Freescale Semiconductor
Data Sheet: Technical Data
Document Number MKE04P80M48SF0
Rev 3, 5/2014
Sub-Family Data Sheet
Supports the following:
MKE04Z64VLD4(R),
MKE04Z128VLD4(R),
MKE04Z64VQH4(R),
MKE04Z128VQH4(R),
MKE04Z64VLH4(R),
MKE04Z128VLH4(R),
MKE04Z64VLK4(R) and
MKE04Z128VLK4(R)
MKE04P80M48SF0
Key features
• Operating characteristics
– Voltage range: 2.7 to 5.5 V
– Flash write voltage range: 2.7 to 5.5 V
– Temperature range (ambient): -40 to 105°C
• Performance
– Up to 48 MHz ARM® Cortex-M0+ core
– Single cycle 32-bit x 32-bit multiplier
– Single cycle I/O access port
• Memories and memory interfaces
– Up to 128 KB flash
– Up to 16 KB RAM
• Clocks
– Oscillator (OSC) - supports 32.768 kHz crystal
or 4 MHz to 24 MHz crystal or ceramic
resonator; choice of low power or high gain
oscillators
– Internal clock source (ICS) - internal FLL with
internal or external reference, 37.5 kHz pre-
trimmed internal reference for 48 MHz system
clock
– Internal 1 kHz low-power oscillator (LPO)
• System peripherals
– Power management module (PMC) with three
power modes: Run, Wait, Stop
– Low-voltage detection (LVD) with reset or
interrupt, selectable trip points
– Watchdog with independent clock source
(WDOG)
– Programmable cyclic redundancy check module
(CRC)
– Serial wire debug interface (SWD)
– Aliased SRAM bitband region (BIT-BAND)
– Bit manipulation engine (BME)
• Security and integrity modules
– 80-bit unique identification (ID) number per chip
• Human-machine interface
– Up to 71 general-purpose input/output (GPIO)
– Two 32-bit keyboard interrupt modules (KBI)
– External interrupt (IRQ)
• Analog modules
– One up to 16-channel 12-bit SAR ADC,
operation in Stop mode, optional hardware
trigger (ADC)
– Two analog comparators containing a 6-bit
DAC and programmable reference input
(ACMP)
• Timers
– One 6-channel FlexTimer/PWM (FTM)
– Two 2-channel FlexTimer/PWM (FTM)
– One 2-channel periodic interrupt timer (PIT)
– One pulse width timer (PWT)
– One real-time clock (RTC)
Freescale reserves the right to change the detail specifications as may be
required to permit improvements in the design of its products.
© 2013–2014 Freescale Semiconductor, Inc.
• Communication interfaces
– Two SPI modules (SPI)
– Up to three UART modules (UART)
– Two I2C modules (I2C)
• Package options
– 80-pin LQFP
– 64-pin QFP/LQFP
– 44-pin LQFP
Sub-Family Data Sheet, Rev3, 5/2014.
2
Freescale Semiconductor, Inc.
Table of Contents
1 Ordering parts...........................................................................4
1.1 Determining valid orderable parts......................................4
2 Part identification......................................................................4
2.1 Description.........................................................................4
2.2 Format...............................................................................4
2.3 Fields.................................................................................4
2.4 Example............................................................................5
3 Parameter classification............................................................5
4 Ratings......................................................................................6
4.1 Thermal handling ratings...................................................6
4.2 Moisture handling ratings..................................................6
4.3 ESD handling ratings.........................................................6
4.4 Voltage and current operating ratings...............................7
5 General.....................................................................................7
5.1 Nonswitching electrical specifications...............................7
5.1.1
5.1.2
5.1.3
DC characteristics.................................................7
Supply current characteristics...............................14
EMC performance.................................................15
5.2.2
FTM module timing...............................................17
5.3 Thermal specifications.......................................................18
5.3.1
Thermal characteristics.........................................18
6 Peripheral operating requirements and behaviors....................20
6.1 Core modules....................................................................20
6.1.1
SWD electricals ....................................................20
6.2 External oscillator (OSC) and ICS characteristics.............21
6.3 NVM specifications............................................................23
6.4 Analog...............................................................................24
6.4.1
6.4.2
ADC characteristics...............................................24
Analog comparator (ACMP) electricals.................26
6.5 Communication interfaces.................................................27
6.5.1
SPI switching specifications..................................27
7 Dimensions...............................................................................30
7.1 Obtaining package dimensions.........................................30
8 Pinout........................................................................................31
8.1 Signal multiplexing and pin assignments...........................31
8.2 Device pin assignment......................................................33
9 Revision history.........................................................................36
5.2 Switching specifications.....................................................16
5.2.1
Control timing........................................................16
Sub-Family Data Sheet, Rev3, 5/2014.
Freescale Semiconductor, Inc.
3
Ordering parts
1 Ordering parts
1.1 Determining valid orderable parts
Valid orderable part numbers are provided on the web. To determine the orderable part
numbers for this device, go to
freescale.com
and perform a part number search for the
following device numbers: KE06Z.
2 Part identification
2.1 Description
Part numbers for the chip have fields that identify the specific part. You can use the
values of these fields to determine the specific part you have received.
2.2 Format
Part numbers for this device have the following format:
Q KE## A FFF R T PP CC N
2.3 Fields
This table lists the possible values for each field in the part number (not all combinations
are valid):
Field
Q
KE##
A
FFF
R
T
PP
Description
Qualification status
Kinetis family
Key attribute
Program flash memory size
Silicon revision
Temperature range (°C)
Package identifier
Values
• M = Fully qualified, general market flow
• P = Prequalification
• KE04
• Z = M0+ core
• 128 = 128 KB
• (Blank) = Main
• A = Revision after main
• V = –40 to 105
• LD = 44 LQFP (10 mm x 10 mm)
Table continues on the next page...
Sub-Family Data Sheet, Rev3, 5/2014.
4
Freescale Semiconductor, Inc.
Parameter classification
Field
Description
Values
• QH = 64 QFP (14 mm x 14 mm)
• LH = 64 LQFP (10 mm x 10 mm)
• LK = 80 LQFP (14 mm x 14 mm)
CC
N
Maximum CPU frequency (MHz)
Packaging type
• 4 = 48 MHz
• R = Tape and reel
• (Blank) = Trays
2.4 Example
This is an example part number:
MKE06Z128VLK4
3 Parameter classification
The electrical parameters shown in this supplement are guaranteed by various methods.
To give the customer a better understanding, the following classification is used and the
parameters are tagged accordingly in the tables where appropriate:
Table 1. Parameter classifications
P
C
T
D
Those parameters are guaranteed during production testing on each individual device.
Those parameters are achieved by the design characterization by measuring a statistically relevant sample size
across process variations.
Those parameters are achieved by design characterization on a small sample size from typical devices under
typical conditions unless otherwise noted. All values shown in the typical column are within this category.
Those parameters are derived mainly from simulations.
NOTE
The classification is shown in the column labeled “C” in the
parameter tables where appropriate.
Sub-Family Data Sheet, Rev3, 5/2014.
Freescale Semiconductor, Inc.
5
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
