REJ09B0235-0110
32
32185/32186
Group
Hardware Manual
RENESAS MCU
M32R FAMILY / M32R/ECU SERIES
All information contained in these materials, including products and product specifications,
represents information on the product at the time of publication and is subject to change by
Renesas Technology Corp. without notice. Please review the latest information published
by Renesas Technology Corp. through various means, including the Renesas Technology
Corp. website (http://www.renesas.com).
Rev. 1.10
Revision date: May 15, 2007
www.renesas.com
Notes regarding these materials
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate
Renesas products for their use. Renesas neither makes warranties or representations with respect to the
accuracy or completeness of the information contained in this document nor grants any license to any
intellectual property rights or any other rights of Renesas or any third party with respect to the information in
this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising
out of the use of any information in this document, including, but not limited to, product data, diagrams, charts,
programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military
applications such as the development of weapons of mass destruction or for the purpose of any other military
use. When exporting the products or technology described herein, you should follow the applicable export
control laws and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and
application circuit examples, is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas products listed in this
document, please confirm the latest product information with a Renesas sales office. Also, please pay regular
and careful attention to additional and different information to be disclosed by Renesas such as that disclosed
through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas
assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information
included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in
light of the total system before deciding about the applicability of such information to the intended application.
Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any
particular application and specifically disclaims any liability arising out of the application and use of the
information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas
products are not designed, manufactured or tested for applications or otherwise in systems the failure or
malfunction of which may cause a direct threat to human life or create a risk of human injury or which require
especially high quality and reliability such as safety systems, or equipment or systems for transportation and
traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication
transmission. If you are considering the use of our products for such purposes, please contact a Renesas
sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who
elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas
Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect
to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or
damages arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific
characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use
conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and
injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for
hardware and software including but not limited to redundancy, fire control and malfunction prevention,
appropriate treatment for aging degradation or any other applicable measures. Among others, since the
evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or
system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas
products are attached or affixed, the risk of accident such as swallowing by infants and small children is very
high. You should implement safety measures so that Renesas products may not be easily detached from your
products. Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written
approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this
document, Renesas semiconductor products, or if you have any other inquiries.
General Precautions in the Handling of MPU/MCU Products
The following usage notes are applicable to all MPU/MCU products from Renesas. For detailed usage notes
on the products covered by this manual, refer to the relevant sections of the manual. If the descriptions under
General Precautions in the Handling of MPU/MCU Products and in the body of the manual differ from each
other, the description in the body of the manual takes precedence.
1. Handling of Unused Pins
Handle unused pins in accord with the directions given under Handling of Unused Pins in the
manual.
The input pins of CMOS products are generally in the high-impedance state. In operation
with an unused pin in the open-circuit state, extra electromagnetic noise is induced in the
vicinity of LSI, an associated shoot-through current flows internally, and malfunctions occur
due to the false recognition of the pin state as an input signal become possible. Unused
pins should be handled as described under Handling of Unused Pins in the manual.
2. Processing at Power-on
The state of the product is undefined at the moment when power is supplied.
The states of internal circuits in the LSI are indeterminate and the states of register
settings and pins are undefined at the moment when power is supplied.
In a finished product where the reset signal is applied to the external reset pin, the states
of pins are not guaranteed from the moment when power is supplied until the reset
process is completed.
In a similar way, the states of pins in a product that is reset by an on-chip power-on reset
function are not guaranteed from the moment when power is supplied until the power
reaches the level at which resetting has been specified.
3. Prohibition of Access to Reserved Addresses
Access to reserved addresses is prohibited.
The reserved addresses are provided for the possible future expansion of functions. Do
not access these addresses; the correct operation of LSI is not guaranteed if they are
accessed.
4. Clock Signals
After applying a reset, only release the reset line after the operating clock signal has become
stable. When switching the clock signal during program execution, wait until the target clock
signal has stabilized.
When the clock signal is generated with an external resonator (or from an external
oscillator) during a reset, ensure that the reset line is only released after full stabilization of
the clock signal. Moreover, when switching to a clock signal produced with an external
resonator (or by an external oscillator) while program execution is in progress, wait until
the target clock signal is stable.
5. Differences between Products
Before changing from one product to another, i.e. to one with a different part number, confirm
that the change will not lead to problems.
The characteristics of MPU/MCU in the same group but having different part numbers may
differ because of the differences in internal memory capacity and layout pattern. When
changing to products of different part numbers, implement a system-evaluation test for
each of the products.
REVISION HISTORY
Rev.
Date
Page
1.00 Dec 26, 2005
1.10 May 15, 2007
–
–
5-6
First edition issued
Add the 32185 Group
32185/32186 Group Hardware Manual
Description
Summary
Correct notes of IMASK register
Incorrect) the Interrupt Request Mask Register (IMASK) in the EIT
handler
→
Correct) the Interrupt Request Mask Register (IMASK)
6-15
6-16
6-17
6-19, 20
6-34
8-39
8-40
8-41
8-42
8-44
Add a description for FAENS
Add descriptions for ERASE bit and WRERR bit
Add a description for FENTRY bit
Correct descriptions of FCNT3 Register
Add Figure 6.6.7
Replace Figure 8.7.1
Replace Figure 8.7.2
Replace Figure 8.7.3
Replace Figure 8.7.4
Add a note about the peripheral function input when it is set to the
general-purpose port.
10-114, 176 Add descriptions to Reload register updates timing of PWM period
12-22, 23 Add descriptions to OVR bit, PTY bit, and FLM bit
12-45, 62 Add a note about switching from general-purpose port to serial interface pin
13-27
13-31
20-2
20-3
Chap.23
Add a description to RBO bit
Add a description to CRS bit
Correct Figure 20.1.1
Correct the description of XIN Oscillation Stoppage Detection Circuit
Add electrical characteristics of the 32185
Appendix 4 Add correction of notes
(REVISION
HISTORY-1)
Before Use
• Guide to Understanding the Register Table
(1) Bit number: Indicates a register’s bit number.
(2) Register border: The registers enclosed with thick border lines must be accessed in halfwords or words.
(3) Status after reset: The initial state of each register after reset is indicated in hexadecimal or binary.
(4) Status after reset: The initial state of each register after reset is indicated bitwise.
0: This bit is “0” after reset.
1: This bit is “1” after reset.
?: This bit is undefined after reset.
(5) The shaded bits mean that they have no functions assigned.
(6) Read conditions:
R: This bit can be accessed for read.
?: The value read from this bit is undefined. (Reading this bit has no effect.)
0: The value read from this bit is always “0.”
1: The value read from this bit is always “1.”
(7) Write conditions:
W: This bit can be accessed for write.
N: This bit is write protected.
0: To write to this bit, always write “0.”
1: To write to this bit, always write “1.”
–: Writing to this bit has no effect. (It does not matter whether this bit is set to “0” or “1” by writing in software.)
Note: Care must be taken when writing to this bit. See Note in each register table.
(1)
XXXRegister(XXX)
<Address: H’XXXX XXXX>
(5)
b0
AAA
0
1
BBB
0
2
CCC
0
3
0
4
0
5
0
6
0
7
0
8
0
9
0
10
0
11
0
12
0
13
0
14
0
b15
0
(2)
(4)
(3)
b
0
1
2
3–15
Bit name
AAA
• • •
• • •
• • •
<After reset: H’0000>
R
W
W
W
Function
bit
bit
bit
0:
1:
0:
1:
0:
1:
• • •
• • •
• • •
• • •
• • •
• • •
bit
bit
bit
bit
bit
bit
R
R
BBB
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
CCC
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
R (Note 1)
0
0
No function assigned. Fix to “0.”
Note 1: Only writing “0” is effective. Writing “1” has no effect, in which case the bit retains the value it had before the write.
(6) (7)
• Notation of “L” (signals)
The symbol “#” suffixed to the pin (or signal) names means that the pins (or signals) are “L.”
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
