PRODUCT DATA SHEET
PhlatLight
®
White LED
Illumination Products
CBM-360 Series
Features
•
Extremely high optical output: Over 4,500 lumens from a sin-
gle package (White)
•
High thermal conductivity package - junction to heat sink
thermal resistance of only 0.96 ºC/W
•
Four large, monolithic chips with uniform emitting area of 36
mm
2
•
Lumen maintenance of greater than 70% after 60,000 hours
•
Environmentally friendly: RoHS compliant
•
Variable drive currents: less than 1 A through 6.3 A to full re-
liability specifications
PhlatLight
®
LEDs enable a new class of illumination
applications.
Table of Contents
Technology Overview............................................ 2
Test Specifications............................................... 2
PhlatLight Bin Codes............................................. 3
Product Shipping and Labeling Information.................. 6
•
High reliability
Applications
•
Medical Lighting
•
Machine Vision
•
Microscopy
•
Fiber Coupled Illumination
•
Architectural Lighting
•
Roadway and Parking Area
•
Transportation
Optical and Electrical Characteristics ........................ 7
Lifetime and Lumen Maintenance ............................. 8
Spectral Characteristics......................................... 8
Radiation Patterns ............................................... 9
Thermal Resistance .............................................. 9
Mechanical Dimensions.........................................10
Ordering Information ...........................................11
www.luminus.com
© 2009 Luminus Devices, Inc. - All Rights Reserved
Last Update 11-10-09
PDS_001253 Rev 03
CBM-360 - Product Datasheet
Technology Overview
PhlatLight LEDs benefit from a suite of innovations in the fields of chip technology, packaging, and thermal management. These break-
throughs allow illumination designers to achieve efficient light engine designs and deliver high brightness solutions.
PhlatLight Technology
The name PhlatLight is derived from Photonic Lattice. Photonic
lattice technology creates true surface emission from the source,
which enables large area LED chips with uniform brightness over
the entire LED chip surface. The optical power and brightness
produced by these large monolithic chips enable solutions which
replace arc and halogen lamps where arrays of traditional high
power LEDs cannot.
Reliability
Designed from the ground up, PhlatLight LEDs are one of the most
reliable light sources in the world today. PhlatLight LEDs have
passed a rigorous suite of environmental and mechanical stress
tests, including mechanical shock, vibration, temperature cycling
and humidity, and have been fully qualified for use in extreme
high power and high current applications. With very low failure
rates and median lifetimes that are well above 60,000 hours,
PhlatLight LEDs are ready for the most demanding applications.
Packaging Technology
Thermal management is critical in high power LED applications.
With a thermal resistance from junction to heat sink of 0.96 ºC/
W, PhlatLight CBM-360 devices have the lowest thermal resis-
tance of any LED on the market. This allows the LED to be driven
at higher current densities while maintaining a low junction tem-
perature, thereby resulting in brighter and longer lifetimes. The
package is easy to use, and ready to be mounted in the lighting
system.
Environmental Benefits
PhlatLight LEDs help reduce power consumption and the amount
of hazardous waste entering the environment. All PhlatLight
products manufactured by Luminus are RoHS compliant and free
of hazardous materials, including lead and mercury.
Understanding PhlatLight Test Specifications
Every PhlatLight LED device is fully tested to ensure that it meets the high quality standards of Luminus’ products.
Testing Temperature
PhlatLight LEDs are measured in such a way that the characteris-
tics reported agree with how the devices will actually perform
when incorporated into a system. This measurement is accom-
plished by mounting the devices on a 40º C heat sink and allowing
the device to reach thermal equilibrium while fully powered.
Only after the device reaches equilibrium are the measurements
taken. This method of measurement ensures that PhlatLight LEDs
perform in the field just as they are specified.
Multiple Operating Points (3.2 A, 6.3A)
The tables on the following pages provide typical optical and
electrical characteristics. Since the LEDs can be operated over a
wide range of drive conditions (currents from <1 A to 6.3 A, and
duty cycle from <1% to 100%) multiple drive conditions are listed.
PhlatLight CBM-360 devices are production tested at 6.3 A. The
values shown at 3.2 A are for additional reference at other possi-
ble drive conditions.
© 2009 Luminus Devices, Inc. - All Rights Reserved
Page 2
CBM-360 - Product Datasheet
PhlatLight White Binning Structure
PhlatLight White LEDs are tested for luminous flux and chromaticity at a drive current of 6.3 A (0.70 A/mm
2
) and placed into one of
the following luminous flux (FF) and chromaticity (WW) bins:
Flux Bins
Color
W65S
6500K, Standard CRI (typ. 70)
Flux Bin (FF)
WU
WV
WX
WU
WV
WX
WU
WV
WX
WU
WV
WX
Minimum Flux (lm)
@ 6.3 A
3,000
3,600
4,300
3,000
3,600
4,300
3,000
3,600
4,300
3,000
3,600
4,300
Maximum Flux (lm)
@ 6.3 A
3,600
4,300
5,100
3,600
4,300
5,100
3,600
4,300
5,100
3,600
4,300
5,100
W57S
5700K, Standard CRI (typ. 70)
W50S
5000K, Standard CRI (typ. 70)
W45S
4500K, Standard CRI, (typ. 70)
© 2009 Luminus Devices, Inc. - All Rights Reserved
Page 3
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
