®
HIGH CURRENT 1
Power Inductors
Description
• Designed for high current, low voltage applications
• Low DCR, high efficiency
• Foil construction for higher frequency circuit designs
• Suited for IR and vapor reflow solder
• Frequency range 1kHz to 1MHz
Applications
• Next generation microprocessors
• High current DC-DC converters
• Computers
Environmental Data
• Storage temperature range: -40C to +125C
• Operating ambient temperature range: -40C to +85C
(range is application specific).
• Infrared reflow temperature: +260C for 10 seconds
maximum
Part
Number
HC1-R22
HC1-R30
HC1-R57
HC1-R87
HC1-1R0
HC1-1R7
HC1-2R3
HC1-3R6
HC1-5R1
HC1-7R8
HC1-100
Rated
Inductance
µH
0.22
0.30
0.57
0.87
1.0
1.7
2.3
3.6
5.1
7.8
10
OCL (1)
± 15%
µH
0.218
0.291
0.572
0.866
1.12
1.66
2.29
3.59
5.15
7.85
10.5
Irms (2)
Amperes
(Approx.)
51.42
51.42
37.83
28.01
28.01
22.30
22.30
16.76
12.79
12.79
12.79
Packaging
• Supplied in tape and reel packaging, 250 per reel
Isat (3)
Amperes
(Approx.)
40.5
31.8
33.4
31.0
25.4
22.2
16.7
13.4
11.2
6.7
5.3
DCR (Ω)
Max. @
20°C
0.00034
0.00034
0.00063
0.00138
0.00138
0.0018
0.0018
0.0032
0.0054
0.0054
0.0054
Volt-µSec (4)
(VµS)
(ref.)
1.83
1.83
3.66
5.49
5.49
7.33
7.33
9.16
10.99
10.99
10.99
1) OCL (Open Circuit Inductance) Test parameters: 300KHz, .25Vrms,
0.0Adc & Isat.
2) Irms Amperes for approximately
∆T
of 40°C. DC current for an approximate
∆T
of
40°C without core loss. Derating is necessary for AC currents. It is recommended
that the temperature of the part not exceed 125°C under worst case operating
conditions verified in the end application.
3) Isat Amperes Peak for approximately 30% rolloff @ 20°C
4) Applied Volt-Time product (V-µS) across the inductor. This value represents the
applied V-µS at 200kHz necessary to generate a core loss equal to 10% of the
total losses for 40°C temperature rise. See Core Loss Graph.
Units supplied in tape & reel packaging; 250 parts on 13" diameter reel.
Mechanical Diagrams
Dimensions in Millimeters
®
HIGH CURRENT 1
Power Inductors
Inductance vs. Idc
HC1 Inductor (R87)
HC1 Inductor (R22, 7R8)
100
100
90
90
Ldc/Lo (%)
Ldc/Lo (%)
80
80
70
70
60
60
50
0.00
0.40
Idc/Isat
0.80
1.20
50
0.00
0.40
Idc/Isat
0.80
1.20
HC1 Inductor (1R7)
HC1 Inductor (R57, 2R3, 3R6, 5R1)
100
100
90
90
Ldc/Lo (%)
80
Ldc/Lo (%)
80
70
70
60
60
50
0.00
0.40
Idc/Isat
0.80
1.20
50
0.00
0.40
Idc/Isat
0.80
1.20
HC1 Inductor (R30, 100)
HC1 Inductor (1R0)
100
100
90
90
Ldc/Lo (%)
Ldc/Lo (%)
80
80
70
70
60
60
50
0.00
0.40
Idc/Isat
0.80
1.20
50
0.00
0.40
Idc/Isat
0.80
1.20
PM-4113 1/05
© Cooper Electronic
Technologies 2005
Visit us on the Web at www.cooperET.com
3601 Quantum Boulevard Boynton Beach, Florida 33426-8638
Tel: +1-561-752-5000 Toll Free: +1-888-414-2645 Fax: +1-561-742-1178
This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic
Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper
Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been
selected, it should be tested by the user in all possible applications.
Life Support Policy: Cooper Electronic Technologies does not authorize the use of any of its products for use in life support devices or systems without the
express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when
properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
