BCcomponents
Product specification
Thick film flat chip resistors
FEATURES
DCS 0402; DCT 0603;
DCU 0805; DCA 1206
ceramic substrate to form the resistive layer. Pre-contacts are
printed on both sides of the substrate. The resistors are laser
trimmed to the target value. The resistor elements are
covered by glass and a protective coating combined for
superior electrical, mechanical and climatic protection. The
prepared terminations receive an electroplating of PbSn
solder on nickel plating. A three or four digit code
designates the nominal resistance value.
•
State of the art thick film technology
•
Improved termination design
•
Standard TC:
±
100 and
±
200 ppm/K
•
Tight tolerance available:
±
1%
Case sizes
Imperial: 0402
Metric:
0603
0805
1206
RR 1005M RR 1608M RR 2012M RR 3216M
APPLICATIONS
The result of the determined production is verified by a final
test performed on 100% of the individual chip resistors.
Only accepted products are laid directly into the paper tape
according to
IEC 60286-3.
The resistors are suitable for processing on automatic SMD
assembly systems. They are suitable for automatic soldering
using wave, reflow or vapour phase. The encapsulation is
resistant to all cleaning solvents commonly used in the
electronics industry, including alcohols, esters and aqueous
solutions.
The resistors are tested in accordance with
IEC 60115-1
and
IEC 60115-8.
This product family of thick film flat chip resistors is
completed by
Zero Ohm Jumpers.
•
All general purpose applications
•
Office automation equipment
•
Consumer electronics.
DESCRIPTION
DCS 0402, DCT 0603, DCU 0805 and DCA 1206 thick film
chip resistors are made for all general purpose
applications. They are typically used in the production of
office automation equipment and consumer electronics.
The production is performed in a mass volume production
site. A thick film is screen printed on a high grade alumina
2002 Sep 24
2
BCcomponents
Product specification
Thick film flat chip resistors
ORDERING INFORMATION
DCS 0402; DCT 0603;
DCU 0805; DCA 1206
Components may be ordered by using either a simple clear text ordering code, see “Type description and ordering code”
or BCcomponents’ unique 12NC.
Numeric Ordering code (12NC)
•
The resistors have a 12-digit ordering code starting with 2312.
•
The subsequent 4 digits indicate the resistor type, specification and packaging; see Table 2.
•
The remaining 4 digits indicate the resistance value:
– The first 3 digits indicate the resistance value.
– The last digit indicates the resistance decade in accordance with Table 3.
Table 2
12NC ordering code indicating resistor type and packaging
ORDERING CODE 2312 ... .....
CARDBOARD TAPE ON REEL
PA
5000
units
E0
10000
units
364 1....
364 3....
364 90001
−
−
−
−
−
−
−
−
−
O
RDERING EXAMPLE
The ordering code of a DCT 0603 resistor, value 100 k
Ω
with
±
1% tolerance, supplied in cardboard tape of
20000 units per reel is: 2312 309 71004.
PW
20000
units
DESCRIPTION
TYPE
TOL.
DCS 0402
DCT 0603
DCU 0805
DCA 1206
±
5%
±
1%
jumper
±
5%
±
1%
jumper
±
5%
±
1%
jumper
±
5%
±
1%
jumper
−
−
−
304 1....
304 7....
304 90001
324 1....
324 7....
324 90001
344 1....
344 7....
344 90001
−
−
−
309 1....
309 7....
309 90001
329 1....
329 7....
329 90001
349 1....
349 7....
349 90001
Table 3
Last digit of 12NC indicating resistance decade
LAST DIGIT
8
9
1
2
3
4
5
6
RESISTANCE DECADE
1 to 9,99
Ω
10 to 99,9
Ω
100 to 999
Ω
1 k
Ω
to 9,99 k
Ω
10 k
Ω
to 99,9 k
Ω
100 k
Ω
to 999 k
Ω
1 M
Ω
to 9,99 M
Ω
10 M
Ω
to 99,9 M
Ω
2002 Sep 24
5
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
