Datasheet> 器件分类 > 半导体> 其他集成电路（IC）> LAN9311I-NZW

LAN9311I-NZW: 产品描述以太网 IC two port 10/100 ethernet switch; 产品类别半导体其他集成电路（IC）; 文件大小299KB，共8页; 制造商All Sensors; 标准

下载文档详细参数选型对比全文预览

LAN9311I-NZW在线购买

供应商	器件名称	价格	最低购买	库存
	LAN9311I-NZW	-	-	点击查看	点击购买

LAN9311I-NZW概述

以太网 IC two port 10/100 ethernet switch

LAN9311I-NZW规格参数

参数名称	属性值
厂商名称	All Sensors
产品种类	以太网 IC
RoHS	是
产品	Ethernet Switches
收发器数量	1
支持标准	802.3, 802.3u
数据速率	10 MB, 100 MB
电源电压（最大值）	3.3 V
电源电压（最小值）	0 V
最大工作温度	+ 85 C
封装 / 箱体	TQFP-100
封装	Tube
以太网连接类型	10 Base-T, 100 Base-TX
最小工作温度	- 40 C
安装风格	SMD/SMT
类型	Two Port Managed Ethernet Switch

文档预览

下载PDF文档

全文
预览

LAN9311/LAN9311i

Two Port 10/100 Managed

Ethernet Switch with 16-Bit

Non-PCI CPU Interface

PRODUCT FEATURES

Highlights

High performance and full featured 2 port switch with

VLAN, QoS packet prioritization, Rate Limiting, IGMP

monitoring and management functions

Easily interfaces to most 16-bit embedded CPU’s

Unique Virtual PHY feature simplifies software

development by mimicking the multiple switch ports

as a single port MAC/PHY

Integrated IEEE 1588 Hardware Time Stamp Unit

Ports

—

2 internal 10/100 PHYs with HP Auto-MDIX support

Fully compliant with IEEE 802.3 standards

10BASE-T and 100BASE-TX support

Full and half duplex support

Full duplex flow control

Backpressure (forced collision) half duplex flow control

Automatic flow control based on programmable levels

Automatic 32-bit CRC generation and checking

Automatic payload padding

2K Jumbo packet support

Programmable interframe gap, flow control pause value

Full transmit/receive statistics

Auto-negotiation

Automatic MDI/MDI-X

Loop-back mode

Provides in-band network communication path

Access to management registers

Simple, SRAM-like interface

16-bit data bus

Big, little, and mixed endian support

Large TX and RX FIFO’s for high latency applications

Programmable water marks and threshold levels

Host interrupt support

Data Brief

Target Applications

Cable, satellite, and IP set-top boxes

Digital televisions

Digital video recorders

VoIP/Video phone systems

Home gateways

Test/Measurement equipment

Industrial automation systems

High-performance host bus interface

Key Benefits

Ethernet Switch Fabric

— 32K buffer RAM

— 1K entry forwarding table

— Port based IEEE 802.1Q VLAN support (16 groups)

– Programmable IEEE 802.1Q tag insertion/removal

— IEEE 802.1d spanning tree protocol support

— QoS/CoS Packet prioritization

– 4 dynamic QoS queues per port

– Input priority determined by VLAN tag, DA lookup,

TOS, DIFFSERV or port default value

– Programmable class of service map based on input

priority

– Remapping of 802.1Q priority field on per port basis

– Programmable rate limiting at the ingress/egress

ports with random early discard, per port / priority

— IGMP v1/v2/v3 monitoring for Multicast packet filtering

— Programmable filter by MAC address

IEEE 1588 Hardware Time Stamp Unit

— Global 64-bit tunable clock

— Master or slave mode per port

— Time stamp on TX or RX of Sync and Delay_req

packets per port, Timestamp on GPIO

— 64-bit timer comparator event generation (GPIO or IRQ)

Comprehensive Power Management Features

—

Wake on LAN

Wake on link status change (energy detect)

Magic packet wakeup

Wakeup indicator event signal

Other Features

— General Purpose Timer

— Serial EEPROM interface (I

C master or Microwire

master) for non-managed configuration

— Programmable GPIOs/LEDs

Switch Management

— Port mirroring/monitoring/sniffing: ingress and/or egress

traffic on any ports or port pairs

— Fully compliant statistics (MIB) gathering counters

— Control registers configurable on-the-fly

SMSC LAN9311/LAN9311i

Single 3.3V power supply

Available in Commercial & Industrial Temp. Ranges

PRODUCT PREVIEW

Revision 1.7 (06-29-10)

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface

Order Number(s):

LAN9311-NU for 128-Pin, VTQFP Lead-Free RoHS Compliant Package (0 TO 70°C Temp Range)

LAN9311-NZW for 128-Pin, XVTQFP Lead-Free RoHS Compliant Package (0 TO 70°C Temp Range)

LAN9311i-NZW for 128-Pin, XVTQFP Lead-Free RoHS Compliant Package (-40 TO 85°C Temp Range)

This product meets the halogen maximum concentration values per IEC61249-2-21

For RoHS compliance and environmental information, please visit

www.smsc.com/rohs

80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123

Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for

construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC

reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications

before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent

rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated

version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors

known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not

designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property

damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of

this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered

trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.

SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE

OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL

DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT;

TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD

TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Revision 1.7 (06-29-10)

PRODUCT PREVIEW

SMSC LAN9311/LAN9311i

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface

General Description

The LAN9311/LAN9311i is a full featured, 2 port 10/100 managed Ethernet switch designed for

embedded applications where performance, flexibility, ease of integration and system cost control are

required. The LAN9311/LAN9311i combines all the functions of a 10/100 switch system, including the

switch fabric, packet buffers, buffer manager, media access controllers (MACs), PHY transceivers, and

host bus interface. The LAN9311/LAN9311i complies with the IEEE 802.3 (full/half-duplex 10BASE-T

and 100BASE-TX) Ethernet protocol specification and 802.1D/802.1Q network management protocol

specifications, enabling compatibility with industry standard Ethernet and Fast Ethernet applications.

At the core of the LAN9311/LAN9311i is the high performance, high efficiency 3 port Ethernet switch

fabric. The switch fabric contains a 3 port VLAN layer 2 switch engine that supports untagged, VLAN

tagged, and priority tagged frames. The switch fabric provides an extensive feature set which includes

spanning tree protocol support, multicast packet filtering and Quality of Service (QoS) packet

prioritization by VLAN tag, destination address, port default value or DIFFSERV/TOS, allowing for a

range of prioritization implementations. 32K of buffer RAM allows for the storage of multiple packets

while forwarding operations are completed, and a 1K entry forwarding table provides ample room for

MAC address forwarding tables. Each port is allocated a cluster of 4 dynamic QoS queues which allow

each queue size to grow and shrink with traffic, effectively utilizing all available memory. This memory

is managed dynamically via the buffer manager block within the switch fabric. All aspects of the switch

fabric are managed via the switch fabric configuration and status registers, which are indirectly

accessible via the memory mapped system control and status registers.

The LAN9311/LAN9311i provides 2 switched ports. Each port is fully compliant with the IEEE 802.3

standard and all internal MACs and PHYs support full/half duplex 10BASE-T and 100BASE-TX

operation. The LAN9311/LAN9311i provides 2 on-chip PHYs, 1 Virtual PHY and 3 MACs. The Virtual

PHY and the Host MAC are used to connect the LAN9311/LAN9311i switch fabric to the host bus

interface. All ports support automatic or manual full duplex flow control or half duplex backpressure

(forced collision) flow control. Automatic 32-bit CRC generation/checking and automatic payload

padding are supported to further reduce CPU overhead. 2K jumbo packet (2048 byte) support allows

for oversized packet transfers, effectively increasing throughput while deceasing CPU load. All MAC

and PHY related settings are fully configurable via their respective registers within the

LAN9311/LAN9311i.

The integrated Host Bus Interface (HBI) easily interfaces to most 16-bit embedded CPU’s via a simple

SRAM like interface, enabling switch fabric access via the internal Host MAC and allowing full control

over the LAN9311/LAN9311i via memory mapped system control and status registers. The HBI

supports 16-bit operation with big, little, and mixed endian operations. Four separate FIFO mechanisms

(TX/RX Data FIFO’s, TX/RX Status FIFO’s) interface the HBI to the Host MAC and facilitate the

transferring of packet data and status information between the host CPU and the switch fabric. The

LAN9311/LAN9311i also provides power management features which allow for wake on LAN, wake on

link status change (energy detect), and magic packet wakeup detection. A configurable host interrupt

pin allows the device to inform the host CPU of any internal interrupts.

The LAN9311/LAN9311i contains an I

C/Microwire master EEPROM controller for connection to an

optional EEPROM. This allows for the storage and retrieval of static data. The internal EEPROM

Loader can be optionally configured to automatically load stored configuration settings from the

EEPROM into the LAN9311/LAN9311i at reset.

In addition to the primary functionality described above, the LAN9311/LAN9311i provides additional

features designed for extended functionality. These include a configurable 16-bit General Purpose

Timer (GPT), a 32-bit 25MHz free running counter, a 12-bit configurable GPIO/LED interface, and IEEE

1588 time stamping on all ports and select GPIOs. The IEEE time stamp unit provides a 64-bit tunable

clock for accurate PTP timing and a timer comparator to allow time based interrupt generation.

The LAN9311/LAN9311i’s performance, features and small size make it an ideal solution for many

applications in the consumer electronics and industrial automation markets. Targeted applications

include: set top boxes (cable, satellite and IP), digital televisions, digital video recorders, voice over IP

and video phone systems, home gateways, and test and measurement equipment. System-level and

block-level diagrams of the LAN9311/LAN9311i can be seen in on the following pages.

SMSC LAN9311/LAN9311i

PRODUCT PREVIEW

Revision 1.7 (06-29-10)

LAN9311I-NZW相似产品对比

	LAN9311I-NZW
描述	以太网 IC two port 10/100 ethernet switch
厂商名称	All Sensors
产品种类	以太网 IC
RoHS	是
产品	Ethernet Switches
收发器数量	1
支持标准	802.3, 802.3u
数据速率	10 MB, 100 MB
电源电压（最大值）	3.3 V
电源电压（最小值）	0 V
最大工作温度	+ 85 C
封装 / 箱体	TQFP-100
封装	Tube
以太网连接类型	10 Base-T, 100 Base-TX
最小工作温度	- 40 C
安装风格	SMD/SMT
类型	Two Port Managed Ethernet Switch

推荐资源

《TMS320C28x系列DSP》读书笔记--通用目标文件格式: TMS320系列DSP的目标文件各式为通用目标文件格式 COFF（Command Object File Format,简称COFF）。采用这种目标文件各式的优点是：将指令和数据按照段的概念进行组织和存储，这使得程序的可读性 ......; qinkaiabc 微控制器 MCU

求助新手小白上路那位大侠愿意留个QQ号咨询咨询: 我是学CS的这学期在做一个Engineering的项目一排 8个LED 让LED自转用MSP430 控制LED显示字母对MSP 430 真是一窍不通啊~ ~ 求助愿意帮忙的都来留个QQ号吧 ...; chen189xi 微控制器 MCU

WINCE下载问题（NK.BIN > 32M): 定制OS，同时我增加了中文字体支持，但编译出来的NK.bin超过32M（我已经设置了IMGRAM64=1）， NK.bk0有80M左右，但用DWN下载的时候，总是报错，错误如下： Download BIN file informati ......; telesonic 嵌入式系统

求推荐一个12V-3.3V宽电压输入，3.3V2A输出的DC-DC芯片: 请推荐可以12V-3.3V宽电压输入，3.3V、2A输出的DC-DC芯片，电流可以大一点的，电流最好是2A左右的DCDC芯片国产最好 ...; kal9623287 电源技术

一种新型无源无损软开关Boost变换器: 一种新型无源无损软开关Boost变换器开关电源目前存在五个挑战性的问题，能否更加小型化就是其中之一。使开关电源小型化的重要途径是提高开关频率。高频化能使变压器和电感等磁性元件以及电容 ......; zbz0529 模拟电子

【设计工具】故障安全多重引导参考设计: Jim Wesselkamper在该应用指南中介绍了可将故障安全机制加入扩展Spartan®-3A系列FPGA（Spartan-3A、Spartan-3AN和Spartan-3A DSP平台）的多重引导功能的参考设计。该参考设计通过确定加载 ......; GONGHCU FPGA/CPLD

基于LDMOS的TD-SCDMA射频功率放大器

　　TD-SCDMA(时分同步码分多址接入)是第三代移动通信三大主流标准之一，是我国具有自主知识产权的通信标准，它标志着中国在移动通信领域已经进入世界先进行列，目前，TD-SCDMA的商用化进程正在顺利地进行之中。TD-SCDMA系统采用的是QPSK/8PSK调制，在高速的数据传输应用中，更是采用了如16QAM这样的调制方式。这些调制方式都属于非恒包络调制。由于调制信号在幅度和相位上都存在误差...[详细]
手机无线芯片出货量放缓但前景可期

　　市场研究集团Forward Concepts通过对WSTS的最新半导体出货量统计数据进行分析，认为尽管出现了手机芯片的出货量放缓现象，但对统计的数据表示质疑。　　手机专用DSP和RISC芯片的五月份出货量比四月份增加了8%，从去年五月份累计增长率为47%。　　Forward Concepts的总裁Will Strauss同时也指出，WSTS的报告称用于无线设备的DSP五月份出货量比四...[详细]
超高频RFID与其他无线网络的电磁兼容性研究

　　无线射频识别(RFID)技术是一种非接触式的自动识别技术，它通过射频信号从目标对象读写相关数据实现自动识别。RFID基本系统由标签、阅读器以及读写器天线3部分组成。　　RFID技术利用射频信号作为信息传输中介实现远距离信息获取，通过高数据速率实现对高速运动物体的识别，并可同时识别多个标签。正由于RFID技术的诸多优点，它在物流管理、公共安全、仓储管理、门禁防伪等方面的应用迅速展开，国际上...[详细]
传感与RFID在血液管理分析中运用

　　1 引言　　传感技术与RFID的融合运用还刚刚起步，中国作为世界的制造业大国与消费大国之一，应牢牢抓住这一机遇，自主探索，推动本土RFID产业的发展，提升社会信息化的水平。　　RFID，即无线射频识别技术，利用射频信号通过空间耦合(交变磁场或电磁场)实现无接触的信息传递，并通过所传递的信息达到识别目的，被列为21世纪最有前途的重要产业和应用技术之一。　　RFID标签具有体...[详细]
采用DSP和FPGA构建高速高精运动控制器

　　数字信号处理器具有高效的数值运算能力，并能提供良好的开发环境，而可编程逻辑器件具有高度灵活的可配置性。本文描述了通过采用TMS320C32浮点DSP和可编程逻辑器件(FPGA)的组合运用来构成高速高精运动控制器，该系统通过B样条插值算法对运动曲线进行平滑处理以及运用离散PID算法对运动过程加以控制。　　运动控制卡已经在数控机床、工业机器人、医用设备、绘图仪、IC电路制造设备、IC封装...[详细]
基于逻辑分析内核的FPGA电路内调试技术

　　随着FPGA融入越来越多的能力，对有效调试工具的需求将变得至关重要。对内部可视能力的事前周密计划将能使研制组采用正确的调试战略，以更快完成他们的设计任务。　　“我知道我的设计中存在一个问题，但我没有很快找到问题所需要的内部可视能力。”由于缺乏足够的内部可视能力，调试FPGA基系统可能会受挫。使用通常包含整个系统的较大FPGA时，调试的可视能力成为很大的问题。为获得内部可视能力，设计工程师必...[详细]
加拿大“微型机器手” 可完好抓起细胞

　　据英国《新科学家》杂志今日报道，加拿大多伦多大学开发的新型微型机器手是一对微型的机器钳子，具有最灵敏的抓握，可抓起和移动一个细胞，而不破坏这个细胞。此微型机器手可用于组装细胞到人造组织结构中，或制造微米级和纳米级的装置。　　此机器钳子可施展小到20纳牛顿的力，1纳牛顿是十亿分之一牛顿。加拿大多伦多大学负责开发此项目的研究人员孙余(音译)表示，这是机器人首次能感受到它们如此轻微地抓握物体的...[详细]
几种新型的高性能生物电放大器

　　概述　　生物电信号十分微弱，在检测生物电信号的同时存在强大的干扰，因此，设计高质量的生物电放大器有许多技术困难。　　本文介绍了使用ADI公司生产的集成化仪用放大器和运算放大器，设计了几种新的结构形式的高性能生物电前置放大器。图1 生物电前置放大器设计应用一图2 生物电前置放大器设计应用二图3 生物电前置放大器设计应用三　　几种新型高性能生物...[详细]
LSI推出针对Silverlight™ 的内容处理方案

2008 年 7 月 14 日， LSI 公司宣布推出针对 Microsoft® Silverlight™ 平台的内容处理解决方案，进一步扩大其产品系列范围。与最初的基于视频加速技术的内容处理产品系列相比，新系列还将包括 LSI™ Tarari® 系列内容处理器解决方案。因此该系列已经成为一套完整的解决方案，可支持安全性、服务质量、基于内容计费以及带宽管理等功...[详细]
电子压力控制器PID算法的研究(图)

　　随着自动控制技术的发展，精密气压产生与控制技术的应用越来越广泛。而传统的阀门控制器控制精度不够，运行速度缓慢，且价格昂贵，已不能满足这方面的要求。　　本文着重介绍一种了基于英飞凌XC164单片机和PI控制算法的电子压力控制器，以及借助此装置对实现精密压力控制的探索。　　自动选择系统组成与实现　　电子压力控制系统由供气设备、控制器、阀门、储气设备、传感器单元等部分构成。电子压力控...[详细]
PCI总线数据输出板驱动程序的开发(图)

　　PCI(Perip heral Component Interconnect )是一种先进的高性能32/64位局部总线，支持线性突发传输，数据最大传输率可达132MB/s。同时，PCI总线存取延误小，采用总线主控和同步操作，不受处理器限制，具有自动配置功能，非常适合于高速外设。所以，它正迅速取代原先的ISA总线成为微型计算机系统的主流总线。　　随着工业控制pci设备的增多，需要开发大量专...[详细]
基于Bang-Bang控制的温湿度调节系统(图)

　　在一些仓储管理、生产制造、气象观测、科学研究以及日常生活中，对温湿度的要求普遍存在，如《档案库房技术管理暂行规定》中就明确指出：档案库房（含胶片库、磁带库）的温度应控制在14～24℃，有设备的库房日变化幅度不超过±2℃；相对湿度应控制在45%～60%，有设备的库房日变化幅度不超过±5%。本文利用新型的C8051F020单片机和I2C总线数字式温湿度传感器SHT11设计了一套满足此要求的自动化...[详细]
英特尔计划未来推出最新无线上网芯片

　　全球半导体龙头英特尔(Intel)7月15日推出搭配最新WiMAX无线通讯功能的芯片--Centrino 2，在笔记型电脑即将取代桌上型电脑之际，切入最新无线上网应用技术来扩大销售。　　Centrino 2的推出已较原定时间延后数月，相较2003年第一代内建无线上网功能Centrino时的轰动上市，英特尔在全球同步推出Centrino 2，态度显得低调许多。　　IDC亚太区个人系统研...[详细]
英特尔推出新的嵌入式新处理器及芯片组

　　英特尔推出了面向嵌入式用户的英特尔® 酷睿™2 双核处理器 T9400和移动式英特尔® GM45 高速芯片组，并提供长达7年的超长生命周期支持。本次推出的处理器和芯片组是全新的英特尔® 迅驰® 2 平台的构成组件，可为移动应用程序带来更耐久的电池使用时间和广泛的无线网络互操作性。　　新推出的英特尔® 酷睿™2 双核处理器 T9400经验证可支持英特尔® 5100 内存控制器中枢(MCH)...[详细]
五大工业展会联袂打造华南制造业盛宴

　　2008年8月26-29日，华南地区的五大品牌工业展会——NEPCON / EMT 华南展（第十四届华南国际电子生产设备暨微电子工业展/华南国际电子制造技术展览会）、华南国际汽车电子展（AE South China）、华南国际工业组装技术与装备展览会（ATE South China）和华南国际平面显示器制造技术展（Finetech South China）将在深圳会展中心隆重举行。从组委会获...[详细]

器件捷径: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

热门器件

开源项目推荐更多

热门活动更多

热门文章更多

技术资料推荐更多