HARTING
har-speed
M12
har-speed
M12: The innovative solution
With
har-speed
M12
HARTING
bases the Ethernet
network on a sustainable M12 foundation. The
har-speed
M12 differs significantly from today’s
M12 connectors for Ethernet because it is based
on a 4-pair connector face with paired shielding.
This allows
har-speed
M12 to be used for Ethernet
transfer rates up to 10 Gigabit. The new
HARTING
har-speed
M12 connector is, therefore, capable
of complying with the high requirements of the
transfer class E
A
, respectively the Cat. 6
A
. For the
first time an M12 cabling system can be used for
relevantly high data performance and permanent
sustainability.
The
har-speed
M12 connectors can be optimally
used for applications with bandwidths in
machine and facility engineering, but also for
the IP 67 infrastructure. The basis for the new
development is the new PAS 61076-2-10x that
defines a uniform connector face for 8-pole M12
connectors.
The new connector face complies with the
following requirements:
• Maximum data rates through the configuration
of the contacts in conformance with Ethernet
technology.
• Minimal interaction and perfect shielding
through paired shielding of the contacts.
• Fault proof connection through coding of the
connector face. A connection error with other
8-pole M12’s is impossible.
Overmolded versions in different lengths and a
crimp connector for the local cabling are the first
system components for a comprehensive cabling
infrastructure solution by
HARTING
.
Cabling instructions
30 - 35 mm
12 mm
4
1. Remove cable sheath.
2. Draw up the braid.
3. Remove paired shielding.
4. Remove plastic foil.
5. Remove wire insulation.
6. Crimp contacts.
7. Attach locknut and seal.
8. Pull braid apart.
9. Attach shield element
(braid lies between seal and
shield element).
10. Place contact in insulator.
11. Lock cover on insulator and
insert insulator into housing.
Observe coding!
12. Remove excess braid.
13. Tighten locknut.
2
HARTING
har-speed
M12
har-speed
M12 connector
CHARACTERISTICS
• Cabling with crimp technology
• Compact, robust design
• Fully shielded
• Transfer class E
A
for 1 and 10 Gigabit Ethernet
• AWG 28 to AWG 24
• Temperature range -40 °C to 85 °C
• Protection class IP 65 / IP 67
Identification
har-speed
M12 connector
Part number
21 03 881 5805
har-speed
M12 PCB receptacle
CHARACTERISTICS
• Stable, industrial standard design
• Fully shielded
• Transfer class E
A
for 1 and 10 Gigabit Ethernet
• Temperature range -40 °C to 70 °C
• Protection class IP 65 / IP 67
Identification
har-speed
M12 PCB receptacle
Part number
21 03 381 2801
har-speed
M12 system cable
CHARACTERISTICS
• Transfer class E
A
for 1 and 10 Gigabit Ethernet
• Temperature range -40 °C to 70 °C
Length
1m
3m
5m
7m
10 m
Part number
21 03 483 1801
21 03 483 1803
21 03 483 1805
21 03 483 1807
21 03 483 1810
har-speed
M12 accessories
Identification
Contacts
Locator
Crimping tool
Part number
21 01 100 9014
61 03 600 0065
09 99 000 0501
Further products and information under www.HARKIS.HARTING.com
People | Power | Partnership
3
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
