EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Infrared Remote-control Receiver Module
IRM-26xx SERIES
Features
‧High
protection ability against EMI .
‧Circular
lens to improve the receive characteristic.
‧Line-up
for various center carrier frequencies.
‧Low
voltage and low power consumption.
‧High
immunity against ambient light.
‧Photodiode
with integrated circuit.
‧TTL
and CMOS compatibility.
‧Long
reception distance.
‧High
sensitivity.
‧Suitable
burst length
≧
10 cycles/burst.
‧
Pb free.
‧
The product itself will remain within RoHS compliant version
.
Descriptions
The IRM-26xx SERIES are miniaturized receivers for infrared
remote control systems. PIN diode and preamplifier are
assembled on lead frame, the epoxy package is designed as IR
filter. The demodulated output signal can directly be decoded
by a microprocessor. IRM-26xx SERIES is the standard IR
remote control receiver series, supporting all major transmission
codes.
Applications
․Light
detecting portion of remote control
․AV
instruments such as Audio, TV, VCR, CD, MD, etc.
․Home
appliances such as Air-conditioner, Fan , etc.
․The
other equipments with wireless remote control.
․CATV
set top boxes
․Multi-media
Equipment
PART
Chip
Compound
MATERIAL
Silicon
Epoxy
COLOR
---
Black
Everlight Electronics Co., Ltd.
Device No：SZDMO-026-041
http:\\www.everlight.com
Prepared date：20-Aug-2006
Rev 1
Page: 1 of 9
Prepared by：HYPENG
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-26xx SERIES
Package Dimensions
OUT
GND
V cc
Notes:
1.All dimensions are in millimeters.
2.Tolerances unless dimensions
±0.3mm.
Available Types For Different Carrier Frequencies
Type
IRM-2633
IRM-2636
IRM-2638
IRM-2640
IRM-2656
Carrier Frequencies (Typ)
33 kHz
36 kHz
38 kHz
40 kHz
56 kHz
Everlight Electronics Co., Ltd.
Device No：SZDMO-026-041
http:\\www.everlight.com
Prepared date：20-Aug-2006
Rev 1
24±1.0
Page: 2 of 9
Prepared by：HYPENG
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-26xx SERIES
Absolute Maximum Ratings (Ta=25℃)
Parameter
Supply Voltage
Operating Temperature
Storage Temperature
Soldering Temperature
Symbol
Vcc
Topr
Tstg
Tsol
Rating
0~6
-25 ~ +85
-40 ~ +85
260
Unit
V
℃
℃
℃
4mm from mold body
less than 10 seconds
Notice
Recommended Operating Condition
Supply Voltage Rating: Vcc 4.5V to 5.5V
Electro-Optical Characteristics (Ta=25℃, and Vcc=5.0V)
Parameter
Consumption Current
Peak Wavelength
Reception Distance
Half Angle(Horizontal)
Half Angle(Vertical)
High Level Pulse Width
Low Level Pulse Width
High Level Output Voltage
Low Level Output Voltage
Symbol
Icc
λ
p
L
0
L
45
Θ
h
Θ
v
T
H
T
L
V
H
V
L
MIN.
---
---
14
6
---
---
400
400
4.5
---
TYP.
1.2
940
---
---
45
45
---
---
---
0.2
MAX.
---
---
---
---
---
---
800
800
---
0.5
deg
deg
μs
μs
V
V
At the ray axis
*2
At the ray axis
*1
Unit
mA
nm
m
Condition
No signal input
*1:The ray receiving surface at a vertex and relation to the ray axis in the range of
θ=
0° and
θ=45°.
*2:A range from 30cm to the arrival distance. Average value of 50 pulses.
Everlight Electronics Co., Ltd.
Device No：SZDMO-026-041
http:\\www.everlight.com
Prepared date：20-Aug-2006
Rev 1
Page: 3 of 9
Prepared by：HYPENG
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-26xx SERIES
The Notice of Application:
Transmission o remote control signal consist of four parts: Encode Part, IR Transmitter Source,
IRM device, Decode Part
1. When IRM-26xx code select frequency, it need to well understand the center system of
encode part.
2. Strong or weak light of IR Transmitter can affect distance of transmission.
3. Minimum Burst Length Tburst (number of pulses per burst) : 10 cycles
4. It needs to ensure the translation range of decode part if it is applied to the pulse-width range.
If the above items hardly assure of its application, it’ll cause NG(no good) message from the edge
of signal.
Test Method：
The specified electro-optical characteristics is satisfied under the following
Conditions at the controllable distance.
Measurement place
A place that is nothing of extreme light reflected in the room.
External light
Project the light of ordinary white fluorescent lamps which are not high
Frequency lamps and must be less then 10 Lux at the module surface.
(Ee≦10Lux)
Standard transmitter
A transmitter whose output is so adjusted as to
Vo=400mVp-p
and the output
Wave form shown in Fig.-1.According to the measurement method shown in
Fig.-2 the standard transmitter is specified.
However , the infrared photodiode to be used for the transmitter should be
λp=940nm,∆λ=50nm.
Also, photodiode is used of PD438B(Vr=5V).
Measuring system
According to the measuring system shown in Fig.-3
Fig.-1
Transmitter Wave Form
D.U.T output Pulse
Carrier frequency is adjusted to
center frequency of each product.
OUTPUT PULSE
OF DEVICE
IR TANSMITTER
OUTPUT WAVE FORM
Duty=0.5
Everlight Electronics Co., Ltd.
Device No：SZDMO-026-041
http:\\www.everlight.com
Prepared date：20-Aug-2006
Rev 1
Page: 4 of 9
Prepared by：HYPENG
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-26xx SERIES
Fig.-2
Measuring Method
20cm
10k
+5.0± 0.1V
L: Transmission Distance
Fig.-3
Measuring System
10uF
θ
θ
Vcc
OUT
D.U.T
Vout
Standard Transmitter
Standard Transmitter
100k
Vout
GND
Oscilloscope
θ: Angle Of Horizontal & Vertical Direction
Block Diagram：
Vs
IN
Input
CGA & filter
Demodulator
OUT
µC
Oscillator
Carrier frequency f0
AGC/ATC & digital control
Modulated IR signal
min 10 pulses
GND
Application Circuit：
RC Filter should be connected closely between Vcc pin and GND pin.
Everlight Electronics Co., Ltd.
Device No：SZDMO-026-041
http:\\www.everlight.com
Prepared date：20-Aug-2006
Rev 1
Page: 5 of 9
Prepared by：HYPENG
电子竞赛
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
