MKP 422
Vishay BCcomponents
Metallized Polypropylene Filter Film Capacitors
MKP Radial Potted Type
for Surge Voltage Applications
FEATURES
168x12(halfpage)
l
w
7.5 and 10 mm lead pitch. Supplied loose in box
and ammopack. Withstand surge voltages up to
1.5 kV.
Lead (Pb)-free product
RoHS-compliant product
e3
RoHS
COMPLIANT
h
CAPACITANCE TOLERANCE
±
5 %;
±
2 %
lt
RATED (DC) VOLTAGE
P±0.3
Ødt
630 V
Dimensions in mm
RATED (AC) VOLTAGE
160 V
APPLICATIONS
Low losses due to low contact resistance and low loss
dielectric result in applications where high frequency occur or
high stability is preferred. Their small dimensions make them
suitable for circuits with high packaging density.
RATED PEAK-TO-PEAK VOLTAGE
450 V
MARKING
C-value; rated voltage; tolerance; code for manufacturer;
year and week of manufacture; manufacturers type
designation
CLIMATIC CATEGORY
55/085/56
RATED TEMPERATURE (DC)
85
°C
DIELECTRIC
Polypropylene film
RATED TEMPERATURE (AC)
85
°C
ELECTRODES
Vacuum deposited aluminum
MAXIMUM APPLICATION TEMPERATURE
85
°C
ENCAPSULATION
Flame retardant plastic case and epoxy resin
(UL-class 94 V-0)
REFERENCE SPECIFICATIONS
IEC 60384-16
CONSTRUCTION
Wound mono construction
PERFORMANCE GRADE
Grade 1 (long life)
LEADS
Tinned wire
STABILITY GRADE
Grade 1
CAPACITANCE RANGE (E24 SERIES)
0.001 to 0.047 µF
DETAIL SPECIFICATION
For more detailed data and test requirements contact:
filmcaps.roeselare@vishay.com
www.vishay.com
286
For technical questions contact: filmcaps.roeselare@vishay.com
Document Number: 28151
Revision: 21-Nov-05
MKP 422
Metallized Polypropylene Filter Film Capacitors
Vishay BCcomponents
MKP Radial Potted Type
for Surge Voltage Applications
COMPOSITION OF CATALOG NUMBER
TYPE AND PITCHES
422
7.5 mm
10.0 mm
CAPACITANCE
(numerically)
MULTIPLIER
(nF)
0.01
0.1
2
3
Example:
103
=
100 x 1
=
100 nF
2222 422
BFC2* 422
XX XX X
XX XX X
* Use this partnumber for those with access to the
Vishay’s SAP system and Partners website within
the Americas
PREFERRED TYPES
TYPE
422
PACKAGING
Ammopack
LEAD CONFIGURATION
C-TOL
H
=
18.5 mm; P
0
=
12.7 mm
H
=
18.5 mm; P
0
=
12.7 mm
lead length 4.0
+1.0/−0.5
mm
±
2%
±
5%
±
5%
±
2%
630 V
1
ON REQUEST
Ammopack
422
Loose in box
0
3
4
SPECIFIC REFERENCE DATA
DESCRIPTION
Tangent of loss angle:
C
≤
0.0047 µF
Rated voltage pulse slope (dU/dt)
R
at 630 V (DC)
R between leads at 500 V; 1 minute
R between interconnected leads and case at 500 V; 1 minute
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
≤
5
×
10
−4
50 V/µs
>
100000 MΩ
>
100000 MΩ
1000 V; 1 minute
2840 V; 1 minute
VALUE
at 100 kHz
≤
15
×
10
−4
Document Number: 28151
Revision: 21-Nov-05
For technical questions contact: filmcaps.roeselare@vishay.com
www.vishay.com
287
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
