Data Sheet
October 5, 2009
HC006/010 Series DC-DC Converter Power Modules:
18-36Vdc Input; 3.3V-5Vdc Output; 6.6A-10A Output Current
Features
RoHS Compliant
Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
Delivers up to 10A Output current
5V (6.6A), 3.3V (10A)
High efficiency – 90% at 3.3V full load
Low Output voltage- supports migration to future IC
supply voltages down to 1.0V
Low output ripple and noise
Small Size and low profile
Applications
Wireless Networks
Distributed power architectures
Optical and Access Network Equipment
Enterprise Networks
Latest generation IC’s (DSP, FPGA, ASIC)
and Microprocessor powered applications
47.2mm x 29.5mm x
8.5mm
(1.86 x 1.16 x 0.335 in)
Surface mount or Through hole (TH)
Remote On/Off
Output overcurrent/Over voltage protection
Over temperature protection
Single Tightly regulated output
Output voltage adjustment trim
±10%
Wide operating temperature range (-40°C to 85°C)
Meets the voltage insulation requirements for ETSI
300-132-2 and complies with and is Licensed for
Basic Insulation rating per EN 60950
CE mark meets 73/23/EEC and 93/68/EEC
directives
§
UL*
60950-1Recognized,
CSA
†
C22.2 No. 60950-1-
03 Certified, and
VDE
‡
0805:2001-12 (EN60950-1)
Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
Options
Remote On/Off logic (positive or negative)
Surface Mount (-S Suffix)
Trimmed leads
Description
The HC series power modules are isolated dc-dc converters that operate over a wide input voltage range of 18 to 36
Vdc and provide one precisely regulated output. The output is fully isolated from the input, allowing versatile polarity
configurations and grounding connections. The modules exhibit high efficiency, e.g. typical efficiency of 90%
3.3/10A, 91% at 5V/6A. Built-in filtering for both input and output minimizes the need for external filtering. These
open frame modules are available either in surface-mount (-S) or in through-hole form.
*
UL
is a registered trademark of Underwriters Laboratories, Inc.
†
‡
CSA
is a registered trademark of Canadian Standards Association.
VDE
is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-122 ver. 1.45
PDF name: hc006-010_series_ds.pdf
Data Sheet
October 5, 2009
HC006/010 Series DC-DC Power Module:
18-36Vdc Input; 3.3V & 5Vdc Output; 6.6A - 10A Output Current
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in
excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect the device reliability.
Parameter
Input Voltage
Operating Ambient Temperature
(see Thermal Considerations section)
Storage Temperature
I/O Isolation Voltage (100% factory tested)
All
All
T
stg
⎯
-55
⎯
125
1500
°C
Vdc
Device
All
All
Symbol
V
IN
T
A
Min
-0.3
-40
Max
50
85
Unit
Vdc
°C
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions.
Parameter
Operating Input Voltage
Maximum Input Current
(V
IN
=0V to 75V, I
O
=I
O, max
)
Inrush Transient
Input Reflected Ripple Current, peak-to-peak
(5Hz to 20MHz, 12μH source impedance; V
IN
=0V to
75V, I
O
= I
Omax
; see Figure 9)
Input Ripple Rejection (120Hz)
EMC, EN55022
All
All
All
It
3
50
See EMC Considerations section
2
Device
HC
HC
Symbol
V
IN
I
IN,max
Min
18
Typ
24
Max
36
3.2
Unit
Vdc
Adc
1
As
mAp-p
dB
2
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This power module can be used in a wide variety of applications, ranging from simple standalone operation to an
integrated part of a sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included,
however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies
require a fast-acting fuse with a maximum rating of 5A (see Safety Considerations section). Based on the information
provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating
can be used. Refer to the fuse manufacturer’s data sheet for further information.
LINEAGE
POWER
2
Data Sheet
October 5, 2009
HC006/010 Series DC-DC Power Module:
18-36Vdc Input; 3.3V & 5Vdc Output; 6.6A - 10A Output Current
Electrical Specifications
(continued)
Parameter
Output Voltage Set-point
(V
IN
=V
IN,nom
, I
O
=I
O, max
, T
ref
=25°C)
Output Voltage
(Over all operating input voltage, resistive load,
and temperature conditions until end of life)
Adjustment Range
Selected by external resistor
Output Regulation
Line (V
IN
=V
IN, min
to V
IN, max
)
Load (I
O
=I
O, min
to I
O, max
)
Temperature (T
ref
=T
A, min
to T
A, max
)
Output Ripple and Noise on nominal output
(V
IN
=V
IN, nom
and I
O
=I
O, min
to I
O, max
)
Measured across 10μF tantalum//1μF ceramic
RMS (5Hz to 20MHz bandwidth)
Peak-to-Peak (5Hz to 20MHz bandwidth)
External Load Capacitance
All
All
3.3V
5.0V
Output Current
(At I
o
< I
o,min
the output ripple may exceed the
The max specifications. All modules shall
Operate at no load without damage and without
exceeding 100% of V
O, set
)
Output Current Limit Inception
(Vo = 90% of V
O, set
)
Output Short-Circuit Current
(V
O
≤250mV)
Efficiency
V
IN
=V
IN, nom
, T
A
=25°C
I
O
=I
O, max ,
V
O
= V
O,set
3.3V
5.0V
C
O, max
C
O, max
I
o
I
o
⎯
⎯
0
0
0.05
0.05
8
40
⎯
⎯
20
75
1000
470
10
6.6
mV
rms
mV
pk-pk
μF
μF
Adc
Adc
All
All
All
⎯
⎯
⎯
⎯
⎯
0.2
0.1
10
⎯
% V
O, set
mV
% V
O, set
All
V
O
-10.0
+10.0
% V
O, set
Device
3.3V
5.0V
All
Symbol
V
O, set
V
O, set
V
O
Min
3.25
4.92
-3.0
Typ
3.3
5.0
⎯
Max
3.35
5.08
+3.0
Unit
Vdc
Vdc
% V
O, set
3.3V
5.0V
3.3V
5.0V
3.3V
5.0V
I
O, lim
I
O, lim
I
O, s/c
I
O, s/c
η
η
⎯
⎯
⎯
⎯
⎯
⎯
12
8
17
13
90.0
91.0
⎯
⎯
⎯
⎯
⎯
⎯
Adc
Adc
Adc
Adc
%
%
LINEAGE
POWER
3
Data Sheet
October 5, 2009
HC006/010 Series DC-DC Power Module:
18-36Vdc Input; 3.3V & 5Vdc Output; 6.6A - 10A Output Current
Electrical Specifications
(continued)
Parameter
Switching Frequency
Dynamic Load Response
(ΔIo/Δt=0.1A/μs; V
in
=V
in
,nom; T
A
=25°C)
Load Change from Io= 50% to 75% of Io,max
Peak Deviation
Settling Time (Vo<10% peak deviation)
(ΔIo/Δt=0.1A/μs; V
in
=V
in
,nom; T
A
=25°C)
Load Change from Io= 75% to 50% of Io,max
Peak Deviation
Settling Time (Vo<10% peak deviation)
All
All
V
pk
t
s
⎯
⎯
200
200
⎯
⎯
mV
μs
All
V
pk
t
s
⎯
⎯
200
200
⎯
⎯
mV
μs
Device
All
Symbol
f
sw
Min
⎯
Typ
285
Max
⎯
Unit
kHz
Isolation Specifications
Parameter
Isolation Capacitance
Isolation Resistance
Symbol
C
iso
R
iso
Min
⎯
10
Typ
1000
⎯
Max
⎯
⎯
Unit
pF
MΩ
General Specifications
Parameter
Calculated MTBF (for HC010A0F1 in accordance with Lucent RIN:
I
O
=80% of I
O, max
, T
A
=25°C, airflow=1m/s)
Weight
⎯
Min
Typ
> TBD
13 (0.46)
Weight
Max
Unit
Hours
⎯
LINEAGE
POWER
4
Data Sheet
October 5, 2009
HC006/010 Series DC-DC Power Module:
18-36Vdc Input; 3.3V & 5Vdc Output; 6.6A - 10A Output Current
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions. See Feature Descriptions for additional information.
Parameter
Remote On/Off Signal Interface
(V
IN
=V
IN, min
to V
IN, max
; open collector or equivalent,
Signal referenced to V
IN-
terminal)
Negative Logic: device code suffix “1”
Logic Low = module On, Logic High = module Off
Positive Logic: No device code suffix required
Logic Low = module Off, Logic High = module On
Logic Low Specification
Remote On/Off Current – Logic Low
On/Off Voltage:
Logic Low
Logic High – (Typ = Open Collector)
Logic High maximum allowable leakage current
Turn-On Delay and Rise Times
(V
IN
=V
IN, nom
, I
O
=I
O, max ,
V
O
to within ±1% of steady state)
Case 1: On/Off input is set to Logic high and then
input power is applied (delay from instant at
which VI = VI,min until Vo = 10% of Vo, set)
Case 2: Input power is applied for at least one second
and then the On/Off input is set to logic high (delay
from instant at which Von/Off = 0.9V until Vo = 10% of
Vo, set)
Output voltage Rise time (time for Vo to rise from
10% of Vo, set to 90% of Vo, set)
Output voltage overshoot
(V
IN
=V
IN, nom,
Io = 80% of Io,max, T
A
=25°C)
Output Overvoltage Protection
Overtemperature Protection
(See Feature Descriptions)
Input Undervoltage Lockout
Turn-on Threshold
Turn-off Threshold
Device
Symbol
Min
Typ
Max
Unit
All
All
All
All
I
on/off
V
on/off
V
on/off
I
on/off
⎯
-0.7
⎯
⎯
0.15
⎯
⎯
1.0
1.2
15
50
mA
V
V
μA
All
Tdelay
20
msec
All
Tdelay
12
msec
All
All
3.3V
5.0V
All
Trise
―
5
―
msec
―
V
O, limit
V
O, limit
T
ref
⎯
⎯
⎯
―
4.0
6.1
125
5
4.6
7.0
⎯
%V
O,
set
V
V
°C
HC
HC
⎯
13
16
14
18
⎯
V
V
LINEAGE
POWER
5
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
