Nichrome resistor element provides stable performance in various environments.
•
Multiple epoxy coating on vacuum-deposited metal film provides superior moisture protection.
Dimension:
Style
MF 12
MF 25
MF 50
Power Rating
at 70°C
(W)
0.125
0.25
0.5
D Maximum
1.85
2.5
3.5
L Maximum
3.5
6.8
10.0
d
+0.02
-0.05
0.45
0.54
H±3
28.0
Dimensions : Millimetres
Supplied bandoliered on tape (Box = 5000 pcs. for MF12 and MF25 Series)
(Box = 1000 pcs. for MF50 Series).
General Specification
Style
MF 12
MF 25
MF 50
Dielectric
withstanding
voltage (V)
400
500
700
Maximum
working
voltage (V)
200
250
350
Maximum
overload
voltage (V)
400
500
700
Dimensions : Millimetres
Resistance
Tolerance
Temperature
Coefficient
Resistance
Range
±1%
±50ppm/°C
1Ω to 1MΩ
Page 1
10/05/05 V1.0
MF12, MF25 & MF50 Series
Metal Film Resistors
Current Noise Level
Derating Curve
+0.8
Load Life
Percent rated load (%)
+0.4
∆R/R
(%)
0
-0.4
-0.8
100Ω
1KΩ
10KΩ
100KΩ
1MΩ
Nominal resistance (Ω)
Ambient temperature (°C)
Performance Specification
Characteristics
Test Methods
Natural resistance change per temperature degree centigrade.
R
2
- R
1
Temperature
coefficient
R
1
(
t2-t1
)
X 10 (ppm/°C)
6
Limits
Within the temperature coefficient specified
below
Maximum TCR
±50ppm/°C
No evidence of flashover mechanical
damage, arcing or insulation break down.
R
1
: Resistance value at room temperature (t
1
)
R
2
: Resistance value at room temperature plus 100°C (t
2
).
Dielectric
withstanding
voltage
Resistors shall be clamped in the trough of a 90° metallic
V-block and shall be tested at AC potential respectively
specified in the above list for 60 +10/-0 seconds.
Resistance change after continuous five cycles for duty cycle
specified
Step
Temperature
-55°C ±3°C
Room temperature
+155°C ±3°C
Room temperature
Time
30 minutes
10-15 minutes
30 minutes
10-15 minutes
1
2
3
4
Temperature
cycling
Resistance change rate is ±(1% +0.05Ω).
No evidence of mechanical damage.
Short-time
overload
Permanent resistance change after the application of a
potential of 2.5 times RCWV for 5 seconds.
Resistance change after 10,000 cycles (1 second "on", 25
seconds "off") at 4 times RCWV.
Resistance change rate is ±(0.5% +0.05Ω).
No evidence of mechanical damage.
Resistance change rate is ±(1% +0.05Ω).
No evidence of mechanical damage.
Pulse overload
Page 2
10/05/05 V1.0
MF12, MF25 & MF50 Series
Metal Film Resistors
Performance Specification
Characteristics
Test Methods
Resistance change after 1000 hours (1.5 hours "on", 0.5
Load life in humidity
hour "off") at RCWV in a humidity test chamber controlled at
40°C ±2°C and 90 to 95% relative humidity.
Permanent resistance change after 1000 hours operating at
Load life
RCWV with duty cycle of 1.5 hours "on" 0.5 hours "off" at
70°C ±2°C ambient.
Direct Load:
Resistance to a 2.5kgs direct load for 10
seconds in the direction of the longitudinal axis of the
terminal leads.
Terminal strength
Twist test:
Terminal leads shall be bent through 90° at a
point of about 6mm from the body of the resistor and shall
be rotated through 360° about the original axis of the bent
terminal in alternating direction for a total of 3 rotations.
Resistance to
soldering heat
Permanent resistance change when leads immersed to
3.2 - 4.8mm from the body in 350°C ±10°C solder for
3 ±0.5 seconds.
The area covered with a new, smooth, clean, shiny and
Solderability
continuous surface free from concentrated pinholes.
Test temperature of solder
Dwell time in solder
Resistance to
solvent
: 235°C ±5°C.
: 3+0.5/-0 seconds.
No deterioration of protective coating and
markings.
95% coverage Minimum.
Resistance change rate is ±(1% +0.05Ω).
No evidence of mechanical damage.
No evidence of mechanical damage.
Limits
Resistance Value
Normal type
Resistance Value
Normal type
∆
R/R
±1.5%
∆
R/R
±1.5%
Specimens shall be immersed in a bath of trichroethane
completely for 3 minutes with ultrasonic.
RCWV = Rated Continuous Working Voltage =
√
Rated Power X Resistance Value
Page 3
10/05/05 V1.0
MF12, MF25 & MF50 Series
Metal Film Resistors
Part Number Explanation:
MF
12
1R5
Type
Wattage Rating
OHMIC Values
Wattage Rating
: 12 = 0.125W, 25 = 0.25W and 50 = 0.5W.
OHMIC Values
: Where R = Ohms =
Ω
K = Kilo ohms = KΩ.
M = Mega ohms = MΩ.
and replaces the decimal point.
eg : 1R5 = 1.5Ω.
4K5 = 4.5KΩ.
6M8 = 6.8MΩ.
Stocked Values
Tolerance
1%
1%
1%
Wattage
0.125W
0.25W
0.5W
Range Value
1R - 1M
1R - 1M
1R - 1M
Page 4
10/05/05 V1.0
MF12, MF25 & MF50 Series
Metal Film Resistors
Notes:
International Sales Offices:
AUSTRALIA
– Farnell InOne
Tel No:
++ 61 2 9645 8888
Fax No: ++ 61 2 9644 7898
FINLAND
– Farnell InOne
Tel No:
++ 358 9 560 7780
Fax No: ++ 358 9 345 5411
NETHERLANDS
– Farnell InOne
Tel No:
++ 31 30 241 7373
Fax No: ++ 31 30 241 7333
SWITZERLAND
– Farnell InOne
Tel No: ++ 41 1 204 64 64
Fax No: ++ 41 1 204 64 54
AUSTRIA
– Farnell InOne
Tel No:
++ 43 662 2180 680
Fax No: ++ 43 662 2180 670
FRANCE
– Farnell InOne
Tel No:
++ 33 474 68 99 99
Fax No: ++ 33 474 68 99 90
NEW ZEALAND
– Farnell InOne
Tel No:
++ 64 9 357 0646
Fax No: ++ 64 9 357 0656
UK
– Farnell InOne
Tel No:
++ 44 8701 200 200
Fax No: ++ 44 8701 200 201
BELGIUM
– Farnell InOne
Tel No:
++ 32 3 475 2810
Fax No: ++ 32 3 227 3648
GERMANY
– Farnell InOne
Tel No:
++ 49 89 61 39 39 39
Fax No: ++ 49 89 613 59 01
NORWAY
– Farnell InOne
Tel No:
++ 45 44 53 66 66
Fax No: ++ 45 44 53 66 02
UK
–
BuckHickman InOne
++ 44 8450 510 150
++ 44 8450 510 130
BRAZIL
– Farnell-Newark InOne
Tel No:
++ 55 11 4066 9400
Fax No: ++ 55 11 4066 9410
HONG KONG
–
Farnell-Newark InOne
Tel No: ++ 852 2268 9888
Fax No: ++ 852 2268 9899
PORTUGAL
– Farnell InOne
Tel No:
++ 34 93 475 8804
Fax No: ++ 34 93 474 5288
UK
–
CPC
++ 44 8701 202 530
++ 44 8701 202 531
CHINA
– Farnell-Newark InOne
Tel No:
++86 10 6238 5152
Fax No: ++86 10 6238 5022
IRELAND
– Farnell InOne
Tel No:
++ 353 1 830 9277
Fax No: ++ 353 1 830 9016
SINGAPORE
–
Farnell-Newark InOne
Tel No: ++ 65 6788 0200
export
EXPORT
– Farnell InOne
Tel No:
++ 44 8701 200 208
Fax No: ++ 44 8701 200 209
Fax No: ++ 65 6788 0300
For enquiries from all other markets
DENMARK
– Farnell InOne
Tel No:
++ 45 44 53 66 44
Fax No: ++ 45 44 53 66 06
ITALY
– Farnell InOne
Tel No:
++ 39 02 93 995 200
Fax No: ++ 39 02 93 995 300
SPAIN
– Farnell InOne
Tel No:
++ 34 93 475 8805
Fax No: ++ 34 93 474 5107
http://www.farnellinone.com
ESTONIA
– Farnell InOne
Tel No:
++ 358 9 560 7780
Fax No: ++ 358 9 345 5411
MALAYSIA
–
Farnell-Newark InOne
Tel No: ++ 60 3 7873 8000
Fax No: ++ 60 3 7873 7000
SWEDEN
– Farnell InOne
Tel No:
++ 46 8 730 50 00
Fax No: ++ 46 8 83 52 62
http://www.buckhickmaninone.com
http://www.cpc.co.uk
Disclaimer
This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
无线连接
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
