https://www.phoenixcontact.com/us/products/2902833
Frequency transducer - MINI MCR-SL-F-UI-SP-NC - 2902833
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
The configurable frequency transducer is suitable for the connection of NAMUR proximity sensors as well as for
sensors with NPN and PNP outputs. Configurable via DIP switch and teach-in wheel. Spring-cage connection,
standard configuration.
The figure shows a version with a
screw connection
Product description
The configurable 3-way isolated frequency transducer is suitable for the connection of NAMUR proximity sensors (IEC 60947-5-6 and EN 50227) as well
as for sensors with NPN and PNP outputs that generate a frequency signal.
The measured values are converted into a linear current or voltage signal.
The device is configured via DIP switches. Alternatively, the frequency range can be configured with extended options via the teach-in wheel. The
measuring transducer supports fault monitoring.
Key commercial data
Packing unit
GTIN
Custom tariff number
Country of origin
85437090
GERMANY
1 PCE
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
Height
Depth
6.2 mm
93.1 mm
102.5 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 65 °C
29.08.2013 Page 1 / 7
https://www.phoenixcontact.com/us/products/2902833
Frequency transducer - MINI MCR-SL-F-UI-SP-NC - 2902833
Technical data
Ambient conditions
Ambient temperature (storage/transport)
Degree of protection
-40 °C ... 85 °C
IP20
Input data
Frequency input
Configurable/programmable
Frequency measuring range
Available input sources
Frequency input
Yes
0.002 Hz ... 20 kHz (DIP switch)
NPN/PNP transistor outputs
NAMUR initiators
Floating relay contact (dry contact)
Max. input amplitude
A/D conversion time
30 V (incl. DC voltage)
10 ms (At f > 500 Hz)
Output data
Output name
Configurable/programmable
Voltage output signal
Voltage output
Yes
0 V ... 5 V
1 V ... 5 V
0 V ... 10 V
10 V ... 0 V
Current output signal
0 mA ... 20 mA
4 mA ... 20 mA
20 mA ... 0 mA
20 mA ... 4 mA
Max. output voltage
Max. output current
Load/output load voltage output
Load/output load current output
approx. 12.3 V
24.6 mA
≥ 10 kΩ
500 Ω (at 20 mA)
Power supply
Supply voltage range
Typical current consumption
Power consumption
9.6 V DC ... 30 V DC (The T connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN,
Order No. 2869728) can be used to bridge the supply voltage. It can be
snapped onto a 35 mm DIN rail according to EN 60715))
< 28 mA (at I
OUT
= 20 mA, 24 V DC, load 500 Ω)
< 800 mW (at I
OUT
= 20 mA, 9.6 V DC, load 500 Ω)
Connection data
Connection method
Conductor cross section solid min.
Conductor cross section solid max.
Spring-cage conn.
0.2 mm²
2.5 mm²
29.08.2013 Page 2 / 7
https://www.phoenixcontact.com/us/products/2902833
Frequency transducer - MINI MCR-SL-F-UI-SP-NC - 2902833
Technical data
Connection data
Conductor cross section stranded min.
Conductor cross section stranded max.
Conductor cross section AWG/kcmil min.
Conductor cross section AWG/kcmil max
Stripping length
0.2 mm²
2.5 mm²
24
12
8 mm
General
Maximum temperature coefficient
Status display
Operating elements
Protective circuit
Electrical isolation
Surge voltage category
Pollution degree
Rated insulation voltage
Test voltage, input/output/supply
Electromagnetic compatibility
Noise emission
Noise immunity
Color
Housing material
Mounting position
Assembly instructions
Conformance
ATEX
UL, USA / Canada
GL
0.01 %/K
LED red
Press/slide button
Transient protection
Basic insulation according to EN 61010
II
2
50 V AC/DC
1.5 kV (50 Hz, 1 min.)
Conformance with EMC Directive 2004/108/EC
EN 61000-6-4
EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
green
PBT
Any
The T connector can be used to bridge the supply voltage. It can be
snapped onto a 35 mm DIN rail according to EN 60715.
CE-compliant
II 3 G Ex nA IIC T4 Gc X
508 listed
Class I, Div. 2, Groups A, B, C, D T5 applied for
GL applied for
EMC data
Name
Standards/regulations
Typical deviation from the measuring range final value
Name
Standards/regulations
Typical deviation from the measuring range final value
Name
Electromagnetic RF field
EN 61000-4-3
0.1 %
Fast transients (burst)
EN 61000-4-4
2%
Conducted interferences
29.08.2013 Page 3 / 7
https://www.phoenixcontact.com/us/products/2902833
Frequency transducer - MINI MCR-SL-F-UI-SP-NC - 2902833
Technical data
EMC data
Standards/regulations
Typical deviation from the measuring range final value
EN 61000-4-6
0.3 %
Classifications
ETIM
ETIM 3.0
ETIM 4.0
ETIM 5.0
EC001446
EC001485
EC001485
UNSPSC
UNSPSC 11
UNSPSC 12.01
UNSPSC 13.2
UNSPSC 6.01
UNSPSC 7.0901
39121008
39121008
39121008
30211506
39121008
eCl@ss
eCl@ss 4.0
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0
eCl@ss 7.0
eCl@ss 8.0
27200206
27200206
27200206
27200206
27200206
27200206
27200206
Approvals
Approvals
Approvals
UL Listed / cUL Listed / cULus Listed
Ex Approvals
Approvals submitted
29.08.2013 Page 4 / 7
https://www.phoenixcontact.com/us/products/2902833
Frequency transducer - MINI MCR-SL-F-UI-SP-NC - 2902833
Approvals
Approval details
UL Listed
cUL Listed
cULus Listed
Accessories
Accessories
Power terminal block - MINI MCR-SL-PTB-FM - 2902958
The MINI MCR-SL-PTB-FM(-SP) power terminal block is used to supply the supply voltage to the T-connector. The FM
power terminal block offers the additional function of monitoring in combination with the fault monitoring module. Screw
connection.
Power terminal block - MINI MCR-SL-PTB-FM-SP - 2902959
The MINI MCR-SL-PTB-FM(-SP) power terminal block is used to supply the supply voltage to the T-connector. The FM
power terminal block offers the additional function of monitoring in combination with the fault monitoring module. Spring-
cage connection.
Monitoring module - MINI MCR-SL-FM-RC-NC - 2902961
The fault monitoring module is used to evaluate and report group errors from the fault monitoring system and to monitor
the supply voltages. The error is reported via an N/O contact. Screw connection, standard configuration.
29.08.2013 Page 5 / 7
PCB设计
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
