After 1,000 hours application of rated voltage at 65°C.
BPAK0052 B01
BPAK0052 B02
BPAK0058 B01
BPAK0058 B02
52 F
52 F
±20%
15 V
15 V
50 V
1,100 V
58 F
58 F
0.8 mΩ
6.5°C/W
0.58 mΩ
±25%
5.3°C/W
-40°C to +65°C
-40°C to +70°C
19 mΩ
1.8°C/W
19 mΩ
1.8°C/W
Within
±5% of initial measured value at 25°C (at -40°C)
Within
150% of initial measured value at 25°C (at -40°C)
3,000 W/kg
11,200 W/kg
3.63 Wh/kg
3,000 W/kg
11,200 W/kg
3.63 Wh/kg
Capacitance change
Internal resistance change
Life test
After 10 years at rated voltage and 25°C.
Within 20% of initial specified value
Within 25% of initial specified value
Capacitance change
Internal resistance
Within 20% of initial specified value
Within 100% of initial specified value
Page 1 • Document number: 1009361.10
DATASHEET
®
15V POWER AND ENERGY SERIES ULTRACAPACITOR PACKS
BPAK0052 P015 B01
BPAK0052 P015 B02
BPAK0058 E015 B01
BPAK0058 E015 B02
PRODUCT SPECIFICATIONS (cont.)
CYCLES
Capacitance change
Internal resistance
CURRENT
Leakage current
After 72 hours at 25°C. Initial leakage
current can be higher.
BPAK0052 B01
BPAK0052 B02
BPAK0058 B01
BPAK0058 B02
Capacitors cycled between specified voltage and half rated voltage under constant current at 25 °C (500,000 cycles).
Within 20% of initial specified value
Within 100% of initial specified value
1 mA
1,500 A
55 mA
1,500 A
1 mA
1,500 A
55 mA
1,500 A
Short circuit current (lsc)
CAUTION:
C urrent possible with
short circuit from UR. Do not use as an
operating current
Maximum continuous current
Maximum peak current, 1 sec
CONNECTION
Terminal
MONITORING (IN-BUILT)
Balancing
Thermal monitoring
SIZE
Dimensions
Mass
Volume
RATINGS
Vibration resistance
20 A
80 A
20 A
80 A
Screw
20 A
80 A
20 A
80 A
Active
Passive
N/A
See drawing.
Active
Passive
500g
0.566 L
500g
0.566 L
IEC 61373
560g
0.566 L
560g
0.566 L
Page 2 • Document number: 1009361.10
DATASHEET
®
15V POWER AND ENERGY SERIES ULTRACAPACITOR PACKS
BPAK0052 P015 B01
BPAK0052 P015 B02
BPAK0058 E015 B01
BPAK0058 E015 B02
DIMENSIONS (mm)
Part number
BPAK0052 P015 B01
BPAK0052 P015 B02
BPAK0058 E015 B01
BPAK0058 E015 B02
L
216
216
216
216
W
69
69
69
69
H
38
38
38
38
Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. Please contact Maxwell
Technologies directly for any technical specifications critical to application.
MOUNTING RECOMMENDATIONS
Units may be mounted and operated in any orientation. The pack should be shock mounted within a protective enclosure. Care
should be taken to prevent motion between the pack and the enclosure. This motion can wear through the shrink-wrap covering
over time and expose electrically conductive surfaces.
Do not reverse polarize module.
MARKINGS
Modules are marked with the following information:
Rated capacitance, rated voltage, product number, name of manufacturer,
positive and negative terminal, warning marking, serial number.
这标志着在物流供应链打印中处于全球领先地位的美国普印力PRINTRONIX更加看好中国市场,进一步加大在中国的投资力度,依托国际性分销商和本土的行业巨头进一步深入中国市场。 来自政府相关部门的领导、自动识别行业专家、行业客户代表以及新闻媒体出席了新闻发布会,普印力全球高级销售总裁James B. McWilson以及大中华区总经理Roger Zhao出席会议,与闪联总裁孙育宁博士现场...[详细]
便携式医疗设备的特殊性决定了它们应该是对用户友好的、必须工作在无菌环境下,并且空间占用小、耗能低。 同时,便携式医疗设备还需要足够的计算能力以便处理医疗数据,能够连接到无线或有线接口以便记录和发送数据。从设计人员的角度考虑,上述需求需要低功耗的单片机(MCU)和数字信号控制器(Digital Signal Controller,DSC)。 正是有了嵌入式处理器,设计人员才有可能设...[详细]