100 - 250K
100 - 1M
50 - 10M
±0.25%
50 - 250K
50 - 250K
50 - 2M
10 - 10M
120
100
±0.5%
20 - 510K
20 - 510K
20 - 5M
5 - 10M
±1%
20 - 510K
20 - 510K
10 - 5M
3 - 10M
Power Derating Curve
Power ( % )
80
60
40
20
0
Ordering Information
Part Number - Resistance - Tolerance - TCR
Example: MF2207 1.1 kOhm 0.05% 5ppm
( Note: If no TCR is specified / the highest value will be supplied )
www.powertron.de
2
0
25
50
75
100
125
150
175
200
Ambient Temperature (°C)
Document Number: 64313
Revision: 20-09-10
For technical questions, contact:
powertron@vishaypg.com
Legal Disclaimer Notice
Vishay Precision Group
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase.
To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
综合技术交流
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
