HMC364S8G
/
364S8GE
v04.1109
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
Features
Ultra Low SSB Phase Noise: -145 dBc/Hz
Wide Bandwidth
Output Power: 4 dBm
Single DC Supply: +5V
S8G SMT Package
6
FREQUENCY DIVIDERS & DETECTORS - SMT
Typical Applications
Prescaler for DC to X Band PLL Applications:
• Satellite Communication Systems
• Fiber Optic
• Point-to-Point and Point-to-Multi-Point Radios
• VSAT
Functional Diagram
General Description
The HMC364S8G & HMC364S8GE are low noise
Divide-by-2 Static Dividers with InGaP GaAs HBT
technology in 8 lead surface mount plastic pac-
kages. This device operates from DC (with a square
wave input) to 12.5 GHz input frequency with a single
+5V DC supply. The low additive SSB phase noise
of -145 dBc/Hz at 100 kHz offset helps the user
maintain good system noise performance.
Electrical Specifi cations,
T
A
= +25° C, 50 Ohm System, Vcc= 5V
Parameter
Maximum Input Frequency
Minimum Input Frequency
Input Power Range
Sine Wave Input. [1]
Fin = 1 to 10 GHz
Fin = 10 to 12 GHz
Fin = 12 to 12.5 GHz
Output Power
Fin = 6 GHz
Fin = 9 GHz
Fin = 11 GHz
Fin = 12.5 GHz
Reverse Leakage
SSB Phase Noise (100 kHz offset)
Output Transition Time
Supply Current (Icc)
1. Divider will operate down to DC for square-wave input signal.
Both RF Outputs Terminated
Pin = 0 dBm, Fin = 6 GHz
Pin = 0 dBm, Fout = 882 MHz
-15
-10
-4
2
-2
-5
-8
40
-145
100
105
Conditions
Min.
12.5
Typ.
13.5
0.2
>-20
>-15
>-8
5
0.5
+10
+5
+2
Max.
Units
GHz
GHz
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dB
dBc/Hz
ps
mA
6 - 32
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC364S8G / 364S8GE
v04.1109
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
Input Sensitivity Window, T= 25 °C
20
Input Sensitivity Window vs. Temperature
20
6
FREQUENCY DIVIDERS & DETECTORS - SMT
6 - 33
10
INPUT POWER (dBm)
INPUT POWER (dBm)
10
0
Recommended
Operating Window
0
-10
-10
Min Pin +25 C
Max Pin +25 C
Min Pin +85 C
Max Pin +85 C
Min Pin -40 C
Max Pin -40 C
-20
-20
-30
0
3
6
9
12
15
INPUT FREQUENCY (GHz)
-30
0
3
6
9
12
15
INPUT FREQUENCY (GHz)
Output Power vs. Temperature
10
SSB Phase Noise
Performance, Pin= 0 dBm, T= 25 °C
0
SSB PHASE NOISE (dBc/Hz)
-20
-40
-60
-80
-100
-120
-140
-160
2
10
OUTPUT POWER (dBm)
7
4
+25 C
+85 C
-40 C
1
-2
-5
0
3
6
9
12
15
INPUT FREQUENCY (GHz)
10
3
10
4
10
5
10
6
10
7
OFFSET FREQUENCY (Hz)
Output Harmonic
Content, Pin= 0 dBm, T= 25 °C
0
Pfeedthru
3rd Harmonic
Reverse Leakage, Pin= 0 dBm, T= 25 °C
0
OUTPUT LEVEL (dBm)
-10
-10
POWER LEVEL (dBm)
Both Output Ports Terminated
One Output Port Terminated
-20
-20
-30
-30
-40
-40
-50
0
3
6
9
12
15
INPUT FREQUENCY (GHz)
-50
0
3
6
9
12
15
INPUT FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC364S8G / 364S8GE
v04.1109
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
6
FREQUENCY DIVIDERS & DETECTORS - SMT
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
700
500
AMPLITUDE (mV)
300
100
-100
-300
-500
-700
22.7
Absolute Maximum Ratings
RF Input (Vcc = +5V)
Vcc
VLogic
Thermal Resistance (RTH)
(junction to ground paddle)
Storage Temperature
Operating Temperature
-13 dBm
+5.5V
Vcc -1.6V to Vcc -1.2V
69.3 °C/W
-65 to -150 °C
-40 to +85 °C
Typical Supply Current vs. Vcc
Vcc (V)
23.1
23.5
23.9
24.3
24.7
Icc (mA)
93
105
115
4.75
5.00
5.25
TIME (nS)
Note: Divider will operate over full voltage range shown above
Outline Drawing
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
HMC364S8G
HMC364S8GE
Package Body Material
Low Stress Injection Molded Plastic
RoHS-compliant Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
100% matte Sn
MSL Rating
MSL1
MSL1
[1]
Package Marking
[3]
HMC364
XXXX
HMC364
XXXX
[2]
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
6 - 34
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC364S8G / 364S8GE
v04.1109
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
Pin Description
Pin Number
Function
Description
Interface Schematic
6
Divided output 180° out of phase with pin 3.
1
OUT
2, 6
N/C
No Connection
3
OUT
Divided Output.
4
VCC
Supply voltage 5V ± 0.25V.
5
IN
RF Input must be DC blocked.
7
IN
RF Input 180° out of phase with pin 5 for differential operation.
A/C ground for single ended operation
8
GND
Exposed paddle must be connected to RF/DC ground.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 35
FREQUENCY DIVIDERS & DETECTORS - SMT
HMC364S8G / 364S8GE
v04.1109
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
6
FREQUENCY DIVIDERS & DETECTORS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 104631
[1]
Item
J1 - J3
C1 - C4
C5
C6
U1
PCB
[2]
Description
PCB Mount SMA RF Connector
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
10 μF Tantalum Capacitor
HMC364S8G / HMC364S8GE Divide-by-2
104627 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and backside ground slug should be
connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available
from Hittite upon request. This evaluation board is
designed for single ended input testing. J2 and J3
provide differential output signals.
6 - 36
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
