Datasheet> 器件分类 > 无源元件> 电容器> C1210Q430G2GAL7800

文档预览

C1210Q430G2GAL7800: 产品描述Ceramic Capacitor, Multilayer, Ceramic, 200V, 2% +Tol, 2% -Tol, BP, -/+30ppm/Cel TC, 0.000043uF, 1210,; 产品类别无源元件电容器; 文件大小160KB，共8页; 制造商KEMET(基美); 官网地址http://www.kemet.com

下载文档详细参数全文预览

C1210Q430G2GAL7800概述

Ceramic Capacitor, Multilayer, Ceramic, 200V, 2% +Tol, 2% -Tol, BP, -/+30ppm/Cel TC, 0.000043uF, 1210,

C1210Q430G2GAL7800规格参数

参数名称	属性值
是否Rohs认证	不符合
Objectid	926603997
包装说明	, 1210
Reach Compliance Code	not_compliant
ECCN代码	EAR99
YTEOL	7.8
电容	0.000043 µF
电容器类型	CERAMIC CAPACITOR
介电材料	CERAMIC
高度	1.6 mm
JESD-609代码	e0
长度	3.07 mm
多层	Yes
负容差	2%
端子数量	2
最高工作温度	125 °C
最低工作温度	-55 °C
封装形式	SMT
包装方法	TR, Plastic, 7 Inch
正容差	2%
额定（直流）电压（URdc）	200 V
尺寸代码	1210
温度特性代码	BP
温度系数	30ppm/Cel ppm/°C
端子面层	Tin/Lead (Sn70Pb30) - with Nickel (Ni) barrier
宽度	2.56 mm

文档预览

下载PDF文档

全文
预览

CERAMIC HIGH RELIABILITY

GENERAL INFORMATION GR900 SERIES

HIGH RELIABILITY — GR900

GR900 capacitors are intended for use in any application where

the chance of failure must be reduced to the lowest possible

level. While any well-made multilayer ceramic capacitor is an

inherently reliable device, GR900 capacitors receive special

attention in all phases of manufacture including:

— Raw Materials Selection

— Special Designs

— Clean Room Production

— Individual Batch Testing

— C-SAM (when applicable)

— Singular Batch Identity is Maintained

— Destructive Physical Analysis

These parts are well worth the added investment in comparison

to the cost of a device or system failure.

Typical applications include:

Medical, Aerospace, Communication Satellites, Radar, Guidance

Systems.

SCREENING AND SAMPLE TESTS

Each batch receives the following testing/inspections:

Preliminary:

1. Destructive Physical Analysis: (DPA) - A sample is pulled from

each lot and examined per EIA-469 and KEMET’s strict internal

void and delamination criteria. Sampling plan is per MIL-PRF-123.

2. C-SAM - May be performed on batches failing to meet the

DPA criteria for removal of marginal product. Not required on

each lot.

Group A

1. Thermal Shock

— Materials used in the construction of mul-

tilayer ceramic capacitors possess various thermal coefficients of

expansion. To assure maximum uniformity, each part is temper-

ature cycled in accordance to MIL-STD-202, Method 107,

Condition A with Step 3 being 125°C. Number of cycles shall be

20 (100% of lot).

2. Voltage Conditioning

— One of the most strenuous environ-

ments for any capacitor is the high temperature/high voltage test.

All units are subject to twice-rated voltage to the units at the max-

imum rated temperature of 125°C for a minimum of 168 hours

and a maximum of 264 hours. The voltage conditioning may be

terminated at any time during 168 hours to 264 hours time inter-

val that confirmed failures meet the requirements of the PDA dur-

ing the last 48 hours of 1 unit or .4% (100% of lot).

Optional Voltage Conditioning (Accelerated Voltage

Conditioning)

— All conditions of the standard voltage condi-

tioning apply with the exception of increased voltage and

decreased test time. Refer to MIL-PRF-123 for the proper formula.

*Step 5 is performed on chips at this point (100% of lot).

3. Dielectric Withstanding Voltage

— 250% of the dc rated volt-

age at 25°C (100% of lot).

4. Insulation Resistance

— The 25°C measurement with rated

voltage applied shall be the lesser of 100 GΩ or 1000 megohm-

microfarads (100% of lot).

*5. Insulation Resistance

— The 125°C measurement with

rated voltage applied shall be the lesser of 10 GΩ or 100

megohm-microfarads (100% of lot). For chips, 125°C IR is per-

formed prior to Step 3 above.

6. Storage

at 150°C for 2 hours minimum without voltage applied

followed by a 12-hour minimum stabilization period (temperature

characteristic BX only).

7. Capacitance

— Shall be within specified tolerance at 25°C

(100% of lot). (Aging phenomenon is taken into account for BX

dielectric to obtain capacitance.)

8. Dissipation Factor

— Shall not exceed 2.5% for X7R (BX)

dielectric, 0.15% for C0G (BP) dielectric at 25°C. (100% of lot.)

9. Percent Defective Allowable (PDA)

— The overall PDA is 8%

for parts outside the MIL-PRF-123 values. The PDA is per MIL-

PRF-123 for all parts that are valid MIL-PRF-123 values. The PD

includes steps 1 through 8 above with the following exceptions.

Capacitance exclusion - capacitance values no more than 5% or

.5pF, whichever is greater for BX characteristic or 1% or .3pF,

whichever is greater for BP characteristic beyond specified toler-

ance limit, shall be removed from the lot but shall not be consid-

ered defective for determination of the PD.

Insulation Resistance at 25°C — Product which is not acceptable

for twice the military limit but is acceptable per the military limit,

is removed from the lot but shall not be considered defective for

determination of the PD.

10. Visual and Mechanical Examination

— Performed per MIL-

PRF-123 criteria.

11. Radiographic Examination (Leaded Devices Only)

—

Radial devices receive a one-plane X-ray.

12. Destructive Physical Analysis (DPA)

— A sample is exam-

ined on each lot per EIA-469. Sampling Plan is per MIL-PRF-123.

STANDARD PACKAGING

All products are packaged in trays except C512 capacitors which

are packaged 1 piece per bag.

DATA PACKAGE

A data package is sent with each shipment which contains:

Final Destructive Physical Analysis (DPA) report.

Certificate of Compliance stating that the parts meet all applic-

able requirements of the appropriate military specification to the

best failure level to which KEMET is approved.

Summary of Group A Testing.

推荐资源

怎样在模拟器中配置蓝牙呢: 电脑上装有USB蓝牙适配器，但是模拟器中提示没有蓝牙设备，要怎样配置才能让模拟器发现电脑上的蓝牙适配器，并且通过蓝牙发送文件呢，谢谢...; klgmvidob 嵌入式系统

360致网民的紧急求助信：反抗QQ霸权，需要你的力量！: 各位亲爱的朋友：　　您好！　　首先感谢您在百忙之中阅读这封360公司发来的紧急求援信，然后恳请您耐心的读完，并给予我们您的声援。360在您的支持下成长起来，这是360生死存亡的紧急关头，也 ......; mytubaobao 聊聊、笑笑、闹闹

键盘抖动问题: for (;;) { dwVal = rINTPND; if ((dwVal & MASK_BIT(21)) == 0) { continue; } //EXTINTPND 寄存器，判断是哪个外部中断触发 dwVal = rEXT ......; smjacky 嵌入式系统

倍加福Lin接口传感器急求~~: 我有个倍加福的传感器（附件1）是LIN接口。买了个魔帆电子的232-LIN转换器（附件2），想通过串口对传感器调试。转换器的手册里写到根据串口转LIN通信协议，报文格式如下。我从电脑串口发送握手 ......; AvrilSHE 汽车电子

【懒人自理鱼缸控制系统】BLE_MESH 鱼缸灯外围的制作: 【懒人自理鱼缸控制系统】BLE_MESH 鱼缸灯外围的制作今天把鱼缸灯包装一下 1、用深色有机玻璃板做侧板，加上防水接头 550209 2、透明有机玻璃做面板 550210 3、4mm 的304棍 ......; 蓝雨夜物联网大赛方案集锦

这里的几个函数都是什么意思啊？？: 大家好！！我用的开发板是英飞凌的XC2765，想要调试SPI 配置DAvE的时候遇到了几个问题。。。。下图中第一个和第三个分别是：发送和接收数据的函数，第二个片选函数是什么意思啊？？后两 ......; 1157421908 单片机

器件捷径: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

热门器件

开源项目推荐更多

热门活动更多

热门文章更多

技术资料推荐更多