WIRELESS INDUSTRIAL SOLUTIONS
Wireless LAN
)))
23 mm
36 mm
Product Brief OWSPA311g
The SERIAL WIRELESS LAN
MODULE
TM
from connectBlue has
been developed for integration in
industrial devices providing state
of the art low power features.
The module minimizes the work
needed to implement Wireless LAN
(IEEE 802.11b/g) in a device as it
provides all software, hardware,
type approval, EMC certification
etc. It is developed for reliable,
high demanding industrial devices
and applications and requires no
host driver.
The Serial Wireless LAN Module is a complete Wireless LAN implementa-
tion. The Wireless LAN module has a small form factor and the interface
layout is the same as the Bluetooth modules from connectBlue, which
enables customers to prepare their device for both Bluetooth and/or
Wireless LAN.
Key Features
• Supports both 802.11b and 802.11g
• Radio type approved for Europe
• Radio type approved for US and Canada
• Compliant with EMC standards
• Industrial temperature range -30 to +85 C
• Exceptional low power modes
• Compatible with connectBlue Bluetooth modules
• Supports security features WEP64, WEP128, WPA-PSK, WPA2-PSK
(TKIP/AES), LEAP
• Ad-hoc and infrastructure mode
• Internal or dual external antennas (diversity supported)
• UART speed up to 2.7Mbps
• Custom baud rate
TM
Technical Data
SPECIfICATIONS
PHY/MAC
802.11b and 802.11g
Extended rate protection
Regulatory domain support
Advanced power management
Defragmentation
Antenna diversity
Operational modes
BSS (infrastructure)
IBSS (ad-hoc)
Security
WEP64
WEP128
WPA-PSK
WPA2-PSK
TKIP
CCMP (AES)
LEAP
Software
All software is included in the module
Configurable locally or over Wireless LAN using
AT commands or PC Wizard (Wizard included)
Protocols
TCP
UDP
Additional Features
TX power calibration
Link adaptation
Advanced power management
DHCP-client
DNS-resolver
Roaming
Connect on data trigger
Serial interface
UART Logic-Level
Supported baud-rates: 300 - 2.7Mbps
Support for non-standard baud rates
flow control: CTS/RTS or none
full modem signalling
Connectors
Board-to-board connector
Solder pads
JST 6-pin connector (optional)
Antennas
Internal or single and dual external (diversity)
Power
3.3-5.5 VDC
Transmitting
at full speed:
130 mA @ 5 VDC
Sleep mode
(connected):
7.4 mA @ 5 VDC
Stop mode
(disconnected):
0.76 mA @ 5 VDC
Dimensions
23 x 36 x 3.1 mm
Weight
3.8 g
Type Approval
R&TTE (Europe)
FCC/CFR 47 part 15 unlicensed modular transmitter approval
IC (Industrie Canada)
Environmental
Maximum operating temperature: -30 - +85 °C
Storage temperature: -40 - +85°C
Humidity RH 5-90% non-condensing
Shock and vibration: IEC 61131-2
Certifications and Compliance
R&TTE Directive 1999/5/EC
EN 300 328 V1.6.1 (2004-11)
EMC Directive: 89/336/EEC
EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-17 V1.2.1 (2002-08)
EN 61000-6-2 (2001)
Safety Compliance
EN 60950-1:2001 and/or IEC 60950-1:2001 (1st Edition)
EN 60950-1/A11:2004 + Corrigendum:2004
Order Number
cB-OWSPA311gi-04
cB-OWSPA311gi-06
cB-OWSPA311gx-04
cB-OWSPA311gx-06
OEM Wireless LAN module Internal Antenna and
Standard Connectors
OEM Wireless LAN module Internal Antenna and
JST 6-pin connector
OEM Wireless LAN module External Antenna and
Standard Connectors
OEM Wireless LAN module External Antenna and
JST 6-pin connector
TM
HEAD OffICE: connectBlue AB
•
Norra Vallgatan 64 3v
•
SE-211 22 Malmö
•
Sweden
•
Phone +46 40-6307100
•
Fax +46 40-237137
US OffICE: connectBlue, Inc.
•
1460 N. Sandburg Terrace, Suite 803
•
Chicago, IL 60610
•
USA
•
Phone +1 (312) 927 5859
•
Fax +1 (312) 277 3209
info@connectblue.com
•
us-info@connectblue.com
•
www.connectblue.com
Printed in Sweden. ©2008 connectBlue AB. All rights reserved. All specifications are subject to change without notice. The connectBlue word mark and logo are
owned by connectBlue AB. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by connectBlue is under license.
cBProduct-0606-02 (1.2)
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
