3M™ Mini-Clamp II Socket
Designed for Wiring Supplied from Europe and North America
2 mm, IDC, Wiremount, Optional Latch
•
•
•
•
•
•
•
•
•
373
Series
Designed to accommodate typical wiring specifications
per Europe and North America suppliers.
Easy, quick and reliable IDC termination
Integrated cable retention
Design accepts multiple wire size diameter
No special tooling needed
Latch helps enable rugged field termination
Compact design saves board space
High number of mating cycles
RoHS compliant as declared in Regulatory
Information Appendix notes E1 & C1
Date Modified:3/10/2008
TS–2234-D
Sheet 1 of 4
Physical
Insulation
Material: Glass Reinforced Thermoplastic Body & Lower Cover, Transparent Thermoplastic Cover
Flammability: UL 94V-0
Color: Black Body, Cover – White & Color (see Table 1)
Contact
Material: Copper Alloy
Plating
Underplating: 1.27-2.54
μm
[50-100
μ”]
Nickel
Wire Accomodation:
Copper Alloy, 7-19 Bare and Tinned Strands, 0.14-0.50 mm
2
, 20-26 AWG
Wire Insulation:
Flexible Vinyl, Semi-Flexible Vinyl, Polyethylene, X-Linked Polyethylene, or PTFE
For approved cables contact your local sales representative
Marking: 3M Logo, Position Indicator, Wire gauge, Insulator Material
Wiping Area: 0.2
μm
[8
μ”]
Minimum Gold with Lubricant
IDC:
2.0-7.62
μm
[80-300
μ”]
Matte Tin
Electrical
Current Rating:
Voltage Rating:
Insulation Resistance:
Withstanding Voltage:
3.0 Amps
32 Volts
>1x10
6
Ω
at 600 V
DC
1000 V
RMS
at Sea Level
Environmental
Temperature Ratings:
-20
o
C to 85
o
C
UL File No: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M and Scotchlok are trademarks of 3M Company.
For technical, sales or ordering information
call your local sales representative
3M™ Mini-Clamp II Socket
Designed for Wiring Supplied from Europe and North America
2mm, IDC, Wiremount, Optional Latch
373
Series
No Latch
# Positions
3
4
Dim A
13.8 [.54]
15.8 [.62]
Wire OD
Part #
0.25-0.50 mm
2
20-24 AWG
Cover Color
Part #
0.14-0.25 mm
2
24-26 AWG
Cover Color
1.6 ~ 2.0
[.063~.079]
A206
Gray
Table 1
1.2 ~ 1.6
[.047~.063]
A165
Blue
B163
Orange
1.0 ~ 1.2
[.039~.047]
A124
Green
B122
Yellow
0.8 ~ 1.0
[.031~.039]
mm
[inch]
Tolerance Unless
Noted
.0
.00
±.10
mm ±.1
B101
Red
[ ] Dimensions for
Reference Only
Ordering Information
373XX-XXXX-00E-MB
Positions
03 or 04
Wire AWG & OD:
2
AXXX = 0.25-0.50 mm
20-24 AWG
2
BXXX = 0.14-0.25 mm
24-26 AWG
Wire OD – see Table 1
TS-2234-D
Sheet 2 of 4
Note: Terminate using common pliers or 3M
TM
Scotchlok
TM
Crimping Tools E-9BM or E-9E
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M and Scotchlok are trademarks of 3M Company.
For technical, sales or ordering information
call your local sales representative
3M™ Mini-Clamp II Socket
Designed for Wiring Supplied from Europe and North America
2mm, IDC, Wiremount, Optional Latch
373
Series
With Latch
# Positions
3
4
Dim A
23.4 [.92]
25.4 [1.0]
Notes: Latch version for panel mounting
See page 4 for panel cutout
See „No Latch“ for other dimensions
Wire OD
Part #
0.25-0.50 mm
2
20-24 AWG
Cover Color
Part #
0.14-0.25 mm
2
24-26 AWG
Cover Color
1.6 ~ 2.0
[.063~.079]
A206
Gray
Table 2
1.2 ~ 1.6
[.047~.063]
A165
Blue
B163
Orange
1.0 ~ 1.2
[.039~.047]
A124
Green
B122
Yellow
0.8 ~ 1.0
[.031~.039]
mm
[inch]
Tolerance Unless
Noted
.0
.00
±.10
mm ±.1
B101
Red
[ ] Dimensions for
Reference Only
Ordering Information
373XX-XXXX-0PE-MB
Positions
03 or 04
Wire AWG & OD:
2
AXXX = 0.25-0.50 mm
20-24 AWG
2
BXXX = 0.14-0.25 mm
24-26 AWG
Wire OD – see Table 2
TM
Note: Terminate using common pliers or 3M
TM
Scotchlok
Crimping Tools E-9BM or E-9E
TS-2234-D
Sheet 3 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M and Scotchlok are trademarks of 3M Company.
For technical, sales or ordering information
call your local sales representative
3M™ Mini-Clamp II Socket
Designed for Wiring Supplied from Europe and North America
2mm, IDC, Wiremount, Optional Latch
373
Series
TS-2234-D
Sheet 4 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M and Scotchlok are trademarks of 3M Company.
For technical, sales or ordering information
call your local sales representative
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-D
DSP 与 ARM 处理器
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
