TMS320C5502 eZdsp Quick Start Guide
C5502 eZdsp
1.0 SYSTEM REQUIREMENTS
USB Cable
DVD
Quick Start Guide
To operate the Spectrum Digital XDS100 JTAG Emulator with your system it needs to meet
the following requirements:
• 2 GB of free hard disk space
• Microsoft Windows
TM
XP/Vista/Win 7
• Min 1 GB ram, 2 GB recommended
• Min 1.5 GHz., dual core recommended
• Color Display
• Internet access
• USB port
• DVD reader
2.0 WHAT’S INCLUDED
The TMS320C5502 eZdsp kit includes:
• TMS320C5502 eZdsp
• USB extension cable
• TMS320C5502 eZdsp DVD with Code Composer Studio (CCS)
• This Quick Start Guide
514326-0001 Rev A
3.0 C5502 eZdsp Installation
Note:
Install
ALL
software prior to connecting the C5502 eZdsp to the computer !
Note:
The user
MUST
be logged onto windows with “Administrative Rights” and any
anti-virus software must be disabled during installations. Please contact your
system administrator if help is needed in this area.
1. If you wish to install the eZdsp5502 target content into your existing CCS then install
then you can skip to step 7. For a new complete install continue with step 2.
2. Insert the Code Composer Studio (CCS) v4 DVD into the computer’s DVD drive and
wait for the auto-run application to start. If the auto-run application does not start then
launch the install via the “Run” icon on the “Start” button.The user prompts will step
the user through the rest of the CCS installation. This installation may take several
minutes. The installation will place a CCS icon on your desktop.
3. At this time plug the C5502 eZdsp J1 connector into a USB port (directly or via
the USB extension cable) on your laptop or PC. Windows will recognize the new
hardware connection and complete the hardware installation automatically.
4. Launch CCS v4 from the shortcut icon on the desktop.
5. A prompt will appear asking for a workspace location. Each time CCS starts up the
main workspace is the main working folder for CCS. The default location will be
(on Windows XP) “C:\Documents and Settings\<user name>\My
Documents\workspace”. To have CCS automatically default to the specified
workspace location, select the “Use this as the default and do not ask again” option.
6. Create a user license. After launching CCS, the user may be prompted to create a
user license to activate the CCS software. Select the “Activate a License” option. Then
click “Use Free Limited License”. This will re-direct you to the Texas Instruments
website to complete the License creation process. Alternatively, the “Activate a
License” step may be bypassed temporarily and completed at a later date by clicking
“Evaluate Code Composer Studio for 30 days”.
7. If you did NOT install the full CCS and just want the eZdsp5502 target content then it
can be installed from the DVD. Run <CDROM>\install_images\emulation\sd_targets\
SetupEZDSP5502.exe, and follow the setup instructions. When the “Location to Save
Files” dialog appears change to your top level CCSv4 directory or a location of your
choice. Typically CCSv4 is installed in “C\Program files\Texas Instruments\ccsv4”.
514326-0001 Rev A
License Screen
4.0 CCS Configuration Instructions
1. Launch CCS v4 from the shortcut on the desktop. (This was created when CCS v4
was installed).
2. The CCS v4 window will appear. Click the “Target” menu, then select “New Target
Configuration File”.
3. The “New Target Configuration” window will appear. Enter a file name that describes
the emulator connection and/or Texas Instruments device being used and click
“Finish”. For example: “C5502_eZdsp”.
4. The “Basic” configuration setup window will open in the CCS v4. Select “Texas
Instruments XDS100v2 USB Emulator” from the “Connection” menu. Type “5502” in
the “Device” field and select “eZdsp5502”, from the list.
514326-0001 Rev A
Configuration Screen
5. Click the “Save” button to save the configuration.
6. Click the “View” menu and select “Target Configurations” to expose the
configuration(s) that have been built or imported. A new tab labeled “Target
Configurations” will become available in the CCS window.
7. Expand the “User Defined” folder. Right-click on the new configuration that has been
created and click “Launch Selected Configuration”.
8. Click “View->Debug” then click “Target->Connect Target”. CCS will attempt to connect
to the C5502 eZdsp and run the GEL file. Once the connection is successful and the
GEL file has finished, the console window will print a message stating
“Target Connection Complete”.
514326-0001 Rev A
5.0 Running the C5502 eZdsp LED Blink Demonstration
1. The C5502 eZdsp must be connected in CCS before proceeding. If the board is not
connected, please refer to section 4.0 of this guide.
2. Click “File->Import”.
3. When the new window appears, expand “CCS” and select “Existing CCS/CCE
Eclipse Project”. Click “Next”.
4. Select “Select Root Directory” and click the “Browse” button. Browse to directory
path “<Install_Dir>\ccsv4\emulation\boards\ezdsp5502_v1\tests\led”.
The default <Install_Dir> is “C:\Program Files\Texas Instruments”
5. Highlight the “LED” folder and click “OK”. Then click “finish”
6. Click “View->C/C++Projects”. A new tab will appear in the CCS v4 window and there
should be a LED project visible.
7. Click “Project->Build Active Project”.
8. When the build is complete, a message will print in the Console Window.
9. Click “Target->Debug Active Project”
10. Click “Target->Run”. The C5502 eZdsp LEDs should now blink.
5.1 Boot Demo Documentation
The factory demo that blinks the LEDs and plays an audio tone when power is first
applied to the eZdsp C5502 is documented here:
<Install_Dir>\ccsv4\emulation\boards\ezdsp5502_v1\demo_boot\ezdsp_demo\
Demo_guide.txt
6.0 Running the C5502 eZdsp Ethernet Demonstration
The C5502 eZdsp Ethernet demo uses a TCP/IP stack written by D.SignT. It can be
found in the following directory:
<Install_Dir>\emulation\boards\ezdsp5502_v1\demo_enet
Instructions for running the demo and more demonstration about the TCP/IP stack can
be found in the PDF file “demo5502.pdf” found in that directory.
514326-0001 Rev A
无线连接
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
