The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Staggered Connector Directly Mounted on Board
HIF2C Series
■
Features
1. Directly Mounted on Board
This connector can be directly mounted on the board
using 1.27mm pitch flat cable.
2. Variation in Number of Contacts
The number of contacts contains 10, 16, 20, 26, 30, 34,
40, 50, and 60 contacts.
3. Low Profile Type
The connector height is lower than that of the HIF2E series.
4. Applicable Cable
The applicable cable is UL2651 AWG
#
28 flat cable (7
cores./0.127mm, jacket dia. :0.8 to 1.0mm).
■
Applications
■
Product Specifications
Rating
Item
1. Insulation Resistance 1000M
ohms
min.
2. Withstanding voltage
No flashover or insulation breakdown.
3. Contact Resistance 15m
ohms
max.
4. Vibration
Current rating: 1A
Voltage rating: 200V AC
Specification
Computers, terminal equipment, PPC, various kinds of electronic equipment, business machines, etc.
Operating Temperature Range:–55 to
+85ç
(Note 1)
Operating Moisture Range:40 to 80%
Storage Temperature Range:–10 to
+60ç(Note
2)
Storage Humidity Range:40 to 70% (Note 2)
Condition
500V DC
650V AC/1 minute
0.1A
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(–65ç: 30 minutes
➝15
to 35ç: 5 minutes max.
125ç: 30 minutes
➝15
to 35ç: 5 minutes max.) 5 cycles
5.
Humidity (Steady state)
Insulation resistance: 1000M
ohms
min.
6. Temperature Cycle
No damage, cracks, or parts looseness.
7. Resistance to
Soldering heat
No deformation of components affecting performance.
Solder Bath: 260ç for 10 seconds
Manual soldering: 360ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■
Material
Part
Insulator
Contact
Material
PBT
Beryllium copper
Contact area
Finish
Black
Gold plated over nickel underplated
Remarks
UL94V-0
---------------
■
Ordering Information
HIF2C
1
1
Series Name: HIF 2C
-
*
DT - 1.27 R
2
3
4
5
4
5
Contact Pitch: 1.27mm
Connection type : R : ribbon cable
2
Number of contacts: 10, 16, 20, 26, 30, 34, 40, 50, and 60
3
Contact alignment: DT : staggered
B65
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HIF2C Series●Staggered Connector Directly Mounted on Board
Part Number
CL No.
Number of Contacts
10
16
20
26
30
34
40
50
60
A
17.8
25.4
30.5
38.1
43.2
48.3
55.9
68.6
81.3
B
11.43
19.05
24.13
31.75
36.83
41.91
49.53
62.23
74.93
RoHS
HIF2C-10DT-1.27R(01) 561-0075-0-01
HIF2C-16DT-1.27R(01) 561-0077-6-01
HIF2C-20DT-1.27R(01) 561-0079-1-01
HIF2C-26DT-1.27R(01) 561-0081-3-01
HIF2C-30DT-1.27R(01) 561-0083-9-01
HIF2C-34DT-1.27R(01) 561-0085-4-01
HIF2C-40DT-1.27R(01) 561-0087-0-01
HIF2C-50DT-1.27R(01) 561-0089-5-01
HIF2C-60DT-1.27R(01) 561-0091-7-01
YES
B66
_pdf/pg_0001.png)
MicroPython开源版块
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界_pdf/1.png)
_pdf/2.png)
_pdf/3.png)
_pdf/4.png)
_pdf/pg_0002.png)
_pdf/pg_0003.png)
_pdf/pg_0004.png)
