N5 ANT SoC Module Series
ANT Operation (when loaded with S210 or S310
SoftDevice)
79 selectable RF channels (2402 to 2480 MHz)
Simple to complex network topologies: peer-to-peer,
star, tree, star-to-star and more
Broadcast, acknowledged, and burst data
communication modes
Supports up to 8 logical channels each with
configurable channel periods (5.2ms - 2s)
Built-in device search and pairing
Built-in interference handling and radio coexistence
management with application radio disable requests
and application flash write/erase requests
Enhanced ANT features
-
-
-
-
Advanced burst data transfer modes (up to 60kbps)
Optional single channel encryption mode (AES -128)
Supports up to 8 public, private and/or managed
networks
Advanced power management features to optimize
application power consumption including Event
Filtering and Selective data updates
-
-
Asynchronous transmit channel
Fast channel initiation
Module Hardware
Integrated PCB meander antenna
Onboard 32kHz and 16MHz crystal clocks
1.8V to 3.6V supply voltage range
DC-DC converter
-25°C to +75°C operating temperature
24 GPIOs (LGA package)
Programmable output per channel from –20dBm
up to +4dBm
Excellent receiver sensitivity
-90dBm ANT mode
-93dBm BLE mode
1dBm resolution RSSI
Total 256kB embedded flash memory and 16kB
RAM
SPI, I2C and UART interface
ARM SWD interface
14.0x9.8x2.0mm (LGA package)
Drop-in compatible options with AP2/C7 modules
Radio regulatory approval for major markets
BLUETOOTH SIG qualification
RoHS compliant
BLUETOOTH
®
low energy peripheral Operation (when
loaded with S110, S120, S130 or S310 SoftDevice)
BLUETOOTH 4.0 or 4.1 compliant low energy single-
mode protocol stack depending on the SoftDevice
-
-
-
-
-
-
Link Layer
L2CAP,ATT, and SM protocols
GATT,GAP, and L2CAP
Peripheral and Broadcaster roles
GATT Client and Server
Full SMP support including MITM and OOB pairing
Series Members
-
-
-
N548M8CB: 14x9.8mm LGA
N548M4CB: 20x20mm SMT
N548M5CB: 20x20mm Molex connector
All these modules are pre-loaded with S210 SoftDevice
and an ANT network processor code
D00001598
Rev1.3
Page 2 of 24
N5 ANT SoC Module Series, Rev 1.3
Table of Contents
1.
N5 ANT SoC Module Series ...........................................................................................................................5
1.1
1.2
1.3
1.4
2.
Nomenclature ................................................................................................................................. 5
Production Tracking Code ................................................................................................................ 5
Offerings ........................................................................................................................................ 6
N548 ANT SoC Module Starter Kit .................................................................................................... 6
Product Overview..........................................................................................................................................8
2.1
2.2
2.3
2.4
Block Diagram ................................................................................................................................ 8
Pin-outs .......................................................................................................................................... 8
Application Code and Programming ................................................................................................. 9
Design Considerations ................................................................................................................... 10
2.4.1
2.4.2
2.4.3
2.5
M8 Module Mounting ...................................................................................................... 10
M4 Module Mounting ...................................................................................................... 10
M5 Module Mounting ...................................................................................................... 11
Assembly Considerations ............................................................................................................... 11
2.5.1
2.5.2
Moisture Control ............................................................................................................. 11
Solder Stencil Design of M8 Module ................................................................................. 11
3.
Regulatory Approvals and Compliances....................................................................................................12
3.1
3.2
3.3
3.4
3.5
3.6
United States ................................................................................................................................ 12
Canada ......................................................................................................................................... 12
European Economic Area ............................................................................................................... 13
Australia & New Zealand ............................................................................................................... 13
Japan ........................................................................................................................................... 13
BLUETOOTH Qualification .............................................................................................................. 13
4.
Electrical Specifications ..............................................................................................................................14
4.1
4.2
4.3
4.4
Absolute Maximum Ratings............................................................................................................ 14
Recommended Operating Conditions ............................................................................................. 14
Radio Operation Specifications and Antenna Characteristics ............................................................ 14
Electrical Specifications ................................................................................................................. 15
5.
6.
Mechanical Drawings ..................................................................................................................................16
Support ........................................................................................................................................................19
6.1
6.2
6.3
6.4
ANT Forum ................................................................................................................................... 19
Technical References .................................................................................................................... 19
ANT Developer’s Zone ................................................................................................................... 19
ANT and ANT+ Social Media .......................................................................................................... 19
Appendix: Using the ANT Network Processor Configuration ...........................................................................21
Pin Assignments in the ANT Network Processor Configuration ........................................................... 21
Async Mode Baud Rate Select .......................................................................................................... 22
Async Mode Baud Connection Example ............................................................................................ 23
Byte Sync Mode Connection Example ............................................................................................... 24
dynastream.com
thisisant.com
N5
ANT SoC Module Series, Rev1.3
Page 3 of 24
Notices and Restricted Use Information
Information contained in this document is provided only for your ("Customer" or “you”) convenience and may be
superseded by updates. It is your responsibility to ensure that your application meets with your specifications.
Dynastream Innovations Inc. ("DYNASTREAM") makes no representations or warranties of any kind whether
express or implied, written or oral, statutory or otherwise, related to the information, including but not limited to
its condition, quality, performance, merchantability or fitness for purpose. DYNASTREAM disclaims all liability
arising from this information and its use.
DYNASTEAM does not assume any responsibility for the use of the described ANT module (“the Module(s)”).
Dynastream makes no representation with respect to the adequacy of the module in low-power wireless data
communications applications or systems. Any Products using the Module must be designed so that a loss of
communications due to radio interference or otherwise will not endanger either people or property, and will not
cause the loss of valuable data. DYNASTREAM assumes no liability for the performance of products which are
designed or created using the Modules.
The Modules are not designed, intended, or authorized for use as components in systems intended for surgical
implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the Module could create a situation where personal injury or death may occur. If you use the
Modules for such unintended and unauthorized applications, you do so at your own risk and you shall indemnify
and hold DYNASTREAM and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim
of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
DYNASTREAM was negligent regarding the design or manufacture of the Product.
The information disclosed herein is the exclusive property of DYNASTREAM, and is not to be reproduced and/or
distributed without the written consent of DYNASTREAM. No part of this publication may be reproduced or
transmitted in any form or by any means including electronic storage, reproduction, execution or transmission
without the prior written consent of DYNASTREAM. The recipient of this document by its retention and use agrees
to respect the security status of the information contained herein.
DYNASTREAM believes the information contained herein is correct and accurate at the time of its release.
However, the information contained in this document is subject to change without notice and should not be
construed as a commitment by DYNASTREAM unless such commitment is expressly given in a covering document.
One Year Limited Warranty
This product is warranted to be free from defects in materials or workmanship for 1 year from the date of
purchase of the end customer. Within this period, Dynastream Innovations Inc. (Dynastream) will, at its sole
option, replace any products that fail in normal use. Such replacement will be made at no charge to distributors or
companies who purchase this product directly from Dynastream, provided the distributor or company shall be
responsible for any transportation cost. This warranty does not apply to: (i) cosmetic damage, such as scratches,
nicks and dents; (ii) damage caused by accident, abuse, misuse, water, flood, fire, or other acts of nature or
external causes; (iii) damage caused by service performed by anyone who is not an authorized service provider of
Dynastream; (iv) damage to a product that has been modified or altered without the written permission of
Dynastream. In addition, Dynastream reserves the right to refuse warranty claims against products or services that
are obtained and/or used in contravention of the laws of any country.
Replaced products have 1 year warranty as stipulated in this term.
dynastream.com
thisisant.com
Page 4 of 24
N5 ANT SoC Module Series, Rev 1.3
THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE.
IN NO EVENT SHALL DYNASTREAM BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM
DEFECTS IN THE PRODUCT.
Dynastream retains the exclusive right to replace (with a new or newly-overhauled replacement product) the
device or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE THE
SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.
To obtain warranty service, the distributor or company shall contact Dynastream for shipping instructions and a
return material authorization (RMA) tracking number. Securely pack the device and a copy of the original sales
receipt, which is required as the proof of purchase for warranty claims. Write the tracking number clearly on the
outside of the package. Send the device, freight charges prepaid, to Dynastream.
©2014 Dynastream Innovations Inc. All Rights Reserved.
dynastream.com
thisisant.com
N5
ANT SoC Module Series, Rev1.3
Page 5 of 24
1. N5 ANT SoC Module Series
Based on Nordic Semiconductor’s nRF51422 SoC, the N5 ANT SoC module series offers support for both ANT®
and Bluetooth® low energy and enables both protocols to run concurrently, depending on the loaded protocol
stack.
The N5 ANT SoC module series starts with N548M8CB in a 14.0mm x 9.8mm x 2.0mm LGA (Land Array Grid)
package. A compact design meeting the market requirements for small, light and wearable, the N548M8CB is a
turnkey system hardware solution including antenna, onboard 32k and 16M crystal clocks, DC-DC converter and 24
GPIOs with 6 analogue inputs.
Nordic Semiconductor protocol stacks, also known as SoftDevices, are pre-compiled, pre-linked binary files, which
are downloadable from the Nordic Semiconductor’s web site and can be programmed onto the N5 ANT SoC
module series. The N548 modules are pre-programmed with the S210 SoftDevice (ANT 8-channel protocol stack)
and ANT network processor application reference code in order to function as a legacy ANT RF module when
connected to an application controller. Both pre-programmed images can be easily replaced via the onboard SWD
interface pins using off-the-shelf ARM programming tools.
Pin compatible options to the 20mm x 20mm AP2 or C7 modules from Dynastream are also available. In these
options, N548M8CB modules are soldered on carrier boards that are pin compatible to the previous modules.
Current AP2 or C7 module customers can easily use these models to evaluate the hardware and upgrade their final
products.
The N5 module series if loaded with ANT and/or BLUETOOTH Low energy stack has been certified to comply with
radio regulation or standards covering major markets include North America, Europe, Australia, New Zealand and
Japan. The N5 ANT SoC modules series has also been qualified by the BLUETOOTH SIG.
1.1
Nomenclature
N5 48 M8 C B
N5 module
series
Module PACKAGE
B
= Standard Factory Load
M4
= 20x20 mm with PCB edge pins
M5
= 20x20 mm with Molex Connector
M8
= 14x9.8 mm LGA
Software Loaded
48 = ANT stack (S210
SoftDevice) with ANT NP code
C
ommercial temperature
range -25 - +70
o
C
Figure 1: N5 ANT SoC Module Series Nomenclature
1.2
Production Tracking Code
For technical support and customer service purposes, a production code of three characters is laser marked on the
RF shield as illustrated below.
dynastream.com
thisisant.com
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
