Dry Contact Relay Kit
RELAYCARD-SDU
Instruction Manual
Contents
What’s Included ..................................................................................................... 4
Installation ............................................................................................................. 4
Product Description ............................................................................................... 5
While every precaution has been taken to ensure accuracy and completeness in this manual,
EGS Electrical Group, LLC. assumes no responsibility, and disclaims all liability for damages
resulting from use of this information or for any errors or omissions.
The SolaHD and Emerson logos are registered in the U.S. Patent and Trademark Office. All
other product or service names are the property of their registered owners.
©2011 EGS Electrical Group, LLC. All rights reserved. Specifications are subject to change
without notice.
What’s Included
• One dry contact relay box
• One interface cable (DB-9 connector)
• One 12 V dc power interconnection cable
• Four M3 mounting screws
Installation
!
Only qualified personnel should install or service this system. electrical
safety precautions must be followed when installing or servicing this
equipment. To prevent risk of electrical shock, turn off and lock out all
power sources to the unit before making electrical connections.
1.
Using the four M3 screws provided, mount the dry relay box on the right side
of the SDU UPS. If mounting on a separate chassis, the hole diameter for the
relay box is 0.378 in. (3.5 mm).
2.
Plug the 12 V dc power interconnection cable into the 12 V dc input (Vin) of
the relay box. Plug the other end of the power interconnection cable into the
aux dc output (or Vout) of the SDU UPS.
3.
Plug the DB-9 connector cable into the RS232 communication port of the
SDU UPS. Plug the other end of the connector into the remote port of the dry
contact relay.
Danger!
RELAYCARD-SDU Instruction Manual • 4
Product Description
Vin
REMOTE PORT
1.26 (32.0)
AC FAILURE
BAT LOW
S.D.
3.73 (94.6)
.20 (5.0)
3.84 (88.4)
S.D. TEST
S.D.
BAT LOW
AC FAILURE
3.09 (78.4)
2.59 (65.7)
Front and Bottom Views
All dimensions are in inches (mm)
.591
(15.0)
1. Vin:
Input connector used to provide the dry contact relay with 12 V dc input
power.
2. remote Port:
This communication port is used for linking to the SDU UPS.
nOTe:
The provided connection cable is used only for this dry contact relay.
3. aC Failure Indicator:
This yellow LED is illuminated when ac voltage is
abnormal.
4. Battery (Bat) Low Indicator:
This green LED is illuminated when battery
capacity is low.
5. Shut Down (S.D.) Indicator:
When the dry contact relay receives the shut
down signal for 1 second, the red LED is illuminated and the SDU UPS goes
into shut down mode.
RELAYCARD-SDU Instruction Manual • 5
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
