Getting Started, V 2.0, April 2004
PROFET Demo Kit
BTS
BTS
BTS
BTS
5241 L
5234 G
5230GS
6143 D
Automotive Power
N e v e r
s t o p
t h i n k i n g .
Getting Started
PROFET Demo Kit
Preface
The PROFET Demo Kit is a versatile tool to demonstrate the functions of the
BTS 5241L, BTS 5234G, BTS 5230GS and BTS 6143D. It is an ideal tool to become
familiar with the performance of the devices.
The PROFET Demo Kit consists of five different boards devided in two types. The
PROFET are mounted on the power boards which also contain 4 mm plug sockets for
power supply and loads. The power boards are connected via a D-SUB-15 connector to
the control board. The complete PROFET Demo Kit is reverse polarity protected.
There are four different power boards available. The P-DSO-12 board contains
BTS 5241L, a dual channel PROFET in P-DSO-12 power package. The P-DSO-20
board is equipped with BTS 5234G, a dual channel PROFET in P-DSO-20 package.
Two BTS 5230GS dual channel PROFET in P-DSO-14 package are mounted on the P-
DSO-14 board. Two BTS 6143D high current PROFET are available on the Power HIC
board.
Getting Started
2
V 2.0, 2004-04
Getting Started
PROFET Demo Kit
Getting Started
1
Getting Started
This chapter is intended to describe a step by step procedure to get the system running
the first time. For detailed information about the hardware and software of the
PROFET Demo Kit, please refer to the “Tool Description” document.
1.1
Usage of Hardware
The hardware is intended to be used the following way:
1. select one of the power boards
2. connect the control board
3. connect 12 V bulbs to the OUTx plugs of the power boards according to following
table:
Power Board
P-DSO-12
P-DSO-20
P-DSO-14
Power HIC
Chanel 1
Channel 2
Channel 3
Channel 4
-
-
10 W
-
21 W + 21 W + 21 W + 21 W + -
5W
5W
21 W
10 W
55 W
21 W
10 W
60 W
-
10 W
-
4. connect a 12 V power supply, which is able to drive the loads’ current, to the VBB and
GND plug of the power board. The control board is supplied via the power board.
5. check, if the jumper at the control board is placed in position “normal”
6. occasionally, the reset button has to be pressed to start-up the system after power up
7. use switches to switch on the loads
To see the performance and protection features of the device, following evaluation could
be performed:
• Open Load: Remove the load of one channel completely
The open load LED of that channel will be switched on.
• Low load: Reduce the load of one channel (e.g. P-DSO-12: Remove one 21 W bulb)
The open load LED is enabled, when that channel is switched on.
• Short Circuit to GND: Short Circuit one channel
The over temperature LED is enabled, when that channel is switched on.
• Reverse Polarity:
1)
Connect the power supply in reverse polarity.
All loads will be switched on
Note: Please keep in mind that short circuit evaluation as well as normal power
dissipation will heat up the power devices. Harmful temperatures can be
reached at the device packages and the PCB!
1)
the control board is reverse polarity protected
3
V 2.0, 2004-04
Getting Started
Edition 2004-04
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
81669 München, Germany
©
Infineon Technologies AG 2004.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide
(www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.
Total Quality Management
Qualität hat für uns eine umfassende
Bedeutung. Wir wollen allen Ihren
Ansprüchen in der bestmöglichen
Weise gerecht werden. Es geht uns also
nicht nur um die Produktqualität –
unsere Anstrengungen gelten
gleichermaßen der Lieferqualität und
Logistik, dem Service und Support
sowie allen sonstigen Beratungs- und
Betreuungsleistungen.
Dazu gehört eine bestimmte
Geisteshaltung unserer Mitarbeiter.
Total Quality im Denken und Handeln
gegenüber Kollegen, Lieferanten und
Ihnen, unserem Kunden. Unsere
Leitlinie ist jede Aufgabe mit „Null
Fehlern“ zu lösen – in offener
Sichtweise auch über den eigenen
Arbeitsplatz hinaus – und uns ständig
zu verbessern.
Unternehmensweit orientieren wir uns
dabei auch an „top“ (Time Optimized
Processes), um Ihnen durch größere
Schnelligkeit den entscheidenden
Wettbewerbsvorsprung zu verschaffen.
Geben Sie uns die Chance, hohe
Leistung durch umfassende Qualität zu
beweisen.
Wir werden Sie überzeugen.
Quality takes on an allencompassing
significance at Semiconductor Group.
For us it means living up to each and
every one of your demands in the best
possible way. So we are not only
concerned with product quality. We
direct our efforts equally at quality of
supply and logistics, service and
support, as well as all the other ways in
which we advise and attend to you.
Part of this is the very special attitude of
our staff. Total Quality in thought and
deed, towards co-workers, suppliers
and you, our customer. Our guideline is
“do everything with zero defects”, in an
open manner that is demonstrated
beyond your immediate workplace, and
to constantly improve.
Throughout the corporation we also
think in terms of Time Optimized
Processes (top), greater speed on our
part to give you that decisive
competitive edge.
Give us the chance to prove the best of
performance through the best of quality
– you will be convinced.
http://www.infineon.com
Published by Infineon Technologies AG
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
