Philips Semiconductors
Product data
80C51 8-bit Flash microcontroller family
16KB/32KB/64KB ISP/IAP Flash with 512B/1KB/2KB/8KB RAM
P89C660/P89C662/P89C664/
P89C668
DESCRIPTION
The P89C660/662/664/668 device contains a non-volatile
16KB/32KB/64KB Flash program memory that is both parallel
programmable and serial In-System and In-Application
Programmable. In-System Programming (ISP) allows the user to
download new code while the microcontroller sits in the application.
In-Application Programming (IAP) means that the microcontroller
fetches new program code and reprograms itself while in the
system. This allows for remote programming over a modem link.
A default serial loader (boot loader) program in ROM allows serial
In-System Programming of the Flash memory via the UART without
the need for a loader in the Flash code. For In-Application
Programming, the user program erases and reprograms the Flash
memory by use of standard routines contained in ROM.
This device executes one instruction in 6 clock cycles, hence
providing twice the speed of a conventional 80C51. An OTP
configuration bit gives the user the option to select conventional
12-clock timing.
This device is a Single-Chip 8-Bit Microcontroller manufactured in
advanced CMOS process and is a derivative of the 80C51
microcontroller family. The instruction set is 100% executing and
timing compatible with the 80C51 instruction set.
The device also has four 8-bit I/O ports, three 16-bit timer/event
counters, a multi-source, four-priority-level, nested interrupt
structure, an enhanced UART and on-chip oscillator and timing
circuits.
The added features of the P89C660/662/664/668 makes it a
powerful microcontroller for applications that require pulse width
modulation, high-speed I/O and up/down counting capabilities such
as motor control.
•
Can be programmed by the end-user application (IAP)
•
Parallel programming with 87C51 compatible hardware interface
to programmer
•
Six clocks per machine cycle operation (standard)
•
12 clocks per machine cycle operation (optional)
•
Speed up to 20 MHz with 6 clock cycles per machine cycle
(40 MHz equivalent performance); up to 33 MHz with 12 clocks
per machine cycle
•
Fully static operation
•
RAM externally expandable to 64 kbytes
•
Four interrupt priority levels
•
Eight interrupt sources
•
Four 8-bit I/O ports
•
Full-duplex enhanced UART
–
Framing error detection
–
Automatic address recognition
•
Power control modes
–
Clock can be stopped and resumed
–
Idle mode
–
Power-Down mode
FEATURES
•
80C51 Central Processing Unit
•
On-chip Flash program memory with In-System Programming
(ISP) and In-Application Programming (IAP) capability
•
Programmable clock out
•
Second DPTR register
•
Asynchronous port reset
•
Low EMI (inhibit ALE)
•
I
2
C serial interface
•
Programmable Counter Array (PCA)
–
PWM
–
Capture/compare
•
Boot ROM contains low level Flash programming routines for
downloading via the UART
•
Well-suited for IPMI applications
2002 Oct 28
2
853-2392 29118
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
