The properly and electrostatically measured taping materials are used for the components, but attention should be paid to the fact that there is some danger the parts absorb on the top
tapes to cause a failure in the mounting and the parts are destructed by static electricity (more than 1kV : 1J, 2A, 2B, 2E 0.5kV : 1E, Human Body Model 100pF 1.5kΩ) to change the
resistance in the conditions of an excessive dryness or after the parts are given vibration for a long time as they are packaged on the tapes. Similarly, care should be given not to apply the
excessive static electricity when mounting on the boards.
●
Ionic impurities such as flux etc. that are attached to these products or those mounted onto a PCB, negatively affect their moisture resistance, corrosion resistance, etc. The flux may
contain ionic substances like chlorine, acid, etc. while perspiration and saliva include ionic impurities like sodium (Na
＋
), chrorine (Cl
−
) etc. Therefore these kinds of ionic substances may
induce electrical corrosion when they invade into the products. Either thorough washing or using RMA solder and flux are necessary since lead free solder contains ionic substances.
Washing process is needed, before putting on moisture proof material in order to prevent electrical corrosion.
●
Please pay attention that the top of an iron does not direct touch to the components. There is a risk that may cause a change in resistance. Take care that another risk may happen that
the protecting coat is carbonized in an instant when touched directly by the top of the iron, also climatic-proof for electric corrosion or insulation of protecting coat may be dropped down.
Be sure not to give high temperature on the top of the iron as it will degrade the protecting coat.
●
Avoid storing components under direct sun rays, high temperature/humidity. Direct sun rays will cause quality change of taping and difficulty of keeping appropriate peeling strength. 5∼
35℃/35∼75%RH, there is no deterioration of solderability for 12 months, but take special care for storing, because condensation, dust, and toxic gas like hydrogen sulfide, sulfurous acid
gas, hydrogen chloride, etc. may drop solderability.
德国硅晶圆大厂Siltronic AG 4月25日公布2018年第1季(截至3月31日为止)财报：营收年增26.9%(季减0.2%)至3.274亿欧元；毛利率自1年前的23.0%升至38.1%；EBITDA(税前、息前、折旧摊提前盈余)年增131%至1.223亿欧元；EBITDA率报37.4%、优于一年前的20.5%以及2017年第4季的36.8%。 Siltronic指出，2017年第1季...[详细]
根据DIGITIMES Research观察，目前已量产的微型显示技术包括基于水晶玻璃的HTPS TFT LCD、基于硅晶圆的DLP与LCoS以及AMOLED on Silicon等，最初系应用于投影技术，经过数年商品化验证，AMOLED on Silicon已被证明最适用于AR眼镜，并已有商品问世。不过，由于OLED技术有发光效率、操作温度范围以及寿命等主要缺点，长期来看，无机的Micro L...[详细]
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
