FemtoClock™ SAS/SATA Clock Generator
ICS844441I
PRELIMINARY DATA SHEET
General Description
The ICS844441I is a low jitter, high performance clock
generator and a member of the FemtoClock™ family
HiPerClockS™
of silicon timing products. The ICS844441I is designed
for use in applications using the SAS and SATA
interconnect. The ICS844441I uses an external,
25MHz, parallel resonant crystal to generate four selectable output
frequencies: 75MHz, 100MHz, 150MHz, and 300MHz. This silicon
based approach provides excellent frequency stability and reliability.
The ICS844441I features down and center spread spectrum (SSC)
clocking techniques.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
Designed for use in SAS, SAS-2, and SATA systems
Center (±0.25%) Spread Spectrum Clocking (SSC)
Down (-0.23% or -0.5%) SSC
Better frequency stability than SAW oscillators
One differential 2.5V LVDS output
Crystal oscillator interface designed for 25MHz
(C
L
= 18pF) frequency
External fundamental crystal frequency ensures high reliability
and low aging
Selectable output frequencies: 75MHz, 100MHz, 150MHz,
300MHz
Output frequency is tunable with external capacitors
RMS phase jitter @ 100MHz, using a 25MHz crystal
(12kHz – 20MHz): 1.1936ps (typical)
2.5V operating supply
-40°C to 85°C ambient operating temperature
Available in lead-free (RoHS 6) packages
ICS
Applications
•
•
•
•
•
•
•
SAS/SATA Host Bus Adapters
SATA Port Multipliers
SAS I/O Controllers
TapeDrive and HDD Array Controllers
SAS Edge and Fanout Expanders
HDDs and TapeDrives
Disk Storage Enterprise
Pin Assignment
Block Diagrams
XTAL_IN
XTAL_OUT
XTAL_IN
SSC_SEL0
SSC_SEL1
1
2
3
4
8
7
6
5
GND
nQ
Q
V
DD
25MHz
XTAL
XTAL_OUT
OSC
FemtoClock™
PLL
00 = SSC Off
01 = 0.5% Down-spread
10 = 0.23% Down-spread
11 = 0.5% Center-spread
Q
nQ
SSC_SEL(1:0)
Pulldown:Pulldown
SSC Output
Control Logic
8-Lead SOIC
ICS844441I
8-Lead SOIC, 150 mil
3.90mm x 4.90mm x 1.375mm package body
M Package
Top View
GND
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
F_SEL1
GND
nPLL_SEL
nQ
Q
V
DD
F_SEL0
V
DD
nPLL_SEL
Pulldown
XTAL_IN
25MHz
XTAL
XTAL_OUT
OSC
FemtoClock™
PLL
0
1
00 = 75MHz
01 = 100MHz
10 = 150MHz
(default)
11 = 300MHz
Q
nQ
XTAL_OUT
XTAL_IN
SSC_SEL0
nc
nc
nc
SSC_SEL1
F_SEL(1:0)
SSC_SEL(1:0)
Pullup:Pulldown
Pulldown:Pulldown
Clock Output
Control Logic
16-Lead TSSOP
ICS844441I
16-Lead TSSOP
4.4mm x 5.0mm x 0.925mm package body
G Package
Top View
The Preliminary Information presented herein represents a product in pre-production. The noted characteristics are based on initial product characterization
and/or qualification. Integrated Device Technology, Incorporated (IDT) reserves the right to change any circuitry or specifications without notice.
ICS844441DGI REVISION B OCTOBER 13, 2009
1
©2009 Integrated Device Technology, Inc.
ICS844441I Preliminary Data Sheet
FEMTOCLOCK™ SAS/SATA CLOCK GENERATOR
Table 1. Pin Descriptions
Name
XTAL_OUT,
XTAL_IN
SSC_SEL0,
SSC_SEL1
F_SEL0
F_SEL1
nPLL_SEL
Q, nQ
GND
V
DD
nc
Input
Input
Input
Input
Input
Output
Power
Power
Unused
Pulldown
Pulldown
Pullup
Pulldown
Type
Description
Crystal oscillator interface. XTAL_IN is the input, XTAL_OUT is the output.
SSC select pins. See Table 3A. LVCMOS/LVTTL interface levels.
Output frequency select pin. See Table 3B. LVCMOS/LVTTL interface levels.
Output frequency select pin. See Table 3B. LVCMOS/LVTTL interface levels.
PLL Bypass pin. LVCMOS/LVTTL interface levels.
Differential clock outputs. LVDS interface levels.
Power supply ground.
Power supply pin.
No connect.
NOTE:
Pullup/Pulldown
refers to internal input resistors. See Table 2,
Pin Characteristics,
for typical values.
Table 2. Pin Characteristics
Symbol
C
IN
R
PULLDOWN
R
PULLUP
Parameter
Input Capacitance
Input Pulldown Resistor
Input Pullup Resistor
Test Conditions
Minimum
Typical
4
51
51
Maximum
Units
pF
k
Ω
k
Ω
Function Tables
Table 3A. SSC_SEL[1:0] Function Table
Inputs
SSC_SEL1
0 (default)
0
1
1
SSC_SEL0
0 (default)
1
0
1
Mode
SSC Off
0.5% Down-spread
0.23% Down-spread
0.5% Center-spread
F_SEL1
0
0
1 (default)
1
Table 3B. F_SEL[1:0] Function Table
Inputs
F_SEL0
0
1
0 (default)
1
Output Frequency
(MHz)
75
100
150
300
ICS844441DGI REVISION B OCTOBER 13, 2009
2
©2009 Integrated Device Technology, Inc.
ICS844441I Preliminary Data Sheet
FEMTOCLOCK™ SAS/SATA CLOCK GENERATOR
Absolute Maximum Ratings
NOTE: Stresses beyond those listed under
Absolute Maximum Ratings
may cause permanent damage to the device.
These ratings are stress specifications only. Functional operation of product at these conditions or any conditions beyond
those listed in the
DC Characteristics or AC Characteristics
is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect product reliability.
Item
Supply Voltage, V
DD
Inputs, V
I
Outputs, I
O
Continuous Current
Surge Current
Package Thermal Impedance,
θ
JA
16 Lead TSSOP
8 Lead SOIC
Storage Temperature, T
STG
Rating
4.6V
-0.5V to V
DD
+ 0.5V
10mA
15mA
92.4°C/W (0 mps)
96.0°C/W (0 lfpm)
-65°C to 150°C
DC Electrical Characteristics
Table 4A. Power Supply DC Characteristics,
V
DD
= 2.5V ± 5%, T
A
= -40°C to 85°C
Symbol
V
DD
I
DD
Parameter
Power Supply Voltage
Power Supply Current
Test Conditions
Minimum
2.375
Typical
2.5
45
Maximum
2.625
Units
V
mA
Table 4B. LVCMOS/LVTTL DC Characteristics,V
DD
= 2.5V ± 5%, T
A
= -40°C to 85°C
Symbol
V
IH
V
IL
I
IH
Parameter
Input High Voltage
Input Low Voltage
F_SEL1
Input
High Current
SSC_SEL[0:1],
F_SEL0, nPLL_SEL
F_SEL1
I
IL
Input
Low Current
SSC_SEL[0:1],
F_SEL0, nPLL_SEL
V
DD
= V
IN
= 2.5V
V
DD
= V
IN
= 2.5V
V
DD
= 2.5V, V
IN
= 0V
V
DD
= 2.5V, V
IN
= 0V
-150
-5
Test Conditions
Minimum
1.7
-0.3
Typical
Maximum
V
DD
+ 0.3
0.7
5
150
Units
V
V
µA
µA
µA
µA
Table 4C. LVDS DC Characteristics,
V
DD
= 2.5V ± 5%, T
A
= -40°C to 85°C
Symbol
V
OD
∆V
OD
V
OS
∆V
OS
Parameter
Differential Output Voltage
V
OD
Magnitude Change
Offset Voltage
V
OS
Magnitude Change
1.25
50
Test Conditions
Minimum
Typical
350
50
Maximum
Units
mV
mV
V
mV
ICS844441DGI REVISION B OCTOBER 13, 2009
3
©2009 Integrated Device Technology, Inc.
ICS844441I Preliminary Data Sheet
FEMTOCLOCK™ SAS/SATA CLOCK GENERATOR
Table 4D. Crystal Characteristics
Parameter
Mode of Oscillation
Frequency
Equivalent Series Resistance (ESR)
Shunt Capacitance
Test Conditions
Minimum
Typical
Fundamental
25
50
7
MHz
Ohm
pF
Maximum
Units
AC Electrical Characteristics
Table 5. AC Characteristics,
V
DD
= 2.5V ± 5%, T
A
= -40°C to 85°C
Symbol
Parameter
Test Conditions
F_SEL(1:0) = 00
f
OUT
Output Frequency
F_SEL(1:0) = 01
F_SEL(1:0) = 10
F_SEL(1:0) = 11
75MHz,
Integration Range: 12kHz – 20MHz
RMS Phase Jitter
(Random); NOTE 1
100MHz,
Integration Range: 12kHz – 20MHz
150MHz,
Integration Range: 12kHz – 20MHz
300MHz,
Integration Range: 12kHz – 20MHz
t
R
/ t
F
odc
Output Rise/Fall Time
Output Duty Cycle
20% to 80%
Minimum
Typical
75
100
150
300
1.19602
1.1936
1.22743
1.15011
400
50
Maximum
Units
MHz
MHz
MHz
MHz
ps
ps
ps
ps
ps
%
tjit(Ø)
NOTE: Electrical parameters are guaranteed over the specified ambient operating temperature range, which is established when the device is
mounted in a test socket with maintained transverse airflow greater than 500 lfpm. The device will meet specifications after thermal equilibrium
has been reached under these conditions.
NOTE: Using a 25MHz, 18pF quartz crystal.
NOTE 1: Please refer to the Phase Noise plot.
ICS844441DGI REVISION B OCTOBER 13, 2009
4
©2009 Integrated Device Technology, Inc.
ICS844441I Preliminary Data Sheet
FEMTOCLOCK™ SAS/SATA CLOCK GENERATOR
Typical Phase Noise at 100MHz
Noise Power
dBc
Hz
Offset Frequency (Hz)
ICS844441DGI REVISION B OCTOBER 13, 2009
5
©2009 Integrated Device Technology, Inc.
工作这点儿事
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
