Product Data Sheet
FX-104
Frequency Translator
Features
• Output frequencies up to 777.60 MHz
• Jitter Generation OC-192 compliant
• Jitter transfer per GR-253-CORE
• Single 5 or 3.3 Vdc supply
• Locked to specified Input frequency, e.g. 8 kHz
• 1" x 0.8" x 0.25", Surface Mount (FR4 base)
Applications
• SONET / SDH / ATM
• DWDM / FDM
• DSL-PON Interconnects
• FEC (Forward Error Correction)
FX-104 Frequency Translator
Description
Vectron's FX-104 is a SAW based frequency translator
which is used to translate any input frequency such as
8 kHz, 1.544 MHz, 2.048 MHz, 19.440 MHz etc. to any
specific frequency from 170 MHz to 777.6 MHz. The
input frequency does not have to be a 50/50% duty
cycle and as an example can be an 8 kHz signal with a
logic high "on time" of only 1us, such as a BITS clock.
The FX-104 also has the ability to translate any of 1 to
4 different input frequencies to one common output fre-
quency, such as input frequencies of 8 kHz and 1.544
MHz and 19.44 MHz and any other frequency between
333 Hz and 170 MHz translating them to any specific
output frequency from 170 MHz to 777.600 MHz.
The "Input Frequency tracking capability" is the total
amount of input frequency deviation in which the FX-
104 is guaranteed to track or translate. As an example,
a typical input clock would be 8 kHz ±20 ppm. The FX-
104 is guaranteed to track at least ±40 ppm of error over
temperature/ aging/ power supply and is more than
twice what most applications require. The PLL control
voltage is brought out through a 470K ohm resistor. This
would allow for the use of external circuitry (analog
comparators or an A/D converter plus a processor) to
detect when the control voltage is getting close to the
limits of the pull range.
Performance Characteristics
Parameter
Output Frequencies
Supply Voltage,
Supply Current
Input Signal,
OUTPUT,
V
OL
C
= 5 Vdc
D
= 3.3 Vdc
A
= HCMOS
D
= PECL
F
= Comp PECL
V
cc
V
cc
I
cc
CLKIN
CLKIN
---
V
OL
V
OH
t
R
/t
F
Sym
Symbol
Min
155.52
4.75
3.15
Typical
5.00
3.30
95
HCMOS
PECL
PECL
Max
777.6
5.25
3.45
125
Unit
MHz
Vdc
Vdc
mA
---
---
---
V
V
ps
%
ps
ps
dB
ppm
---
V
cc
-1.95
V
cc
-0.98
45
---
V
cc
-1.63
V
cc
-0.75
400
55
1
5
0.1
V
OH
Rise/Fall Time (20% to 80%)
Output Symmetry
Jitter Generation, rms
(12 kHz to 20 MHz)
Jitter Generation, rms
(cycle to cycle method)
Jitter Transfer, GR-253-CORE sec 5.6.2.1.2
Input Frequency Tracking Capability
(Can translate a Stratum 1,2,3,3E,4
or SONET Min source)
Operating Temperature
Size
250
49/51
0.23
3
APR
±40
Temp Range
C
= 0°C to +70°C
Temp Range
F
= -40°C to +85°C
25.4 x 20.32 x 6.35 mm (1.0” x 0.8” x 0.25”)
Vectron International •
267 Lowell Road, Hudson, NH 03051
• Tel: 1-88-VECTRON-1 • Web: www.vectron.com
FX-104 Frequency Translator
Outline Drawing
Pin Out
Pin
1
Symbol
CLKIN
Function
Input Frequency
- The FX-104 series AC couples the input, this means the unit is capable of
handling HCMOS, LvHCMOS, PECL and LvPECL input signals.
(For Input Frequencies below 1 MHz only HCMOS and LvHCMOS are supported)
Ground
Lock Detect
Logic “1” indicates a locked condition
Logic “0” indicates that no input signal is present or the input signal has moved out of the
lock range.
PLL/ VCXO control voltage
Under locked conditions, should be >0.3V and <3.0V for the 3.3 volt option or >0.5V and
<4.5V for the 5 volt option. Input frequency may be out of range if voltage exceeds these limits.
Missing
No Connection
Ground
No connect
Logic “0”
Output
Complementary Output
No Connection
Do not Exceed Vcc
Do not Exceed Vcc
No Connection
Ground
Power Supply Voltage (5 Vdc or 3.3Vdc)
=
=
Output enabled
Output disabled
2
3
GND
LD
(output)
4
Monitor
(Output)
---
NC
GND
Enable
Disable
Out
COUT
NC
Select A
Select B
NC
GND
V
cc
5
6
7
8
9
10
11
12
13
14
15
16
Vectron International •
267 Lowell Road, Hudson, NH 03051
• Tel: 1-88-VECTRON-1 • Web: www.vectron.com
FX-104 Frequency Translator
Pad Layout
Recommended Reflow Profile
NOTE:
The FX-100 series should not be subjected to a wash process that will immerse it in solvents. NO CLEAN is the rec-
ommended procedure. The FX-100 series has been designed for pick and place reflow soldering. The suggested reflow pro-
file is shown above. The FX-100 series may be reflowed once, and should not be reflowed in the inverted position.
Vectron International •
267 Lowell Road, Hudson, NH 03051
• Tel: 1-88-VECTRON-1 • Web: www.vectron.com
FX-104 Frequency Translator
Standard Shipping Method
The Standard ship method for volume production of the
FX-100 series is in a matrix tray. These trays are 100%
recyclable. The trays also offer the added feature that
they can be continuously feed into a pick-n-place
machine eliminating the down time required with tape-
n-reel.
Handling Precautions
Although protection circuitry has been designed into this
device, proper precautions should be taken to avoid
exposure to electrostatic discharge (ESD) during han-
dling and mounting. VI employs a human-body model
(HBM) for ESD-susceptibility testing and protection
design evaluation.
ESD voltage thresholds are dependent on the circuit
parameters used to define the mode. The HBM ESD
threshold presented here was obtained by using para-
meters where resistance = 1500 ohms, capacitance =
100pf)
ESD Threshold Voltage
Model
Human Body (HBM)
Threshold
500
Unit
V min
Vectron International •
267 Lowell Road, Hudson, NH 03051
• Tel: 1-88-VECTRON-1 • Web: www.vectron.com
模拟与混合信号
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
