MAALSS0044
Low Noise Amplifier
1.5 - 1.6 GHz
Features
•
•
•
•
•
•
•
•
•
•
•
Low Noise Figure: 1.55 dB
High Gain: 21 dB
Low Power Consumption: 3 to 5 V, 8 mA
High Dynamic Range
DC Decoupled RF Input and Output
No External RF Tuning Elements Necessary
Lead-Free SOIC-8 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MAAM12021
Rev. V1
Functional Block Diagram
GND
8
V
DD
7
RF OUT
6
GND
5
Description
M/A-COM’s MAALSS0044 is a high performance
GaAs MMIC low noise amplifier in a lead-free
SOIC-8 surface mount package. The MAALSS0044
employs a fully monolithic design which eliminates
the need for external tuning networks. It can be
biased using 3- or 5-volt supplies and has an option
for biasing at higher currents for increased dynamic
range.
The MAALSS0044 is ideally suited for use where
low noise figure, high gain, high dynamic range and
low power consumption are required.
Typical
applications include receiver front ends in the Global
Positioning System (GPS) and Japanese Personal
Digital Cellular (PDC-1500) markets, as well as
standard gain blocks, buffer amps, driver amps and
IF amps in both fixed and portable systems.
M/A-COM’s MAALSS0044 is fabricated using a
mature 0.5-micron gate length GaAs process. The
process features full passivation for increased
performance reliability.
1
GND
2
R1
(optional)
3
RF IN
4
GND
Pin Configuration
Pin No.
1
2
3
4
Function
Ground
R1 (Optional)
See Note 10
RF Input
Ground
Pin No.
5
6
7
8
Function
Ground
RF Output
V
DD
Ground
Absolute Maximum Ratings
3,4
Parameter
V
DD
Input Power
Current
5
Channel Temperature
6
Operating Temperature
Storage Temperature
Absolute Maximum
+10 VDC
+17 dBm
30 mA
+150°C
-40°C to +85°C
-65°C to +150°C
Ordering Information
1,2
Part Number
MAALSS0044
MAALSS0044TR-3000
MAALSS0044SMB
Package
Bulk Packaging
3000 piece reel
Sample Test Board
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
5. Only if pin 2 is used to increase current (see note 10.
6. Typical thermal resistance (θjc) = +165°C/W.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAALSS0044
Low Noise Amplifier
1.5 - 1.6 GHz
Electrical Specifications
7
: T
A
= 25°C, V
DD
= +5 V, Z
0
= 50
Ω
Parameter
Gain
Noise Figure
Input VSWR
Output VSWR
Output 1 dB Compression
Input IP3
Reverse Isolation
Bias Current
7. See plots for 3-volt performance.
Rev. V1
Test Conditions
1.5 - 1.6 GHz, P
IN
= -30 dBm
1.5 - 1.6 GHz
1.5 - 1.6 GHz, P
IN
= -30 dBm
1.5 - 1.6 GHz, P
IN
= -30 dBm
1.5 - 1.6 GHz
1.5 - 1.6 GHz, P
IN
= -30 dBm
1.5 - 1.6 GHz, P
IN
= -30 dBm
—
Units
dB
dB
Ratio
Ratio
dBm
dBm
dB
mA
Min.
19
—
—
—
—
—
—
5
Typ.
21
1.55
1.5:1
1.5:1
6
-2
40
8
Max.
23
1.9
—
—
—
—
—
11
Recommended PCB Configuration
Application Schematic
8,9,10
V
DD
L1
C1
RF IN
RF OUT
R1
(Optional)
See Note 8
8.
9.
Component List
Part
C1
L1
Value
500 pF
15 nH
Case Size
0603
0805
0603
Manufacturer
Murata
Coilcraft
Panasonic
R1 (optional) 35 to 40
Ω
Pins 1, 4, 5 and 8 must be RF and DC grounded as shown.
Pin 3 is the RF input; pin 6 is the RF output. V
DD
is
applied on pin 7. This pin must be bypassed with a 500 pF
surface mount MLC capacitor, mounted as close as
possible to pin 7, and RF decoupled with a chip inductor
having a minimum value of 15 nH (as shown in the
Recommended PCB Configuration).
10. Pin 2 allows use of an external resistor to ground for
optional, higher current bias. For nominal current
operation no resistor is used. For optional 20-mA current
operation, connect a 35 to 40
Ω
chip resistor (as shown in
the Recommended PCB Configuration).
2
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAALSS0044
Low Noise Amplifier
1.5 - 1.6 GHz
Typical Performance Curves
Gain @ +25°C
24
Rev. V1
Noise Figure @ +25°C
1.7
22
1.6
20
1.5
18
3 V, 8 mA
5 V, 8 mA
5 V, 20 mA
1.4
3 V, 8 mA
5 V, 8 mA
5 V, 20 mA
16
1.3
1.4
1.5
1.6
1.7
1.8
1.3
1.50
1.52
1.54
1.56
1.58
1.60
Frequency (GHz)
Frequency (GHz)
VSWR @ 5 V, 8 mA, +25°C
3.0
Input IP3 @ +25°C
3
2.5
INPUT
OUTPUT
0
2.0
-3
1.5
-6
3 V, 8 mA
5 V, 8 mA
5 V, 20 mA
1.0
1.3
1.4
1.5
1.6
1.7
1.8
-9
1.50
1.52
1.54
1.56
1.58
1.60
Frequency (GHz)
Frequency (GHz)
Gain @ 5 V, 8 mA
24
Noise Figure @ 5 V, 8 mA
2.2
22
1.9
+25°C
-40°C
+85°C
20
+25°C
-40°C
+85°C
1.6
18
1.3
16
1.3
1.4
1.5
1.6
1.7
1.8
1.0
1.50
1.52
1.54
1.56
1.58
1.60
Frequency (GHz)
3
Frequency (GHz)
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAALSS0044
Low Noise Amplifier
1.5 - 1.6 GHz
Lead-Free SOIC-8
†
Rev. V1
† Reference Application Note M538 for lead-free solder reflow recommendations.
Additional information is available in Application Note M540, “M/A-COM GaAs MMIC LNA SOIC-8 Platform”.
Meets JEDEC moisture sensitivity level 1 requirements.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
4
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
