Dimensions apply to uncoated tubing. Allow approximately 1.3 mm for coating.
Tubing with sealant on ends only, without sealant, or of non-standard lengths is available
subject to special order.
SST/SST-FR
Ordering example:
SST
-6
-07 M /FR
/97 /RS/NM
No Mark (optional)
Colour
Black (standard colour)
Other colours available on special order
Sealant Options
/RS=Ribbed Sealant
Standard for sizes 03 through to 27
/SS=Smooth Sealant
Standard for sizes 30 and above
Pre-coat adhesive options:
/97=Hot Melt Adh Standard for SST-FR
/226=MASTIC Standard for SST
FR = Flame Retardant
Medium wall tubing
Size Expanded (inches)
Length in inches
Product description
Ordering example:
SST
-6-07M/FR/RS/NM
SST-24-45/97/SS
Temperature rating
Operating temperature range:
Minimum recovery temperature:
-55
°
C to +90
°
C
+120
°
C
Specifications
Type
SST
-FR
Raychem
RW 2011
RW 2011
RW 2020
RW 2019
SST
/226 (S-1278)
/97(S-1297)
SST/SST-FR
Performance
SST
is a black, crosslinked, polyolefin-based material.
SST
-FR is flame retarded and heat
resistant.
SST
-FR
SST
Test method
Mechanical
Tensile strength (min)
Ultimate elongation (min)
2% secant modulus (max)
Heat ageing
Tensile strength (min)
Ultimate elongation (min)
Heat shock
4 h at 225
°
C
Low temperature flexibility
4 h at -55
°
C
Electrical
Dielectric strength
Volume resistivity (min)
Flammability
Flammability (method B)
Chemical
Corrosion
Water absorption (max)
Specific gravity (max)
Fungus resistance
Colour stability
Fluid resistance
(24 h at room temperature)
De-icing fluid (MIL-A-8243)
Hydraulic fluid (MIL-H-5606)
JP-8 (MIL-T-83133)
Lubricating oil (MIL-L-7808)
Lubricating oil (MIL-L-23699)
5% NaCI (0-S-1926)
After immersion in the above fluids:
Tensile strength (min)
Ultimate elongation (min)
ASTM D638
ASTM D638
ASTM D882
ASTM D2671, D412
ASTM D638
ASTM D638
MIL-I-23053/15A
MIL-I-23053/15A
ASTM D2671
ASTM D876
MIL-I-23053/15A
MIL-I-23053/15A
ASTM D570
ASTM D1505
ASTM G21
MIL-I-23053/15A
MIL-I-23053/15A
8.4 Mpa
200%
170 Mpa
(168 h at 175
°
C)
7 Mpa
100%
Pass
Pass
7.9 MV/m
10
13
ohm.cm
15 sec
Pass
0.5%
1.5
≤
1
Pass
8.4 Mpa
200%
(168 h at 150
°
C)
7 Mpa
100%
Pass
Pass
7.9 MV/m
10
13
ohm.cm
N/A
Pass
0.5%
1.1
N/A
Pass
ASTM D638
ASTM D638
5 Mpa
100%
5 Mpa
100%
Raychem and SST/SST-FR are trademarks of Tyco Electronics Corporation.
All of the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their
application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics
only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or
consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition
Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
