Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2014. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor-
porating such products, which are caused under the conditions other than those specified in this catalog or indi-
vidual specification.
■
Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■
Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■
All electronic components listed in this catalogue are intended for use in general electronic equipment such as
AV/OA equipment, home electrical appliances, office equipment, information-communication equipment, general
medical equipment, industrial equipment, and automotive applications.
Please be sure to contact TAIYO YUDEN CO., LTD. for further information before using the components for any
equipment which might have a negative impact directly on human life, such as specially controlled medical equip-
ment, transportation equipment (automotive powertrain/train/ship control systems, etc.) and traffic signal system.
Please do not incorporate the components into any equipment requiring a high degree of safety and reliability, such
as aerospace equipment, avionics, nuclear control equipment, submarine system, and military equipment.
For use in high safety and reliability-required devices/circuits of general electronic equipment, thorough safety
evaluation prior to use is strongly recommended, and a protective circuit should be designed and installed as nec-
essary.
■
The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called
“TAIYO
YUDEN’ official sales channel”
s
).
It is only applicable to the products purchased from any of TAIYO YUDEN’ official sales channel.
s
■
Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■
Caution for export
Certain items in this catalog may require specific procedures for export according to
“Foreign
Exchange and For-
eign Trade Control Law”of Japan,
“U.S.
Export Administration Regulations” and other applicable regulations.
,
Should you have any question or inquiry on this matter, please contact our sales staff.
1
5
SMD POWER INDUCTORS(NS SERIES)
SMD POWER INDUCTORS（NS SERIES）
■PART
NUMBER
*Operating Temp. :
-40½125℃（Including self-generated heat）
REFLOW
AEC-Q200
N
S △
①
1
0
1 4
②
5
T △
③
1
0 0
④
M
⑤
N △ V
⑥
⑦
△＝Blank space
①Series name
Code
NS△
②Dimensions（L×W×H）
Code
10145
10155
10165
12555
12565
12575
③Packaging
Code
T△
Series name
SMD inductor
Dimensions（L×W×H）［mm½
10.1×10.1×4.5
10.1×10.1×5.5
10.1×10.1×6.5
12.5×12.5×5.5
12.5×12.5×6.5
12.5×12.5×7.5
④Nominal inductance
Code（example）
1R0
100
101
※R＝Decimal point
⑤Inductance tolerance
Code
M
N
⑥Internal code
Code
N△
⑦Internal code
Code
V
Nominal inductance［μ
H½
1.0
10
100
Inductance tolerance
±20％
±30％
INDUCTORS POWER INDUCTORS
／
54
Packaging
Taping
Internal code
Internal code
Inductor for Industrial and Automotive
■STANDARD
EXTERNAL DIMENSIONS / MINIMUM QUANTITY
Ｗ
Ｌ
Ｈ
Type
NS 10145
NS 10155
NS 10165
NS 12555
NS 12565
NS 12575
L
10.1±0.3
（0.398±0.012）
10.1±0.3
（0.398±0.012）
10.1±0.3
（0.398±0.012）
12.5±0.3
（0.492±0.012）
12.5±0.3
（0.492±0.012）
12.5±0.3
（0.492±0.012）
W
10.1±0.3
（0.398±0.012）
10.1±0.3
（0.398±0.012）
10.1±0.3
（0.398±0.012）
12.5±0.3
（0.492±0.012）
12.5±0.3
（0.492±0.012）
12.5±0.3
（0.492±0.012）
H
4.5±0.35
（0.177±0.014）
5.5±0.35
（0.217±0.014）
6.5±0.35
（0.256±0.014）
5.5±0.35
（0.217±0.014）
6.5±0.35
（0.256±0.014）
7.5±0.35
（0.295±0.014）
a
2.8±0.1
（0.110±0.004）
2.8±0.1
（0.110±0.004）
2.8±0.1
（0.110±0.004）
3.0±0.1
（0.118±0.004）
3.0±0.1
（0.118±0.004）
3.0±0.1
（0.118±0.004）
b
2.0±0.15
（0.079±0.006）
2.0±0.15
（0.079±0.006）
2.0±0.15
（0.079±0.006）
2.0±0.15
（0.079±0.006）
2.0±0.15
（0.079±0.006）
2.0±0.15
（0.079±0.006）
Minimum quantity [pcs]
2000
2000
2000
2000
2000
2000
Unit：mm（inch）
Recommended Land Patterns
Surface Mounting
・Mounting and soldering conditions should be checked beforehand.
・Applicable soldering process to these products is reflow soldering only.
Type
NS 10145
NS 10155
NS 10165
NS 12555
NS 12565
NS 12575
A
2.5
2.5
2.5
2.5
2.5
2.5
B
5.6
5.6
5.6
8.6
8.6
8.6
C
3.2
3.2
3.2
3.2
3.2
3.2
Unit：mm
hq_i_smd_NS_e-E02R01_V1
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
1
5
■PART
NUMBER
・
：AEC-Q200 qualified
All the SMD Power Inductors of Catalog Lineup are tested based on the test conditions and methods defined in AEC-Q200.
Please consult with TAIYO YUDEN’s official sales channel for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.
・ All the SMD Power Inductors of Catalog Lineup are Compliance RoHS.
Note)
・ Information about usage environment or condition is necessary depending on the application and circuit condition. Please contact TAIYO YUDEN sales channels.
●NS
10145 type
Part number
NS 10145T 1R0NN V
NS 10145T 1R5NN V
NS 10145T 2R2NN V
NS 10145T 3R3NN V
NS 10145T 4R7NN V
NS 10145T 5R6NN V
NS 10145T 6R8NN V
NS 10145T 100MN V
NS 10145T 150MN V
NS 10145T 220MN V
NS 10145T 330MN V
NS 10145T 470MN V
NS 10145T 680MN V
NS 10145T 101MN V
NS 10145T 151MN V
NS 10145T 221MN V
NS 10145T 331MN V
NS 10145T 471MN V
NS 10145T 681MN V
NS 10145T 102MN V
NS 10145T 152MN V
●NS
10155 type
Part number
NS
NS
NS
NS
NS
NS
NS
NS
10155T
10155T
10155T
10155T
10155T
10155T
10155T
10155T
1R5NN V
2R2NN V
3R3NN V
4R7NN V
6R8NN V
100MN V
150MN V
220MN V
Nominal inductance
［μH½
1.5
2.2
3.3
4.7
6.8
10
15
22
Inductance tolerance
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
DC Resistance
［Ω½（±20％）
0.0060
0.0072
0.0097
0.0112
0.0159
0.0200
0.0310
0.0430
Rated current ※） ［A½
Saturation current
Temperature rise current
Idc2
Idc1
11.90
8.39
10.00
7.61
8.50
6.49
7.40
6.01
6.00
4.98
4.49
4.40
4.03
3.40
3.37
2.80
Measuring
frequency［kHz½
100
100
100
100
100
100
100
100
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
［μH½
1.0
1.5
2.2
3.3
4.7
5.6
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
1500
Inductance tolerance
±30％
±30％
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
DC Resistance
［Ω½（±20％）
0.0049
0.0060
0.0085
0.0100
0.0144
0.0181
0.0230
0.0270
0.0381
0.0570
0.0880
0.130
0.150
0.230
0.350
0.510
0.700
1.03
1.57
2.58
3.70
Rated current ※） ［A½
Saturation current
Temperature rise current
Idc2
Idc1
12.54
8.90
10.34
7.99
8.91
6.64
7.33
6.10
6.69
5.03
5.85
4.45
5.05
4.22
4.22
3.10
3.44
3.00
2.87
2.30
2.36
1.90
2.00
1.50
1.66
1.45
1.40
1.10
1.11
0.86
0.91
0.78
0.71
0.64
0.61
0.52
0.50
0.42
0.41
0.32
0.36
0.27
Measuring
frequency［kHz½
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
INDUCTORS POWER INDUCTORS
／
●NS
10165 type
Part number
NS
NS
NS
NS
NS
NS
NS
NS
10165T
10165T
10165T
10165T
10165T
10165T
10165T
10165T
1R5NN V
2R2NN V
3R3NN V
4R7NN V
6R8NN V
100MN V
150MN V
220MN V
Nominal inductance
［μH½
1.5
2.2
3.3
4.7
6.8
10
15
22
Inductance tolerance
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
DC Resistance
［Ω½（±20％）
0.0062
0.0074
0.0086
0.0112
0.0140
0.0174
0.0280
0.0350
Rated current ※） ［A½
Saturation current
Temperature rise current
Idc2
Idc1
13.60
8.04
10.80
7.32
9.30
6.76
7.70
5.88
6.00
5.22
5.20
4.66
3.60
3.84
3.10
3.41
Measuring
frequency［kHz½
100
100
100
100
100
100
100
100
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
※
） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_i_smd_NS_e-E02R01_V1.xls
1
5
55
■PART
NUMBER
●NS
12555 type
Part number
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
12555T
6R0NN
100MN
150MN
220MN
330MN
470MN
680MN
101MN
151MN
221MN
331MN
471MN
681MN
102MN
152MN
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
Nominal inductance
［μH½
6.0
10
15
22
33
47
68
100
150
220
330
470
680
1000
1500
Inductance tolerance
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
DC Resistance
［Ω½（±20％）
0.0140
0.0175
0.0233
0.0297
0.0415
0.0618
0.0832
0.117
0.215
0.270
0.410
0.520
0.870
1.44
1.73
Rated current ※） ［A½
Saturation current
Temperature rise current
Idc2
Idc1
5.01
5.60
4.73
5.04
3.89
4.18
3.20
3.81
2.64
3.16
2.23
2.70
1.81
2.14
1.53
1.86
1.22
1.30
1.00
1.18
0.82
0.96
0.68
0.80
0.60
0.61
0.47
0.46
0.40
0.44
Measuring
frequency［kHz½
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
●NS
12565 type
Part number
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
12565T
12565T
12565T
12565T
12565T
12565T
12565T
12565T
12565T
12565T
12565T
12565T
2R0NN
4R2NN
7R0NN
100MN
150MN
220MN
330MN
470MN
680MN
101MN
151MN
221MN
V
V
V
V
V
V
V
V
V
V
V
V
Nominal inductance
［μH½
2.0
4.2
7.0
10
15
22
33
47
68
100
150
220
Inductance tolerance
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
DC Resistance
［Ω½（±20％）
0.0080
0.0126
0.0162
0.0199
0.0237
0.0310
0.0390
0.0575
0.0775
0.123
0.173
0.273
Rated current ※） ［A½
Saturation current
Temperature rise current
Idc2
Idc1
13.91
7.60
9.40
5.91
7.80
5.21
6.00
4.75
5.60
4.33
4.20
3.91
3.80
3.22
3.34
2.78
2.70
2.30
2.23
1.81
1.80
1.54
1.39
1.18
Measuring
frequency［kHz½
100
100
100
100
100
100
100
100
100
100
100
100
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Ratio to rated current
(%)
80
60
40
20
0
-40 -20
Ratio to rated current
(%)
INDUCTORS POWER INDUCTORS
／
56
●NS
12575 type
Part number
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
12575T 1R2NN V
12575T 2R7NN V
12575T 3R9NN V
12575T 5R6NN V
12575T 6R8NN V
12575T 100MN V
12575T 150MN V
12575T 220MN V
12575T 330MN V
12575T 470MN V
12575T 680MN V
12575T 101MN V
12575T 151MN V
12575T 221MN V
12575T 102MN V
Nominal inductance
［μH½
1.2
12
2.7
3.9
5.6
6.8
10
15
22
33
47
68
100
150
220
1000
Inductance tolerance
±30％
±30％
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
DC Resistance
［Ω½（±20％）
0.0058
0 0058
0.0085
0.0099
0.0116
0.0131
0.0156
0.0184
0.0260
0.0390
0.0515
0.0900
0.110
0.161
0.300
1.170
Rated current ※） ［A½
Saturation current
Temperature rise current
Idc2
Idc1
18.08
9.15
18 08
9 15
13.91
7.69
12.10
7.38
10.20
6.36
9.50
5.84
7.65
5.55
6.30
5.22
5.50
4.05
4.30
3.48
3.60
2.95
2.78
2.10
2.50
2.01
1.90
1.51
1.81
1.10
0.80
0.53
Measuring
frequency［kHz½
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
EHS
RoHS
R HS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
※
） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
■
Derating of Rated Current
●NS
series
Delating of current is necessary for NS series depending on ambient temperature.
Please refer to the chart shown below for appropriate derating of current.
120
100
NS101 type
120
100
80
60
40
20
0
-40 -20
NS125 type
Idc 1
Idc 2
0 20 40 60 80 100 120 140
Ambient Temperature (℃)
Idc 1
Idc 2
0 20 40 60 80 100 120 140
Ambient Temperature (℃)
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_i_smd_NS_e-E02R01_V1.xls
1
5
SMD POWER INDUCTORS (NS SERIES)
■PACKAGING
①Packing Quantity
Type
NS10145
NS10155
NS10165
NS12555
NS12565
NS12575
②Tape Material
●Embossed
Tape
Standard Quantity (1reel) [pcs]
Embossed Tape
500
500
500
500
500
500
Minimum Quantity [pcs]
Embossed Tape
2000
2000
2000
2000
2000
2000
Top tape
Chip Filled
Sprocket hole
Base tape
③Taping dimensions
●Embossed
tape 24mm wide (0.945 inches wide)
Chip cavity
Chip
Type
NS10145
NS10155
NS10165
NS12555
NS12565
NS12575
Chip cavity
A
B
10.5±0.1
10.5±0.1
（0.413±0.004）
（0.413±0.004）
10.5±0.1
10.5±0.1
（0.413±0.004）
（0.413±0.004）
10.5±0.1
10.5±0.1
（0.413±0.004）
（0.413±0.004）
13.0±0.1
13.0±0.1
（0.512±0.004）
（0.512±0.004）
13.0±0.1
13.0±0.1
（0.512±0.004）
（0.512±0.004）
13.0±0.1
13.0±0.1
（0.512±0.004）
（0.512±0.004）
Insertion pitch
F
16.0±0.1
（0.630±0.004）
16.0±0.1
（0.630±0.004）
16.0±0.1
（0.630±0.004）
16.0±0.1
（0.630±0.004）
16.0±0.1
（0.630±0.004）
16.0±0.1
（0.630±0.004）
Tape thickness
T
K
0.4±0.1
5.0±0.1
（0.016±0.004）
（0.197±0.004）
0.4±0.1
6.0±0.1
（0.016±0.004）
（0.236±0.004）
0.4±0.1
7.0±0.1
（0.016±0.004）
（0.276±0.004）
0.4±0.1
6.1±0.1
（0.016±0.004）
（0.240±0.004）
0.4±0.1
7.1±0.1
（0.016±0.004）
（0.280±0.004）
0.4±0.1
8.0±0.1
（0.016±0.004）
（0.315±0.004）
Unit：mm（inch）
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
编译自semiengineering 业界越来越关注人工智能的功耗问题，但这个问题并没有简单的解决方案。这需要深入了解应用、半导体和系统层面的软件和硬件架构，以及所有这些的设计和实现方式。每个环节都会影响总功耗和提供的效用。这是最终必须做出的权衡。 但首先，必须解决效用问题。电力是否被浪费了？“我们将电力用于有价值的用途，”Ansys（现为新思科技旗下公司）产品营销总监 Marc Swi...[详细]
PCB设计
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
