PL-700SM-B SERIES
Metal Shell Auto-Coupling Connectors
27 pole
capacity circular shell connectors
Compact and configurable, the PL-700
Series connector is Alden’s most versa-
tile offering in a sub .700” diameter pack-
age. PL-700 Series connectors attach to
a cable with a Press & Seal ™ backshell
that provides the refined look and
perfomance of an overmolded product.
Packaging (intuitive, compact, configu-
rable)
• Pulse-Lok® auto-latch / mating
confirmation
• Up to 27 contact positions
PL-700SM-B FEATURES
• 14 standard color combinations
• Available as an overmolded
cable assembly
• Custom configurations available
Performance (for harsh
environments)
• Press & Seal™ self-sealing
contacts & backshell
• Water Proof
• Sterilizable
• Chemical resistant housing
• High mating cycle capability
• Rugged metal shell
Electrical (See Table A)
Mating Life: 5,000 cycles min.
Contact Resistance: < 10 milliohms*
Material
Connector Housing: Nickel Plated Brass
Flex Reliefs: Thermoplastic Rubber
Contacts: Pins = Brass, Sockets = Bronze Alloy
Gold Plate per MIL-G-45204C
30 - 45µ” Gold over 50 – 200µ” Nickel strike
SPECIFICATIONS
Mechanical
Mating Cycles: 20K cycles max
Retention Force (axial):
• Mated Connectors: 75 lbs. Minimum
• Cable to Connector: to 50 lbs. typical
• Backshell to Connector: 50 lbs.
Minimum
Housing Styles (illustrated on page 2)
• Plug – in-line, cable-mount
• Receptacle – front panel-mount
• Receptacle – in-line, cable-mount
Environmental
• Operating Temp: -20C to +125C**
• Moisture Resistance: to IP-67
• Sterilizable: steam, gamma & EtO
• Chem. Resistance: common OR
cleaning solvents
* post conditioning
** dependent on backshell material
TABLE A:
STANDARD CONTACT CONFIGURATIONS & SPECIFICATIONS
Operating Voltage
Operating Current
Contact Resistance
Up to 27
contact positions
Number of Poles
Contact Size
Pin
f
(mm)
Max Wire Gauge
27
24
18
14
0.5
0.5
0.5
0.7
0.7
0.7
0.7
0.7
0.7
0.7
2/1.5 + 2/.7
0.7
0.7
1.5
0.7
2.3
28
28
28
22
22
22
22
22
22
22
16 / 22
22
22
16
22
12
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
300 V RMS
0.5 A
0.5 A
0.9 A
0.9 A
1.2 A
2.0 A
2.1 A
2.1 A
2.4 A
2.4 A
7.0 A / 3.0 A
3.0 A
3.0 A
13.0 A
3.0 A
15.0 A
< 14m ohms
< 14m ohms
< 14m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 6m ohms
< 2m ohms
< 6m ohms
< 2m ohms
Standard hybrid
circuit arrangements
12
10
7
6
5
Coaxial & custom
circuits available
4
4
3
2
2
1
1
For additional information about this, or any other Alden product, please
contact an Amphenol Alden specialist today.
© 2012 Amphenol Alden
Phone: 508-427-7000
Fax: 508-583-0164
www.amphenolalden.com
“Pulse-Lok” is a trademark of Amphenol Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.
1
PL-700SM-B SERIES
Metal Shell Auto-Coupling Connectors
IN-LINE RECEPTACLES
Cable-Mount Receptacle Kit
27 Pole Capacity
circular shell connectors
STANDARD HOUSING OPTIONS
PANEL MOUNT RECEPTACLES
Front Panel-Mount Receptacle
Mounted Height =
.32
.72
f
.72
f
.70
f
IN-LINE PLUGS
Cable-Mount Plug Kit
1.54
Select this component from Table B
.90
Select this component from Table B
Panel Thickness Range to .187”
.88
Select this component from Table B
Cable-Mount Receptacle Kit with
optional Press & Seal™ Backshell
Front Panel-Mount
Receptacle Dust Cover
Cable-Mount Plug with Press & Seal™
Backshell Accessory
.70
f
2.20
Select Press & Seal™ Backshell
from Table C
Dust cover is optional.
Component # 103677
1.60
Select Press & Seal™ Backshell from Table C
Cable-Mount Receptacle with
optional overmolded strain relief
Plug with Relief Tabs and Optional
Overmolded Strain Relief
.70
f
2.80
Refer to PL Series Overmolding Guide
Refer to PL Series Overmolding Guide
2.25
All dimensions in inches (except where noted)
Number of
Poles
In-Line Receptacle
TABLE B:
Panel Mount Receptacle
STANDARD PART NUMBERS
In-Line Plug Standard
In-Line Plug with
Release Tabs
27
24
18
14
12
10
7
6
5
4
2+2
3
2 x .7mm
2 x 1.5mm
1 x .7mm
1 x 2.3mm
Note: Part numbers cover black housings in Key 1 configuration. For options utilize the Alden connector configurator located @
www.amphenolalden.com/connectors-cable-assemblies/configure-connector
Solder Cup
357062
357131
357125
357048
357119
357113
357104
357107
357101
357095
357020
357059
357080
357083
357071
357006
Solder Cup
356062
356131
356125
356048
356119
356113
356028
356072
356071
356095
356020
356089
356080
356077
356101
356006
PCB
356149
356209
356203
356143
356197
356191
356137
356185
356179
356173
-
356167
356161
-
356155
-
Solder Cup
355062
355131
355125
355048
355119
355113
355028
355072
355071
355095
355020
355089
355080
355077
355101
355006
Solder Cup
353062
353131
353125
353048
353119
353113
353028
353072
353071
353095
353020
353089
353080
353077
353101
353006
Options Include:
IndicatorColor Options
Mating Key Options
Black, Blue, Red standard
2 Standard Keys, Proprietary Keys Available
*Press & Seal(tm) contacts, crimp
or solder termination
Phone: 508-427-7000
Fax: 508-583-0164
www.amphenolalden.com
For additional information about this, or any other Alden product, please
contact an Amphenol Alden specialist today.
© 2012 Amphenol Alden
“Pulse-Lok” is a trademark of Amphenol Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.
2
PL-700SM-B SERIES
Metal Shell Auto-Coupling Connectors
27 Pole Capacity Circular Shell
CONNECTOR TERMINATION OPTIONS
Contact Termination
“Press & Seal” Contact System
All Connectors
“Press & Seal” Features &
Benefits
• Contacts provide IP-67 water-
tight seal when inserted into insu-
lator
• Easy
crimp & poke
installation
• Excellent contact retention
• Contacts may be crimped or
soldered
Panel 1
Fixed Solder Cup
Tiered solder cups
provide easy access
to center positions.
Canted cups facilitate
quick and easy wire
positioning. Standard
on 10 to 27-pole
configurations
Available on 1 to 7-pole configurations
Accepts wire gauges up to 12 AWG (1 pole),
16 AWG (2 poles), 22 AWG (7 poles)
PCB Termination
PCB Mounting Template - 27 Pole
f
.162 B.C.
9 holes
Panel-Mount Receptacles
PCB Mounting Template - 14 Pole
f
.102 B.C.
4 holes
Panel 2
• Available in most pole counts
from 1 to 27 poles
• PCB stand-offs ensure proper
positioning
• Convenient packaging -- high-
temperature contect cures may
be soldered to PCB and
snapped into panel-mounted
receptacle housing later
Features & Benefits
f
.268 B.C.
15 holes
f
.244 B.C.
10 holes
Hole dia.
.034 +/- .01
f
.062 B.C.
3 holes
f
.580 B.C.
Request Sales Drawing SD-106487
33 holes
Request Sales Drawing SD-106486
Panel-Mount Cut-Out Templates
f
.625
f .70
Mounting Flange
Footprint (f.75 for
RPM spanner nut)
In-Line Plug & Receptacle Backshell Table C
A
(wire exit i.d.)
1.10
.560
Applies to both front & rear panel-mount receptacles
In-Line Backshell -
The PL-700 plug housing is designed to accept Alden’s one piece, Press &
Seal PVC Backshell. This unique backshell simply snaps into place providing
an IP-67 rated seal to the plug housing and cable exit without hardware result-
ing in a clean overmolded look. For optimum sealing we suggest selecting a
wire exit i.d. that is at least .005” smaller than your nominal cable diameter.
Dimension A
0.053
0.064
0.075
0.086
0.096
0.104
0.120
0.129
0.142
0.153
0.162
0.170
0.186
0.204
0.215
0.225
0.235
0.249
0.264
0.300
Part #
Black
300350
300352
300354
300356
300358
300360
300362
300364
300366
300368
300370
300372
300374
300376
300378
300380
300382
300384
300386
300388
Part #
Gray
300351
300353
300355
300357
300359
300361
300363
300365
300367
300369
300371
300373
300375
300377
300379
300381
300383
300385
300387
300389
Accessory Description
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
All measurements in inches
Standard color is black.
Gray is optional.
Accessories
Plug Soaking Cap
Alden P/N 300391
Standard color is black. Gray optional.
Assembly Instructions
Panel-Mount
Panel-Mount
In-Line Plug
In-Line Plug
Receptacle (1 to 7 pole) = AI-PL30A
Receptacle (10 to 27 pole) = AI-PL30B
(1 to 7 pole) = AI-PL31A
(10 to 27 pole) = AI-PL31B
For additional information about this, or any other Alden product, please
contact an Amphenol Alden specialist today.
Phone: 508-427-7000
Fax: 508-583-0164
www.amphenolalden.com
© 2012 Amphenol Alden “Pulse-Lok” is a trademark of Amphenol Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.
3
PL-700SM-B SERIES
Metal Shell Auto-Coupling Connectors
27 Pole Capacity Circular Shell
PL-700 SERIES PLUG & RECEPTACLE ASSEMBLY TOOLS
Field or Bench Assembly Tools
Contact Insertion Hand Tools (for 1 to 7 poles)
- Insertion Hand Tool # 12 Contact
- Insertion Hand Tool # 16 Contact
- Insertion Hand Tool # 22 Contact
- In-Line Plug, Key Pattern #1
- In-Line Plug, Key Pattern #2
- Receptacle
Part Number
390020
390021
390022
390025
390026
390027
390010
390002
390003
390004
390042
390043
390044
390045-88
390040
390041
390035
390032
390031
390030
Insulator Loading Nests for Hand Tools
(Order the required nest(s) from the following selections)
Receptacle
Connector Kit Hand Assembly Tools
- Hand Vice Grip with Fixture Adapter
1
2
Back Shell Sizing Tools
- Back Shell Fixture (.050 to .190” Cable Diameter
- Panel Mount Receptacle Insulator Fixture & Back
Shell Fixture (.200” to >300” Cable Diameter)
- In-Line Plug Insulator Fixture & In-line Receptacle
Adapter Fixture
(Order the required nest(s) from the following selections)
1 Receptacle Housing
2 Receptacle Insulator
In-Line Plug
Spanner Wrench
-
-
-
-
-
-
- Tool for Cable Diameter of .050” to .120”
- Tool for Cable Diameter of .120” to .190”
- Tool for Cable Diameter of .200” to .300”
1
2
Contact Termination Tools
- Tightens RPM Receptacle’s Mounting Ring
Pneumatic Crimper
Stand for Pneumatic Crimper
Hand Crimper
Size - #12 Crimp Die
Size - #16 Crimp Die
Size - #22 Crimp Die
1 Plug Insulator
2 Plug Housing Assembly
Production arbor press & fixturing is available upon request.
For additional information about this, or any other Alden product, please
contact an Amphenol Alden specialist today.
© 2012 Amphenol Alden Products Company
Phone: 508-427-7000
Fax: 508-583-0164
www.amphenolalden.com
“Pulse-Lok” is a trademark of Amphenol Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.
4
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
