HGM SERIES
MATERIALS:
Pin Contacts:
Pin Diameter:
Socket Contacts:
Contact Wires:
Termination:
Support Elements:
SMT Leads:
Hardware:
Insulator:
Pin Shields:
FINISHES:
Pin Contacts:
Socket Contacts:
Contact Wires:
SPECIFICATIONS
PhBr per ASTM B139, BeCu per ASTM B196 or B197, or Cu alloy
.030” (.76mm)
BeCu per ASTM B196, or B197
PhBr per ASTM B139 or Cu alloy
Cu alloy
PhBr per ASTM B139
Corrosion resistant steel per ASTM A582 (‘D’ shaped guide receptacles are BeCu per ASTM
B196 or B197) or Cu alloy
Modified polyphenylene sulfide per MIL-M-24519, Type GST-40F
Diallyl Phthalate per ASTM D5948 (Not for New Designs)
Aluminum 5052-H32 per QQ-A-250/8
Gold per ASTM B488 Type II, Class 1.27, Code C over Nickel, 0.000050 min.,
per MIL-DTL-55302 over Copper per SAE AMS 2418 or ASTM B734
Gold per ASTM B488 Type II, Class 1.27, Code C over Nickel, 0.000050 min.,
per MIL-DTL-55302 over Copper per SAE AMS 2418 or ASTM B734
Termination:
Gold per ASTM B488, Class 0.50, Grade C over Nickel, 0.000050 min.,
per MIL-DTL-55302 over Copper per SAE AMS 2418 or ASTM B734 or solder dip over
Nickel, 0.000050 min., per MIL-DTL-55302 over Copper per SAE AMS 2418 or ASTM B734
Support Elements: Nickel, 0.000050 min., over Copper per SAE AMS 2418 or ASTM B734
SMT Leads:
Tin/Lead per SAE-AMS-P-81728
Hardware:
Passivate per SAE-AMS2700 except BeCu hardware to be Nickel plate, 0.000050 min.
Pin Shields:
Black Anodize per MIL-A-8625, Type II, Class 2
PERFORMANCE:
Current Rating:
Insulation Resistance:
Contact Resistance:
Test Voltage (DWV):
5 amp continuous (higher ratings may be supported-contact factory)
5000 megaohms min. – EIA-364-21 & MIL-DTL-55302 (par. 4.5.8)
8 milliohms max, - EIA-364-06 & MIL-DTL-55302 (par. 4.5.5)
1000 VAC RMS @ sea level - EIA-364-20 & MIL-DTL-55302 (par. 4.5.7.1)
300VAC RMS @ 70,000 ft.
Temperature:
-65°C to +125°C (-86°F to +257°F)
Mating Force:
0.15 lbs. x number of contacts, max. - MIL-STD-55302 (par. 4.5.4)
De-mating Force:
0.04 lbs. x number of contacts, min. - MIL-STD-55302 (par. 4.5.4)
Contact Life:
100,000 mating cycles – Exceeds MIL-DTL-55302 (par. 4.5.9)
Solderability:
IPC/EIA J-STD-002, Category 3
Humidity:
IAW EIA-364-31, Method IV, except 7A & 7B (not required)
Vibration:
IAW EIA-364-28 & MIL-DTL-55302 (par. 4.5.10)
Shock:
IAW EIA-364-27 & MIL-DTL-55302 (par. 4.5.14)
Salt Spray:
IAW EIA-364-26 & MIL-DTL-55302 (par. 4.5.11)
Temperature Cycling: IAW EIA-364-32 & MIL-DTL-55302 (par. 4.5.13)
DIMENSIONS:
Catalog product dimensions are nominal. For linear and positional tolerances, contact factory.
All information contained herein is believed to be reliable as of the date of publication, but is subject to change without notice. Current product
drawings and specifications are available upon request from IEH.
IEH warrants its products to be free of defects affecting normal use. If any shipment is found to be defective we will accept return for repair or
replacement at our option within one year of shipment. IEH is not responsible for incidental or consequential damages arising out of the use of
our products.
140 58th Street 8E, Brooklyn, NY 11220
Ph: (718) 492-4448 Fax: (718) 492-9898
www.iehcorp.com
5
DSP 与 ARM 处理器
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
