Datasheet> 器件分类 > 无源元件> 电阻器> 97A2D-H24-A30/R54

文档预览

97A2D-H24-A30/R54: 产品描述Potentiometer, Cermet, 2W, 15000ohm, 10% +/-Tol, -150,150ppm/Cel, 6398,; 产品类别无源元件电阻器; 文件大小340KB，共7页; 制造商Bourns; 官网地址http://www.bourns.com

下载文档详细参数全文预览

97A2D-H24-A30/R54概述

Potentiometer, Cermet, 2W, 15000ohm, 10% +/-Tol, -150,150ppm/Cel, 6398,

97A2D-H24-A30/R54规格参数

参数名称	属性值
是否Rohs认证	不符合
Objectid	772521784
Reach Compliance Code	unknown
构造	Rotary
引线长度	12.7 mm
最高工作温度	125 °C
最低工作温度	-40 °C
封装高度	18.42 mm
封装长度	15.88 mm
封装形式	PCB Mount
封装宽度	24.77 mm
额定功率耗散 (P)	2 W
电阻	15000 Ω
电阻器类型	POTENTIOMETER
旋转角	240 deg
系列	97
尺寸代码	6398
技术	CERMET
温度系数	150 ppm/°C
容差	10%

97A2D-H24-A30/R54文档预览

VE S C O

AV R M

AI SIO PL

LA N IA

BL S NT

Features

■

Virtually inﬁnite electrical circuit isolation

■

Metal or plastic shaft options

■

DPST and DPDT switch options

■

RoHS compliant versions available*

Model 97 & 99

5/8 ” Square Single-Turn Panel Control with Rotary Switch

Potentiometer Speciﬁcations

Initial Electrical Characteristics

Conductive Plastic Element

Cermet Element

Standard Resistance Range

Linear Tapers (A, B, E, & H) .........................(B & E) 1 K ohms to 1 megohm ......................... (A & H) 100 ohms to 1 megohm

Audio Tapers (C, D, F, G, S, & T) .................(D,G,S, & T) 1 K ohms to 1 megohm ................. (C & F) 1 K ohms to 1 megohm

Total Resistance Tolerance ...............................10 % or 20 % .................................................... 5% or 10%

Independent Linearity .......................................±5 % .................................................................. ±5 %

Absolute Minimum Resistance .........................2 ohms maximum .............................................. 2 ohms maximum

Effective Electrical Angle ..................................(Linear tapers) 240 ° ± 5 °.................................. (Linear tapers) 240 ° ± 6 °

(Audio tapers) 225 ° ± 5 ° .................................. (Audio tapers) 225 ° ± 6 °

Contact Resistance Variation ...........................±1 % .................................................................. ±1 % or 3 ohms (whichever is greater)

Dielectric Withstanding Voltage (MIL-STD-202, Method 301)

Sea Level ....................................................1,500 VAC minimum .......................................... 1,500 VAC minimum

70,000 Feet .................................................500 VAC minimum ............................................. 500 VAC minimum

Insulation Resistance (500 VDC) ......................1,000 megohms minimum ................................. 1,000 megohms minimum

Power Rating (Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less)

+70 °C Single Section Assembly ................(Linear tapers) 0.5 watt ...................................... (Linear tapers) 2 watts

(Audio tapers) 0.25 watt .................................... (Audio tapers) 1 watt

+70 °C Multiple Section Assembly .............(Linear tapers) 0.5 watt/section ......................... (Linear tapers) 1 watt/section

(Audio tapers) 0.25 watt/section ....................... (Audio tapers) 0.5 watt/section

+125 °C .......................................................0 watt................................................................. 0 watt

Theoretical Resolution ......................................Essentially inﬁnite .............................................. Essentially inﬁnite

Environmental Characteristics

Operating Temperature Range .......................... -40 °C to +125 °C ................................................-40 °C to +125 °C

Storage Temperature Range.............................. -55 °C to +125 °C ................................................-55 °C to +125 °C

Temperature Coefﬁcient Over Storage

Temperature Range.......................................... ±1,000 ppm/°C.....................................................±150 ppm/°C

Vibration (Single Section) ................................... 15 G ......................................................................15 G

Total Resistance Shift ................................... ±2 % maximum....................................................±2 % maximum

Voltage Ratio Shift ........................................ ±5 % maximum....................................................±5 % maximum

Shock (Single Section) ....................................... 30 G ......................................................................30 G

Total Resistance Shift ................................... ±2 % maximum....................................................±2 % maximum

Voltage Ratio Shift ........................................ ±5 % maximum....................................................±5 % maximum

Load Life ............................................................ 1,000 hours ..........................................................1,000 hours

Total Resistance Shift ................................... ±10 % maximum..................................................±5 % maximum

Rotational Life (No Load) ................................... 100,000 cycles .....................................................100,000 cycles

Total Resistance Shift ................................... (Linear tapers) 10 ohms or ±15 % TRS max. ......(All tapers) ±5 % TRS max.

(whichever is greater)

(Audio tapers) ±20 % maximum

Contact Resistance Variation

@ 50,000 cycles ........................................... (Linear tapers) ±2 %.............................................±2 %

(Audio tapers) ±3 % .............................................±3 %

Moisture Resistance (MIL-STD-202, Method 103, Condition B)

Total Resistance Shift ................................... (Linear tapers) ±10 % TRS maximum .................(All tapers) ±5 % TRS maximum

(Audio tapers) ±20 % TRS maximum

Insulation Resistance (500 VDC) .................. 100 megohms minimum ......................................100 megohms minimum

IP Rating............................................................. IP 40 .....................................................................IP 40

*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications.

Model 97 & 99

5/8 ” Square Single-Turn Panel Control with Rotary Switch

Potentiometer Speciﬁcations

Mechanical Characteristics

Stop Strength (1/4 ” D shaft) .............................................................................................................................................45.19 N-cm (4 lb.-in.)

(1/8 ” D shaft) .............................................................................................................................................33.89 N-cm (3 lb.-in.)

Mechanical Angle.................................................................................................................................................................................300 ° ±5 °

Torque

Starting ........................................................................................................................................... 0.3 max. above average running torque

Running Torque

Single or Dual Section (A & R Bushings) .................................................................................................. 0.21 to 1.06 N-cm (0.3 to 1.5 oz.-in.)

Single or Dual Section (C & U Bushings) .................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)

Mounting .............................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum

Variation ...................................................................................................................... 0.35 N-cm (0.5 oz.-in.) maximum in 45 ° shaft travel

Weight (Single Section, Metal Bushing)...............................................................................................................................12.7 grams nominal

(Each Additional Section) ....................................................................................................................................................4 grams nominal

Terminals .................................................................................................................................Printed circuit terminals, J-Hooks or solder lugs

Soldering Condition ...........................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.

Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean ﬂux.

Marking ..................................................................................Manufacturer’s trademark, date code, resistance, manufacturer’s part number

Ganging (Multiple Section Potentiometers).............................................................................................................................2 cups maximum

Hardware ...................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.

NOTE:

Performance speciﬁcations do not apply to units subjected to printed circuit board cleaning procedures.

room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications.

Model 97 & 99

5/8 ” Square Single-Turn Panel Control with Rotary Switch

Rotary Switch Speciﬁcations

Initial Electrical Characteristics

Contacts:

DPST ........................................................................................................................................................N.O/N.O., N.C./N.C. or N.O./N.C.

DPDT ..........................................................................................................................................................2 N.O./N.C. (break before make)

Power Rating (Resistive Load):

DPST ..................................................................................... 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz

DPDT .....................................................................................................................................1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC

Contact Resistance (0.1 VDC-10 mA) ...............................................................................................................................10 milliohms nominal

Contact Bounce ...........................................................................................................................................................5 milliseconds maximum

Dielectric Withstanding Voltage (MIL-STD-202, Method 301)

Sea Level ........................................................................................................................................................................1500 VAC minimum

Insulation Resistance ................................................................................................................................................. 1000 megohms minimum

Environmental Characteristics

Operating Temperature Range .................................................................................................................................................... 0 °C to +70 °C

Exposure Temperature Range ................................................................................................................................................-65 °C to +125 °C

Vibration (Dual Section).................................................................................................................................................................................. 8 G

Contact Resistance .................................................................................................................................................. 10 milliohms maximum

Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum

Shock (Dual Section).................................................................................................................................................................................... 20 G

Contact Resistance .................................................................................................................................................. 10 milliohms maximum

Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum

Rotational Life ................................................................................................................................................................................25,000 cycles

Switch Actuating Torque (50% Duty cycle @ Rated Power Load) ........................................................... 1.41 to 4.94 N-cm (2 to 7 oz.-in.)

Contact Resistance ................................................................................................................................................ 100 milliohms maximum

Moisture Resistance (MIL-STD-202, Method 106, Condition B)

Contact Resistance (0.1 VDC-10 mA) ..................................................................................................................... 10 milliohms maximum

Insulation Resistance (After 24 Hours @ Room Temperature) (500 VDC) ..............................................................100 megohms minimum

Housing Material .......................................................................................................High temperature, ﬂame retardant, thermosetting plastic

Mechanical Characteristics

Actuating Torque (Each Section, Switch Module Only).............................................................................. 3.53 to 10.59 N-cm (5 to 15 oz.-in.)

Running Torque (Out of Detent, 2-4 Module Assembly) ............................................................................. 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)

Detent ................................................................................................................................................................................CW or CCW standard

Actuation Angle ......................................................................................................................................................................................20 ° ±5 °

Contact Materials.................................................................................................................................................... Fine silver with gold overlay

Terminal Styles .............................................................................................................................................................................Solder lug only

Standard Orientation ........................................................................................................................................ In-line with control terminals

Optional ....................................................................................................................................................Rotated 90 ° CCW from standard

Terminal Strength (Before and After Soldering Heat Exposure) .................................................................................... 0.9 kg (2 lbs.) minimum

NOTE:

Performance speciﬁcations do not apply to units subjected to printed circuit board cleaning procedures.

room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications.

Model 97 & 99

5/8 ” Square Single-Turn Panel Control with Rotary Switch

Product Dimensions

Model 97 PC Pin Terminals, “L” Pattern

MOUNTING

SURFACE

12.70 ± .229

(.500 ± .009)

0.79 ± .025

(.031 ± .010)

DIA.

13.72 ± 0.38

(.540 ± .015)

1.37 ± 0.08

(.054 ± .003)

2.36 ± 0.08

(.093 ± .003)

15.88

(.625)

7.92

(.312)

SEE

HOW TO ORDER

CHART FOR

BUSHING OPTIONS.

DIA.

0.81

TYP.

(.032)

5.08 ± 0.38

(.200 ± .015)

11.05 ± 0.20

(.435 ± .008)

1.19

(.047)

“A” STYLE

A.R. LUG

9.53

(.375)

12.7 ± 1.02

(.500 ± .040)

2.54

(.100)

2.54

(.100)

0.76 ± 0.05

(.030 ± .002)

TYP.

SEE

FOR SHAFT

OPTIONS.

Model 99 Solder Lug Terminals, "Triangular" Pattern

5.08 ± 1.02

(.200 ± .040)

5.59 ± .20

(.220 ± .008)

4.45 ± .38

(.175 ± .015)

2.54

(.100)

2.54

(.100)

2.03

(.080)

3 PLCS.

.41

(.016)

2.29

1.02

(.040) WIDE X (.090) LONG

3 PLCS.

.381

TOLERANCES EXCEPT AS SHOWN: DECIMAL .XXX ± (.015 )FRACTION ± 1/64

9.65

.XX ±

ANGLE ±5 °

(.38)

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications.

Model 97 & 99

5/8 ” Square Single-Turn Panel Control with Rotary Switch

Product Dimensions

Model 97

(2nd Cup - Switch)

MOUNTING

SURFACE

2.77 ± .38

(.109 ± .015)

15.88

(.625)

REF.

Horizontal Term.

(Switch Types R57, R59, R61, R73)

18.42 ± 0.38

(.725 ± .015)

15.88

(.625)

16.89 ± .51

(.665 ± .020)

8.74 ± 0.25

(.344 ± .010)

2.54

(.100)

4 5

2.41 X 1.14 SLOT 6 PLCS

(.095 ± .045)

2.29

6 PLCS.

(.090)

2.54 ± 0.25

2 PLCS.

(.100 ± .010)

6 2

15.88 ± 0.38

(.625 ± .015)

2 PLCS.

2.77 ± .38

(.109 ± .015)

8.26 ± 0.25

(.325 ± .010)

Model 99

(2nd Cup - Switch)

MOUNTING

SURFACE

2.77 ± .38

(.109 ± .015)

24.77 ± .51

(.975 ± .020)

15.88

(.625)

REF.

Switch Module Variations

Shaft Flat Orientation

120 ° ± 5 ° STD.

FLAT ORIENTATION

(SHAFT AT CCW END)

CCW

POTENTIOMETER

TOTAL ROTATION 300 °

5.59 ± .38

(.022 ± .015)

16.89 ± .51

(.665 ± .020)

2.41 X 1.14

SLOT 6 PLCS

(.095 ± .045)

CCW DETENT

25 ° MAX.

ACTUATION

ANGLE

(TYPES 51,

53, 55, 57, 59,

61, 71, 73)

CW DETENT

25 ° MAX.

ACTUATION ANGLE

(TYPES 50, 52, 54,

56, 58, 60, 70, 72)

4 5

NOTE: Switch terminals shown in vertical position.

DPST (NC/NC)

(TYPES 54, 55, 60, 61)

DPST (NO/NO)

(TYPES 52, 53, 58, 59)

DPDT (NC/NC)

(TYPES 70, 71, 72, 73)

2.29

6 PLCS.

(.090)

DPST (NO/NC)

(TYPES 50, 51, 56, 57)

Switch contacts shown in detent position.

4.45 ± .38

(.175 ± .015)

2.77 ± .38

(.109 ± .015)

.381

TOLERANCES EXCEPT AS SHOWN: DECIMAL .XXX ± (.015 )FRACTION ± 1/64

9.65

.XX ±

ANGLE ±5 °

(.38)

DIMENSIONS:

(INCHES)

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications.

查看更多（仅显示前5页内容，查看全部内容请下载文档。）>

推荐资源

恩智浦在中国大陆和台湾地区启动NFC合作伙伴计划: 恩智浦在中国大陆和台湾地区启动NFC合作伙伴计划恩智浦推出独一无二的生态系统，助力NFC技术实现跨设备、跨应用普及中国上海，2011年6月7日 —— 恩智浦半导体NXP Semiconductors N.V. (N ......; 恩智浦半导体无线连接

中断中遇到的问题: P1OUT=BIT0+BIT3;//P1IN低电平跳转,为什么呢？求大神指点...; 芯风作浪微控制器 MCU

一种基于自适应分频的频率测量方法及其实现: 要点：分析了等精度测频在实现时存在的问题，介绍了一种基于自适应分频法的频率测量技术，可达到简化测量电路、提高系统可靠性、实现高精度和宽范围测量的目的。由于PC104总线、FPGA等嵌入式技 ......; feifei 测试/测量

MOS管控制电磁阀，是否可以省掉续流二极管: 469167 如图，二极管源极的电压，在电磁阀复位时会等于24V+电磁阀电感线圈产生的电压。如果这个电压可以确保在MOS管的耐压范围内，可不可以省掉续流二极管。这样做有没有什么风险。 ...; sfcsdc 模拟电子

请问有没有朋友会用VB做软件的？: 急求有没有朋友会用VB开发软件，软件的最基本功能是将屏幕上的数据打包成一定格式的数据包通过网卡（RJ45口）发送出去（与QQ的远程协助有点类似），如果有朋友会的话，希望能够一起合作，详细事 ......; wenhuawu FPGA/CPLD

体感手套 #3 蓝牙透传连接和手机APP测试: 1. 经过测试未果的板载蓝牙没有时间开发驱动。其实这是是TI 2640的全能蓝牙模块，支持蓝牙4.1，还可以支持音频。所以驱动是比较考验功底的。在其他芯片的驱动中，都要有一个厂家提供的启动脚本 ......; 北方 DIY/开源硬件专区

基于中颖电子的SH6613的空调遥控器设计

中颖电子的SH66xx系列4位单片机具有速度快, 功耗低, 结构简单易用,性价比高等特点, 广泛应用于遥控器,各种电器控制, 多功能计算器,万年历,掌上游戏机等产品。SH6613是其中的一款具有双晶振及液晶驱动功能的单片机, 它的基本功能如下: 　　程序存储器(ROM): 4096×16 　　数据存储器(RAM): 512×4 　　输入输出口：8个　　液晶驱动：34×4 　　其中Se...[详细]
基于Nios II的多生理参数处理系统

　　随着医疗仪器设备向智能化、微型化、系列化、数字化和多功能方向的发展，医疗设备中逻辑控制器件也由采用中、小规模的集成芯片发展到应用现场可编程门阵列FPGA(Field Programmable Gate Array)。使用FPGA器件可以大大缩短医疗设备的研制周期，减少开发成本，同时还可以很方便地对设计进行在线修改，因此FPGA在医疗设备中有很广泛的应用。　　本文主要搭建一个多生理参数测...[详细]
英飞凌首超意法瑞萨工业份额排名第一

　　据市场调研公司Semicast最近发表的研究报告，英飞凌（Infineon）首次在工业市场排名第一，超过了意法半导体（ST）和瑞萨（Renesas）科技。　　据这项反映2007年市场状况的研究报告，英飞凌的市场份额从上一年的6.4%上升到7.5%。意法半导体的份额则从7.8%降至7.0%。瑞萨科技的市场份额从5.4%提高到6.5%。德州仪器（TI）的市场从5.7%上升到6.3%，但它的排...[详细]
超高频RFID与其他无线网络的电磁兼容性研究

　　无线射频识别(RFID)技术是一种非接触式的自动识别技术，它通过射频信号从目标对象读写相关数据实现自动识别。RFID基本系统由标签、阅读器以及读写器天线3部分组成。　　RFID技术利用射频信号作为信息传输中介实现远距离信息获取，通过高数据速率实现对高速运动物体的识别，并可同时识别多个标签。正由于RFID技术的诸多优点，它在物流管理、公共安全、仓储管理、门禁防伪等方面的应用迅速展开，国际上...[详细]
微机电系统(MEMS)的繁荣时代已经到来

　　微机电系统(MEMS)正逐渐进入消费品、工业、医药、汽车及计算机应用市场。而且，我们不能忽视它们在仪器、军事和科研行业的稳步进展。显而易见，微机电系统的繁荣时代已经到来。　　在最近的大型展会中的大量演讲都说明了这一事实。MEMS技术的成熟为何如此迅速？许多观察者认为其原因有三：MEMS集成电路测试、原型开发和封装的标准开发，MEMS生产和工艺的进步，以及软件设计工具的改进。　　MEM...[详细]
基于逻辑分析内核的FPGA电路内调试技术

　　随着FPGA融入越来越多的能力，对有效调试工具的需求将变得至关重要。对内部可视能力的事前周密计划将能使研制组采用正确的调试战略，以更快完成他们的设计任务。　　“我知道我的设计中存在一个问题，但我没有很快找到问题所需要的内部可视能力。”由于缺乏足够的内部可视能力，调试FPGA基系统可能会受挫。使用通常包含整个系统的较大FPGA时，调试的可视能力成为很大的问题。为获得内部可视能力，设计工程师必...[详细]
热量带来的棘手问题

　　在大多数情况下保持心脏环境的紧凑和温暖是有益的，但是对于电子心脏扫描仪却是另一回事了。当GE医疗在设计一种据称是目前最快成像速度的扫描仪时，高速运行的芯片需要大功率能量供给，结果导致温度升高而影响系统运行的稳定性。　　工程师们几乎没有想到用硅酮胶帮助散热，能成为这个设计方案获得成功的关键因素。当他们开始寻找散热方法时，GE SilCool LTR silicone提供了一种散热解决方案。...[详细]
台湾媒体称马英九暗示开放12吋晶圆厂“登陆”

　　马英九10日抛出扩大开放晶圆厂登陆想法。他表示，美国半导体大厂英特尔公司，去年宣布成立大陆12吋晶圆90纳米制程的生产工厂，如果美国可以容许英特尔到大陆去，“我相信我们进一步开放应该是合理、也是必要的政策”。　　据台湾《联合报》报道，马英九昨天在接见美商应用材料公司全球总裁史宾林特，马英九说，台湾半导体晶圆代工产业是世界龙头，IC设计所占比例名列前茅，封装测试也是全球第一，因此应用材料公...[详细]
合理布局是IC产业未来健康发展的关键

　　我国IC(集成电路)产业地区间发展差异显著，企业分布相对集中在北京(京津环渤海)、上海(长三角)和深圳(珠三角)三个地区。中西部地区IC产业在西安、成都、武汉等市的带动下正在迅速崛起。近年来，在相关政策推动下，IC产业集群效应日益显现，在北京、大连、上海、杭州、深圳、珠海以及中西部个别城市，初步形成了一批初具规模和各具特色的IC产业群。但同时，我们也发现在各地的产业园区和集成电路产业基地的建...[详细]
FOX ELECTRONICS 推出新的低成本振荡器

2008 年7月,Fox Electronics 推出了一种抖动极低的小型硅振荡器。该振荡器的 LVDS 和 LVPECL 版本属于 Fox 新的 XpressO(tm) 系列，成本比传统的 LVDS/LVPECL 石英晶体振荡器要低30%。减噪 DSM 技术和专有的低噪音架构使这一3.3伏的 XpressO 振荡器能够减低抖动和相位噪音。其革命性的设计和专用集成电路 (...[详细]
ST的RGB LED驱动器单片驱动8个像素

2008 年 7 月 9 日， ST 推出一款驱动电流高达 80mA 的 24 路恒流输出 RGB LED 驱动器 STP24DP05 。在一个 7 x 7mm 的 TQFP48 封装内，新产品效能相当于三个普通的 8 路输出驱动器。由众多高亮度 LED 组成的视频显示器和广告牌，采用 ...[详细]
英特尔推出新的嵌入式新处理器及芯片组

　　英特尔推出了面向嵌入式用户的英特尔® 酷睿™2 双核处理器 T9400和移动式英特尔® GM45 高速芯片组，并提供长达7年的超长生命周期支持。本次推出的处理器和芯片组是全新的英特尔® 迅驰® 2 平台的构成组件，可为移动应用程序带来更耐久的电池使用时间和广泛的无线网络互操作性。　　新推出的英特尔® 酷睿™2 双核处理器 T9400经验证可支持英特尔® 5100 内存控制器中枢(MCH)...[详细]
RFID(射频标识) 测试技术分析

　　随着阅读器与标签价格的降低和全球市场的扩大，射频标识 RFID(以下简称RFID)的应用与日俱增。标签既可由阅读器供电(无源标签)，也可以由标签的板上电源供电(半有源标签和有源标签)。由于亚微型无源 CMOS 标签的成本降低，库存和其他应用迅速增加。一些评估表明，随着无源标签的价格持续下降，几乎每一个售出产品的内部都将有一个 RFID 标签。由于无源 RFID 标签的重要性及其独特的工程实现...[详细]
AMD、英特尔之间芯片之战未来进一步升级

　　据国外媒体报道，AMD公司正在研制一种应用于移动设备和笔记本电脑的低功率处理器，该公司于周五证实了这个消息。　　该芯片将与英特尔的原子处理器竞争，有可能取代配备于儿童的二甲酚橙笔记本电脑上的AMD低功耗单晶片Geode x86系统。基于x86的系统芯片设计于2003年曾得到美国国家半导体的嘉奖，Geode是还可应用于薄客户机和嵌入式设备。AMD公司拒绝发布芯片的推出日期。　　AMD去...[详细]
MIPS32™ 为Broadcom 路由器添彩

MIPS 科技公司今天宣布，其超标量体系结构 MIPS32™ 74K™ 处理器内核成为了博通公司（ Broadcom Corporation ）新的 Intensi-fi® XLR 802.11n 无线 LAN （ WLAN ）芯片组的一部分。该新的 Broadcom® 解决方案提供了一个建立单或双频 802.11n 路由器的单一平台，具有明显的功能组合和价格优势。嵌入...[详细]

器件捷径: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

热门器件

开源项目推荐更多

热门活动更多

热门文章更多

技术资料推荐更多