Embedded Power for
Business-Critical Continuity
NLP150L Series
Quad output
Rev.02.20.07
NLP150L Series
1 of 5
Total Power:
110-150W
Input Voltage: 90 - 264VAC
# of Outputs: Quad
Special Features
• 90 VAC to 264 VAC
universal input range
• Provides low voltage
outputs (3.3 V)
• EN61000-3-2 compliant
• Overvoltage and
short circuit protection
• Power fail detection
• Current sharing
(on VA and VB)
• 3.8 x 7.8 x 1.26 inches
• UL, CSA and VDE
safety approvals and
CE-marked to LVD
• Compliance to EN55022-B
conducted noise standard
• Compliance to EN55022-A
radiated noise standard
• Meets all applicable and
relevant immunity standards
EN61000-4-2, -3, -4, -5 and -6
• Available RoHS compliant
• 2 year warranty
The NLP150L series of 150 Watt ac-dc open-frame power supplies
are available with single, triple or quad outputs. The quad output
versions described in this datasheet are housed in a 3.8 x 7.8 x
1.26 inch package. All NLP150L series power supplies are
harmonic current corrected to meet the EN61000-3-2 standard,
and support current sharing. The power supplies are designed for
use in 1U shelves or boxes, and are primarily intended for
networking applications that have a heavy logic content, such as
access concentrators, midrange routers, LAN switches and shared
media hubs.
Safety
VDE 0805/EN60950/IEC950
File No. 10401-3336-0162/47587
Licence No. 123897
UL1950 File No. E136005
CSA C22.2 No. 950
File No. LR41062C
Embedded Power for
Business-Critical Continuity
Specifications
All specifications are typical at nominal input, full load at 25
°
C unless otherwise stated
Rev.02.20.07
NLP150L Series
2 of 5
OUTPUT SPECIFICATIONS
Total regulation
(Line and load)
Rise time
Transient response
Main output
Auxiliary outputs
At turn-on
Main output
75% to 100%
step at 0.1 A/μs
±2.0%
±5.0%
1.5 s, max.
5.0% or 250 mV
max. dev., 1 ms max.
recovery to 1%
±0.02%/°C
Main outputs
Cyclic operation
Single and multiple
125%, ±10%
Continuous
See table
EMC CHARACTERISTICS (continued)
(10)
Surge
Fast transients
Radiated immunity
Conducted immunity
GENERAL SPECIFICATIONS
Hold-up time
Efficiency
Isolation voltage
Approvals and
standards pending
Weight
Universal input
90-264 Vac
47-63 Hz
264 Vac (cold start)
264 Vac, 60Hz
120 Vac @ 150 W
230 Vac @ 150 W
UL/IEC127
40 A max.
0.99 mA
1.95 A rms
1.10 A rms
F3.15A H, 250 Vac
ENVIRONMENTAL SPECIFICATIONS
(8)
Thermal performance
Operating ambient,
(See derating curve)
Non-operating
50 °C to 70 °C ambient,
convection cooled
0 °C to 50 °C ambient,
convection cooled
0 °C to 50 °C ambient,
300 LFM forced air
Peak (0 °C to +50 °C)
Non-condensing
Operating
Non-operating
5-500 Hz
per MIL-STD-810E
0 °C to +50 °C
-40 °C to +85 °C
Derate to
50% load
110 W
150 W
MTBF (@ 25°C)
MIL-HDBK-217F
Bellcore
120 Vac @ 60 Hz
120 Vac @ 150 W
Input/output
Input/chassis
20 ms @ 150 W
73% typical
3000 Vac
1500 Vac
EN60950, VDE0805, IEC950
UL1950, CSA C22.2 No. 950
540 g (19 oz)
350,000 hours min.
800,000 hours min.
EN61000-4-5
EN61000-4-4
EN61000-4-3
EN61000-4-6
Level 3
Level 3
Level 3
Level 3
Temperature coefficient
Overvoltage protection
Short circuit protection
Minimum output current
INPUT SPECIFICATIONS
Input voltage range
Input frequency range
Input surge current
Safety ground
leakage current
Input current
Input fuse
EMC CHARACTERISTICS
(10)
Conducted emissions
Radiated emissions
Harmonic current
emission correction
ESD air
ESD contact
EN55022, FCC part 15
EN55022, FCC part 15
EN61000-3-2
EN61000-4-2
EN61000-4-2
Level B
Level A
Compliant
Level 3
Level 3
Relative humidity
Altitude
Vibration (See Note 6)
Shock
5% to 95% RH
10,000 feet max.
30,000 feet max.
2.4 G rms peak
516.4 Part IV
Embedded Power for
Business-Critical Continuity
Specifications Contd.
OUTPUT
VOLTAGE
5.1 V (V
A
)
+3.3 V (V
B
)
+12 V (V
C
)
12 V, iso (V
D
)
1
2
3
4
Rev.02.20.07
NLP150L Series
3 of 5
OUTPUT CURRENT
MIN
(5)
1.5 A
0.5 A
0A
0A
MAX
(1)
20 A
10 A
2A
0.65 A
300 LFM
(2)
30 A
15 A
3A
1A
RIPPLE
(4)
50 mV
50 mV
120 mV
120 mV
TOTAL
REGULATION
±2.0%
±2.0%
±5.0%
±5.0%
MODEL
NUMBERS
(12,13)
NLP150L-96Q5366Y
Notes
5
6
7
8
9
10
11
12
13
Free air convection.
Multiple output units: maximum continuous output power not to exceed 110
W and the output current not to exceed: I
A
+I
B
+2(I
C
+I
D
)≤23 A.
300 LFM forced air cooling from the longer side.
Multiple output units: maximum continuous output power not to exceed 150
W and the output current not to exceed: I
A
+I
B
+2(I
C
+I
D
)≤32 A.
Peak output current lasting less than 30 seconds with duty cycle less than 5%.
During peak loading, output voltage may exceed total regulation limits.
Figure is peak-to-peak for room temperature rating. Output noise
measurements are made across a 20 MHz bandwidth using a 6 inch twisted
pair, terminated with a 10 μF electrolytic capacitor and a 0.1 μF ceramic
capacitor.
Minimum load required for correct start-up and operation on single outputs
and on main output of multiple versions. Failure to observe minimum load on
main output will not allow the supply to start-up correctly. Some electronic test
loads have a large delay time before they start drawing current even though the
voltage from the supply is present. During this time delay, there is no load on
the output and as a result, the supply may not be able to start-up properly and
maintain its correct output voltage. In these instances, a dummy resistive load
across the output may be necessary to load the output of the supply until the
test load can function correctly and draw the intended minimum load.
Minimum load required on auxiliary outputs to maintain regulation.
Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms 5
Hz to 500 Hz.
For optimum reliability no part of the heatsink should exceed 110 °C and no
semi-conductor case temperature should exceed 120 °C.
CAUTION: Allow a minimum of 1 second after disconnecting line power when
making thermal measurements.
This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
Conducted EMI specifications reference measurements made with the power
supply mounted on a grounded metal sheet extending 1 inch beyond each
edge, using an unshielded cable. No external filtering required during
conducted emissions testing but some applications may require additional
filtering to achieve system compliance. Compliance with Radiated EMI
specifications may require mounting in a suitable enclosure.
All models require a minimum mounting stand-off of 6.35 mm (0.25 inches) in
the end use product.
The ‘Y’ suffix indicates that these parts are non Pb-free (RoHS 5/6) compliant.
RoHS 6/6 (Pb-free) compliant versions are also available by replacing the suffix
‘Y’ with the suffix ‘J’ e.g. NLP150L-96Q5366J.
NOTICE: Some models do not support all options. Please contact your local
Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
DERATING CURVE
Output Power (Watts)
150W
110W
300 LFM FORCED
AIR COOLING
NATURAL
CONVECTION
COOLING
75W
55W
0°C
10°C 20°C 30°C 40°C 50°C 60°C 70°C
Embedded Power for
Business-Critical Continuity
Rev.02.20.07
NLP150L Series
4 of 5
Mechanical Notes
A
All dimensions are in inches (mm).
1
7.800 (198.12)
7.350 (186.69)
3.755 (95.38)
J2
1
J3
4
1
0.225 (5.72)
4
3
3.800 (96.52)
3.350 (85.09)
2
Recommended direction for
forced air relative to power
supply orientation shown
below.
1
2
3
4
Best.
Good.
Not recommended.
Not recommended.
2.385 (60.58)
F1
2
1
J1
T1 (REF.)
J5
5
J6
1
2
0.000 (0.00)
Ø
0.156 (
Ø
3.96)
0.000 (0.00)
0.220 (5.59)
JCS
JRM3
JRM5
2
1
2
1
2
1
(5 PLS)
ALL DIMENSIONS IN INCHES (MM)
MAXIMUM COMPONENT HEIGHT 1.26 (32.00)
CONNECTOR
J1
J2
J3
J5
J6
JRM3, JRM5
& JCS
TYPE
CONNECTOR AND MATING CONNECTOR TYPES
MATING CONNECTOR TYPE
Molex 09-50-3031 or equivalent with Molex 08-50-0105 or equivalent crimp
terminals
Molex 22-01-AA-5261, AA22-01 or equivalent
Molex 09-50-3041 or equivalent with Molex 2478 phosphor bronze
or equivalent crimp terminals
70 5 05-C50
Molex 22-01-2021 and contact 08-50-0113 terminals or equivalent
Leoco 2420S02000 and contact 2453TPB00V1
Molex 26-60-4030 or equivalent
Male 0.250 quick disconnect
Molex 26-60-4040 or equivalent
Beau Interconnect 70505-C-50 or
equivalent
Molex 22-23-3021 or equivalent
Leoco 2421P02H000 or equivalent
J1 PIN CONNECTIONS
Pin 1
Neutral
Pin 2
Void
Pin 3
Line
J3 PIN CONNECTIONS
Pin 1
V
D
Positive
Pin 2
V
D
RTN
Pin 3
Pin 4
V
C
Positive
V
C
RTN
Note:
V
D is a floating output.
It can be configured as positibe or negative
J5 PIN CONNECTIONS
Pin 1
V
A
Positive
Pin 2
V
A
Positive
Pin 3
Pin 4
Pin 5
Main RTN
Main RTN
V
B
Positive
JRM5 PIN CONNECTIONS
Pin 1
V
A
Sense +
Pin 2
V
A
Sense -
JRM3 PIN CONNECTIONS
Pin 1
V
B
Sense +
Pin 2
V
B
Sense -
J6 PIN CONNECTIONS
Pin 1
Signal
Pin 2
RTN
JCS PIN CONNECTIONS
Pin 1
Load A Current Sharing
Pin 2
Load B Current Sharing
Embedded Power for
Business-Critical Continuity
Rev.02.20.07
NLP150L Series
5 of 5
Americas
5810 Van Allen Way
Carlsbad, CA 92008
USA
Telephone: +1 760 930 4600
Facsimile: +1 760 930 0698
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
Telephone: +44 (0) 1384 842 211
Facsimile: +44 (0) 1384 843 355
Asia (HK)
16th - 17th Floors, Lu Plaza
2 Wing Yip Street, Kwun Tong
Kowloon, Hong Kong
Telephone: +852 2176 3333
Facsimile: +852 2176 3888
For global contact, visit:
www.powerconversion.com
technicalsupport@powerconversion.com
While every precaution has been taken to ensure
accuracy and completeness in this literature, Emerson
Network Power assumes no responsibility, and disclaims
all liability for damages resulting from use of this
information or for any errors or omissions.
Emerson Network Power.
The global leader in enabling
business-critical continuity.
AC Power
Connectivity
DC Power
Embedded Power
Inbound Power
Integrated Cabinet Solutions
Outside Plant
Precision Cooling
Site Monitoring and Services
EmersonNetworkPower. com
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
©2007 Emerson Electric Co.
测试/测量
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
