CANNON
KPT / KPSE / KPTC Connectors
In Accordance with VG95328
ITT
Corporation
ITT is a diversified leading manufacturer of highly engineered critical
components and customized technology solutions for the energy, trans-
portation and industrial markets. Building on its heritage of innovation,
ITT partners with its customers to deliver enduring solutions to the key
industries that underpin our modern way of life. Founded in 1920, ITT
is headquartered in White Plains, N. Y., with employees in more than 35
countries and sales in a total of approximately 125 countries. The com-
pany generated 2012 revenues of $ 2.2 billion. For more information,
visit www.itt.com.
Our connector portfolio remains the most extensive in the industry, offering a reliable and cost effec-
tive range of interconnect solutions with the brands of Cannon, VEAM and BIW Connector Systems.
Continuous investment in technology and research & development have enabled ITT to provide new,
innovative products and solutions to markets including:
2
www.ittcannon.com
lndustrial / lnstrumentation
Transportation
Defense Vehicles
Oil & Gas
Automotive
Commercial & Military Aerospace
Our connector portfolio
remains the most extensive
in the industry, offering a reliable and
cost effective range of interconnect
solutions
Computer, Telecom &
Consumer Electronics
www.ittcannon.com
3
Introduction to KPSE /KPT /KPTC
ITT Cannon's miniature circular connector series KPT, KPSE and KPTC
conform to meet the performance specification to MIL-C-26482 with a
positive three point bayonet coupling, five-keyway polarization and high
insert arrangement contact density.
Purpose
• General purpose solder connectors (KPT)
– Our solution for small / prototype quantities
using solder type contacts
• High versatility general purpose versions using
crimp or solder contacts (KPTC)
– Our commercial version for higher volume production
with option for solder contacts
• High performance crimp connectors (KPSE)
– Our solution for volume production optimized for fast
assembly featuring “clip-in” contact & insulator design
• Military approved versions according to VG95328
or MIL-C-26482
The broad product range provides the most complete family
of connectors conforming to VG95328 and MIL-C-26482
specifications.
Highlights
• All connectors conforming to the above mentioned standards
are fully intermateable and accept a wide range of interchange-
able accessories.
• Design modifications can be achieved easily and a lower
cost using Cannons KPSE / KPT or KPTC versions
• VG95328 versions are based on MIL-C-26482 but comply
to ECC directives and offer additional shielded versions
• KPTC is based on MIL-C-26482 but offers a greater versatility
in contacts, backshells and plating options
• “Blue Generation” RoHS compliant, 500 hours salt spray and
conductive plating is offered next to the standard Nickel,
Zinc Cobalt or Cadmium platings.
Contact us for detail or your request
for a customized solution.
Dimensions shown in mm | Specifications and dimensions subject to change
4
www.ittcannon.com
Product overview
KPT
Material and Finishes
Shell
Insulator
Grommet and seal
Contacts
Mechanical Data
00 – Wall mounting receptacle
Shell styles
01 – Cable connecting plug
02 – Box mounting receptacle
06 – Straight plug
Shell size
Polarization / Coupling
8 through 24
Five keyways / 3-point bayonet
A – General duty
Service classes
E – Grommet seal
F – Grommet seal with strain relief
PG – PG gland adapters
ME – metric gland adapters
Environmental sealing
Operating temperature
Durability
Vibration
Electrical Data
Number of contacts
Wire size AWG
Contact termination
2 through 61
16 through 24
Solder
KPT /KPSE /KPTC
Contact rating
Size
20
16
Insulation resistance
Exceptions
Service rating between
the central contact and
the housing of the
coaxial contact
~ 5000 MΩ
Test voltage
Seal Level
21336 m / 70 000 ft.
Service class
1
2
1
2
Service class
1
2
Operating voltage
VG95328
140 VDC/100 VAC
165 VDC/115 VAC
MIL-C-26482
850 VDC/600 VAC
1400 VDC/1000 VAC
Vrms
1500
2300
375
550
VDC
2100
3200
535
770
Rated current A
7,5
13,0
Test current A
7,5
13,0
Millivolt drop mV
Less than 55
Less than 50
3 through 61
12 through 24
Crimp
2 through 61
0,4 – 2,0 mm²
Crimp, solder
According to VG95319 Part 2, Test No. 5.9.2 | For styles A to E and Z1, Z2 and Z3 and gaskets style A only,
test pressure 0,2 bar overpressure, test duration 48 h, test temperature 25 ±3°C, connector shall be free of moisture
–55 / +125°C
500 mating cycles
200 m/s² at 10 to 2000 Hz
07 – Jam nut receptacle
08 – Plug with 90° termination assemblies
B – Thru-bulkhead receptacle (KPT only)
Aluminum alloy
Aluminum alloy
Aluminum alloy
Various RoHS compliant plating options are available like Zinc cobalt, Zinc Nickel and Nickel plus none compliant Cadmium
Polychloroprene
Polychloroprene
Copper alloy, gold and tin plated
Polychloroprene
Polychloroprene
Copper alloy, gold and tin plated
Polychloroprene
Polychloroprene
Copper alloy, hard gold and tin plated
KPSE
KPTC
Operating voltage
(with scoop proof connectors operating voltages acc. to MIL-C-26482 and VG95328 are permitted)
When the connectors in this catalogue are used for voltages
greater than 50 Volts and have touchable conductive shell parts
they must be used in accordance with the safety
regulations DIN VDE Part 140; IEC 60364-4-41. This regulation
basically dictates that the power source should be turned off
before any mating and unmating of the connector. This regula-
tion does not provide protection against electrical shock when
mating and unmating the connectors in the live condition.
Dimensions shown in mm | Specifications and dimensions subject to change
www.ittcannon.com
5
NXP MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
