Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2010. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■
Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■
Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■
All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■
The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
“TAIYO
YUDEN’ official sales channel”
tors (so called
s
).
It is only applicable to the products purchased from any of TAIYO YUDEN’ official sales channel.
s
■
Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■
Caution for export
Certain items in this catalog may require specific procedures for export according to
“Foreign
Exchange and For-
eign Trade Control Law”of Japan,
“U.S.
Export Administration Regulations” and other applicable regulations.
,
Should you have any question or inquiry on this matter, please contact our sales staff.
1
1
notice_e-01
RING VARISTORS
■
FEATURES
◦
se of strontium titanate semiconductor ceramics.
U
◦
arge net voltage non-linear coefficient (
α
) of 3 to 7, and large
L
ele ctrostatic capacitance of 10 to 150 nF. Noise can thus be
absorbed over a wide range of frequencies.
◦
urface electrode type/Side mount electrode type
S
■
APPLICATIONS
◦
liminates sparks between governor contact and commutator and
E
brushes; absorbs noise in micro motors.
■
ORDERING CODE
S
❶
S
❶Material
STR
R
❷
J
❸
△ △
❹
❸External
Dimension
φD
〔mm〕
8.6
6.0※
8.0※
0
4
❺
0
F
❻
3
❼
○ ○ ○ ○
½
❻Upper
Limit Voltage [V]
A
1
B
2
C
3
D
4
E
5
F
6
G
7
H
8
I
9
J
0
❼Number
of
Electrode
3
3Poles
5
5Poles
½Internal
Code
△△△△
Standard
△＝Blank
Space
❺Nominal
Lower Limit Voltage
E
10
[V]
example
Number×0.1
B△
H△
J△
❷Electrode
Position
S
Side
R
Surface
020
176
❹Individual
Spec
Standard
△＝Blank
Space
2.0
17.6
△＝Blank
Space
※mark
indicates non-standard code
for custom design development.
△
■
EXTERNAL DIMENSIONS
Surface Electrode Type (SRJC)
Side Electrode Type (SSB)
Fig.
φD
φd
T
8.50±0.20
(0.335±0.008)
5.00±0.20
(0.197±0.008)
0.65＋0.10/ー0.15
(0.026＋0.004/ー0.006)
8.60±0.20
(0.339±0.008)
5.00±0.20
(0.197±0.008)
0.75 max.
(0.030 max.)
Unit : mm
（Inch）
■
PART NUMBERS/MINIMUM QUANTITY
Ordering
code
SRR
SRPP
SRJA
SRJC
SRG
SRHN
SRHTT
SRHVP
Side
Electrode
SSB
SSKT
SSJ
EHS (Environmental
Outside diameter Inside diameter
Hazardous
φD
[mm]
φd
[mm]
Substances)
RoHS
12.70±0.40
9.50±0.30
RoHS
12.00±0.30
6.95±0.15
RoHS
8.50±0.25
5.80±0.15
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
8.50±0.20
5.85±0.15
4.20±0.15
3.00±0.12
2.80
＋0.05
－0.15
8.60±0.20
7.80±0.20
6.80±0.15
5.00±0.20
＋0.10
4.10
－0.05
＋0.20
2.80
－0.10
Thickness
T [mm]
1.30 max.
1.10 max.
0.65±0.15
0.65
＋0.10
－0.15
0.5±0.1
0.50
＋0.10
－0.20
0.55 max.
0.50 max.
0.75 max.
0.55±0.10
0.75 max.
Measuring
Current
[mA]
E
10
Voltage
[V]
13.0 to 50.0
4.0 to 60.0
2.0 to 35.0
Non-linear Number of
coefficient Electrode
3 or 5
3 or 5
Surface Electrode
Minimum Quantity
[pcs]
Case Package
1000
2000
3000
10
2.0 to 35.0
3.0 to 9.0
2.0 to 6.5
3.0 to 6.5
2.5 to 6.0
2.0 to 14.0
≧2.0
3
2.15±0.10
1.90
＋0.15
－0.00
5.00±0.20
＋0.20
5.35
－0.10
6000
10
4.0 to 16.0
2.0 to 20.0
≧2.0
3
4000
3000
4.70±0.15
※We
have various shape besides the above. We will cope with the custom about the shape and the character after consultation.
＊
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
182
1
1
ringvaristor01_e-01
■
PACKAGING
Minimum Quantity
Type
SRR
SRPP
SRJA
SRJC
SRG
SRHN
SRHTT
SRHVP
SSB
SSKT
SSJ
Minimum Quantity [pcs]
Case Package
1000
2000
3000
3000
3000
6000
6000
6000
4000
4000
3000
＊
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
ringv01_reli_e-01
1
1
ringv01_reli-PRP1
■
RELIABILITY DATA
RING VARISTORS
1. Operating Temperature Range
Specified Value
2. Storage Temperature Range
Specified Value
3. Rated Power
Specified Value
4. E
10
Characteristic
Specified Value
【Test
Methods and Remarks】
(at 25±5℃)
ー25½＋120℃
For the range of 50 to 120℃, refer to the derating curve.
ー25½＋120℃
Refer to the individual specification
Refer to the individual specification
E : Constant-current source
A : Digital ammeter
V : Digital voltmeter
E
10
: Voltage at reference current with application of 10mADC
Input waveform is square wave. (Width : 50m sec., max.)
5. Non-linear Coefficient Rated
α
(at 25±5℃)
Refer to the individual specification
Specified Value
【Test
Methods and Remarks】
Difinitionα=
1
logE
10
／E
1
E
1
: Voltage at reference current with application of 1mADC
E
10
: Voltage at reference current with application of 10mADC
E : Constant-current source
A : Digital ammeter
V : Digital voltmeter
E
10
: Voltage at reference current with application of 10mADC
Input waveform is square wave. (Width : 50m sec., max.)
6. Capacitance
Specified Value
【Test
Methods and Remarks】
Measuring frequency : 1kHz±10%
Measuring voltage
: 1.0±0.5Vrms
Measuring temperature : 25±5℃
7. Tangent of Loss Angle (tanδ)
Specified Value
【Test
Methods and Remarks】
Measuring frequency : 1kHz±10%
Measuring voltage
: 1.0±0.5Vrms
Measuring temperature : 25±5℃
Refer to the individual specification
Refer to the individual specification
8. Temperature Characteristic of Capacitance
Specified Value
Refer to the individual specification
【Test
Methods and Remarks】
Measurement of voltage at reference current at 25℃ and 50℃shall be made for the calculation by the following equation.
E
10
（50℃）
10
ーE （25℃）
100
×
（％/℃）
α＝
50℃ー25℃
（25℃）
E
10
Change of maximum capacitance deviation in step 1 to 5
Temperature at step 1 : 25℃ (Reference temperature)
Temperature at step 2 : 50℃
9. Pulse
Specified Value
【Test
Methods and Remarks】
Refer to the individual specification
R1 : 2kΩ
C1 : 35±5μF
E
1
: Individual specification
Number of pulse application : 10 times
Measuring temperature
: 25±5℃
10. Body Strength
Specified Value
【Test
Methods and Remarks】
Refer to the individual specification
Pressing force : Refer to Individual specification
L
: Depends upon the sample size
11. Adhesion of Electrode
Specified Value
No detachment of electrode or sign of such defects
【Test
Methods and Remarks】
Lead wire shall be soldered perpendicularly onto the electrode, then pulled out perpendicularly.
Speed to pull out : 2.5cm／2sec.
Solder to be used : Eutectic solder
＊
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
ringv01_reli-PRP2
1
1
ringv01_reli_e-01
■
RELIABILITY DATA
RING VARISTORS
12. Resistance to Soldering Heat
Specified Value
E
10
: Within
±20％, α
: Refer to the individual specification
【Test
Methods and Remarks】
Temperature at the tip of soldering iron : 280±5℃, 300±5℃
Duration : 2 sec.
Preheating temperature : 150℃, 170℃
Recovery : 1 hr of recovery under the standard condition after the test.
13. Resistance to Solvent
Specified Value
No significant abnormality in appearance and legible marking.
14. Damp Heat
Specified Value
E
10
: Within
±20％, α
: Refer to the individual specification
【Test
Methods and Remarks】
Temperature : 60±10℃
Humidity
: 90 to 95% RH
Duration
: 300±8 hrs
Recovery
: 1 hr of recovery under the standard condition after the removal from test chamber.
Measuring conditions : E
1
= Current application for 30 sec.
E
10
= Current application for 60 sec.
15. DC Load Resistance
Specified Value
【Test
Methods and Remarks】
E
A
V
R
E
10
: Within
±20％, α
: Refer to the individual specification
: Constant-current source
: Digital ammeter
: Digital voltmeter
: Load adjusting variable resistor
P=Ⓥ×Ⓐ
Test environment : standard condition
Current : Refer to the individual specification
Duration : 300±8 hrs
Recovery : 1 hr of recovery under the standard condition after the removal from test chamber.
Note on standard condition :
"standard condition" referred to herein is defined as follows :
5 to 35℃ of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results :
In order to provide correlation data, the test shall be conducted under condition of 25±2℃ of temperature, 60 to 70% relative humidity and 86 to 106kPa of air pressure.
Unless otherwise specified, all the tests are conducted under the "standard condition."
＊
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
ABI Research最近评选并公布了全球超高频无源和高频无源 RFID芯片的前十大制造商。 前十大超高频无源芯片制造商是： 前十大高频无源芯片制造商是： 超高频的得奖名单并不出人意外，因为实际上似乎总是前三家公司获得大订单。ABI分析家 Mike Liard称，ABI很容易就评选出 Alien、Avery,和 Raflatac为全球...[详细]
模拟电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
