M
Vishay Thin Film
Commercial Thick Film Resistor, Surface Mount Chip
FEATURES
• High purity alumina substrate for high power
dissipation (2 W max.)
• Wraparound terminations featuring a thin film
adhesion layer covered with a leach resistant
nickel barrier layer for + 150 °C operating
conditions
• High speed laser trimming for high volume requirements
• Ruthenium based cermet thick film for dependable
performance
• Fired-on glass passivation
• Tape and reel packaging standard; static-free waffle pack
available
• Active trim and 0
Ω
chips
• Compliant to RoHS directive 2002/95/EC
Actual
Size
0502
Utilizing proven expertise in thick and thin film resistors to
satisfy your manufacturing needs, Vishay provides a high rel
chip with the same reliability and stability found in military
grade resistors. These chips are available in the widest
range of sizes, values, and performance characteristics.
CONSTRUCTION
Resistor
Overglaze
TYPICAL PERFORMANCE
ABSOLUTE
Alumina
Substrate
Inner Electrode
Nickel Barrier
Plated
Solder
TCR
TOL.
100
1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Ruthenium
10
Ω
to 25 MΩ
± 100 ppm/°C to ± 300 ppm/°C
± 1 % to ± 10 %
ΔR
± 0.15 %
-
-
25 V to 200 V
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 35 dB (typical)
-
CONDITIONS
-
-
- 55 °C to + 125 °C
-
-
-
-
-
-
-
-
-
COMPONENT RATINGS
CASE SIZE
(1)
POWER RATING (mW)
0402
100
0502
100
0504
125
0505
125
0603
150
0705
200
0805
200
1005
250
1010
500
1206
330
1505
350
2010
1000
2208
750
2512
2000
Notes
• Consult factory for nominals above 25 MΩ
(1)
0705 and 0805 are the same (only use 0805 when ordering)
WORKING VOLTAGE (V)
25
25
40
40
40
50
50
75
75
100
100
175
150
200
RESISTANCE RANGE (Ω)
10 to 10M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
70
For technical questions, contact:
thinfilm@vishay.com
Document Number: 60031
Revision: 21-May-10
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
无线连接
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
