TMP86PS64FG
The information contained herein is subject to change without notice. 021023 _ D
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless,
semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and
vulnerability to physical stress.
It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards
of safety in making a safe design for the entire system, and to avoid situations in which a malfunction
or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to
property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating
ranges as set forth in the most recent TOSHIBA products specifications.
Also, please keep in mind the precautions and conditions set forth in the
“Handling
Guide for
Semiconductor Devices,” or
“TOSHIBA
Semiconductor Reliability Handbook” etc. 021023_A
The Toshiba products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic
appliances, etc.).
These Toshiba products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of
human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments,
combustion control instruments, medical instruments, all types of safety devices, etc. Unintended
Usage of Toshiba products listed in this document shall be made at the customer's own risk. 021023_B
The products described in this document shall not be used or embedded to any downstream products
of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
060106_Q
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third
parties which may result from its use. No license is granted by implication or otherwise under any
patent or patent rights of TOSHIBA or others. 021023_C
The products described in this document may include products subject to the foreign exchange and
foreign trade laws. 021023_F
For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3
of the chapter entitled Quality and Reliability Assurance/Handling Precautions. 030619_S
© 2007 TOSHIBA CORPORATION
All Rights Reserved
Page 2
Table of Contents
TMP86PS64FG
1.1
1.2
1.3
1.4
Features
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pin Assignment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Block Diagram
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pin Names and Functions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
3
4
6
2.
Operational Descriptions
2.1
CPU Core Function
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Memory Address Map.............................................................................................................................
11
Program Memory (OTP)
......................................................................................................................... 12
Data Memory (RAM)
............................................................................................................................... 12
Clock Generator......................................................................................................................................
13
Timing Generator
.................................................................................................................................... 14
Operating Modes
.................................................................................................................................... 16
Single-Clock Mode
Dual-Clock Mode
STOP Mode
Operation Mode Transition
Timing Generator Configuration
Machine Cycle
2.2
2.1.1
2.1.2
2.1.3
2.2.1
2.2.2
2.2.3
System Clock Controller
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.2.2.1
2.2.2.2
2.2.3.1
2.2.3.2
2.2.3.3
2.2.3.4
2.2.4.1
2.2.4.2
2.2.4.3
2.2.4.4
2.2.4
Operating Mode Control
......................................................................................................................... 21
STOP Mode
IDLE1/2 and SLEEP1/2 Modes
IDLE0 and SLEEP0 Modes
SLOW Mode
2.3
Reset Circuit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
External Reset Input
...............................................................................................................................
Address-Trap-Reset
...............................................................................................................................
Watchdog Timer Reset
...........................................................................................................................
System Clock Reset
...............................................................................................................................
36
37
37
37
2.3.1
2.3.2
2.3.3
2.3.4
3.
Interrupt Control Circuit
3.1
3.2
3.3
3.4
Interrupt latches (IL15 to IL2)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Interrupt enable register (EIR)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Interrupt Source Selector (INTSEL).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Interrupt Sequence
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Interrupt acceptance processing is packaged as follows........................................................................
43
Saving/restoring general-purpose registers
............................................................................................ 44
Interrupt return
........................................................................................................................................ 46
Using PUSH and POP instructions
Using data transfer instructions
3.2.1
3.2.2
Interrupt master enable flag (IMF)
.......................................................................................................... 40
Individual interrupt enable flags (EF15 to EF4)
...................................................................................... 41
3.4.1
3.4.2
3.4.3
3.5.1
3.4.2.1
3.4.2.2
3.5
Software Interrupt (INTSW)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Address error detection
.......................................................................................................................... 47
i
DIY/开源硬件专区
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
