Tower UPS with Extended-run, full isolation, USB &
Serial ports
MODEL NUMBER:
SMART1200XLHG
Highlights
1000VA / 1kVA line interactive,
extended run tower UPS
Maintains 120V nominal output
over an input range of 81 to 143V
Professional features include
serial port, hospital grade plug &
outlets, built-in isolation
transformer and UL 60601-1
listing
Input: Hospital-grade NEMA
5-15P (120V 15A) / Output: 4
Hospital-grade NEMA 5-15R
(120V)
Reduce cumulative shock
potential to less than
100microamps
Package Includes
Description
Tripp Lite's SMART 1200XLHG offers medical-grade UPS protection with built-in line-interactive voltage
regulation, expandable battery runtime and intelligent monitoring with unattended shutdown capability. UL
60601-1 listed as medical electrical equipment. Built-in isolation transformer with Faraday shield offers full line
isolation and removes common mode noise while maintaining full AC surge suppression in all modes less than
100 microamps. Includes high quality hospital-grade plug and outlets. Resistant to electrostatic discharge. 1000VA power handling capacity supports
computers, inter-networking equipment and other critical loads during commercial power failures. External battery connector allows configuration for up to
several hours of runtime during power failures by adding one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible). Line
interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V back to normal 120V levels, saving battery reserves for use
only during complete power failures. Includes diagnostic LEDs and 2 built-in communications ports (1 USB, 1 DB9) that work with included PowerAlert
Software and cabling to provide automatic unattended shutdown of connected network and PC applications.
SMART 1200XLHG Medical
Grade Tower UPS System
PowerAlert Software and cabling
Warranty information
Instruction manual
Features
Ideal UPS protection for applications in medical patient-care areas where UL 60601-1 listed medical electrical equipment is required
Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all
modes
Provides connected equipment with continuous power during short and long duration loss of commercial power
Expandable runtime is available with the addition of one or more external battery packs BP36V15-2U (limit 1); BP36V42-3U (multi-pack compatible);
BP36V27-2US (multi-pack compatible)
Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery
power
Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
Resistant to electrostatic discharge
Supports loads up to 1000VA/750W
1/6
28 min. half-load runtime (500VA/375W), 10 min. full load runtime (1000VA/750W)
4 protected hospital-grade outlets; 6-ft. cord
USB and DB9 communication ports
PowerAlert unattended shutdown software and complete cabling included
Complete surge protection, line isolation and EMI/RFI noise filtering
5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
Battery replacement door and back panel grounding lug
Specifications
OUTPUT
Output Volt Amp Capacity (VA)
Output kVA capacity (kVA)
Output Watt Capacity (watts)
Output power factor
Nominal Output Voltage(s)
Supported
Frequency compatibility
Output voltage regulation (line mode)
Output voltage regulation (Battery
mode)
Built-in UPS output receptacles
Output receptacle details
Output AC waveform (AC mode)
Output AC waveform (battery mode)
1000
1
750
0.8
115V; 120V
60 Hz
-18%, +8%
115V (+/- 5%)
4 5-15R outlet(s)
Hospital grade output receptacles
Sine wave
PWM sine wave
INPUT
Rated input current (at maximum
load)
Nominal Input Voltage(s) Supported
UPS input connection type
Input circuit breaker
UPS Input cord length (ft.)
UPS Input cord length (m)
Recommended Electrical Service
Phase
9.2A
120V AC
5-15P-HG
15A
6
1.8
15A 120V
Single-Phase
BATTERY
2/6
Full load runtime (minutes)
Half load runtime (minutes)
Expandable battery runtime
External battery pack compatibility
DC system voltage (VDC)
Battery recharge rate (included
batteries)
Replacement battery cartridge
(internal UPS battery replacement)
Battery Access
Battery replacement description
10 min. (750w)
28 min. (375w)
Extended runtime supported via optional external battery packs
BP36V15-2U
(limit 1);
BP36V42-3U
(multi-pack compatible);
BP36V27-2US
(multi-pack compatible)
36
Less than 4.5 hours from 10% to 90%
RBC53
Battery access door
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation description
Overvoltage correction
Undervoltage correction
Severe undervoltage correction
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 81 to 143
Input voltages between 126 and 143 are reduced by 9%
Input voltages between 96 and 106 are boosted by 10%
Input voltages between 81 and 95 are boosted by 21%
LEDS ALARMS & SWITCHES
LED Indicators
Alarms
Alarm cancel operation
Switches
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Audible alarm indicates power-failure, overload and low-battery conditions
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating
UPS AC suppression response time
EMI / RFI AC noise suppression
480
Instantaneous
Yes
ISOLATION
Output isolation transformer
Leakage current
Hospital grade load isolation transformer
Equal to 100 microamps
PHYSICAL
Installation form factors supported
with included accessories
Installation form factors supported
with optional accessories
Tower
Wallmount (UPSWM - tower mounting kit)
3/6
Primary form factor
UPS / Power Module dimensions in
primary form factor (height x width x
depth / inches)
UPS / Power Module dimensions in
primary form factor (height x width x
depth / cm)
UPS / Power Module weight (lbs)
UPS / Power Module weight (kg)
UPS Shipping dimensions (height x
width x depth / inches)
UPS Shipping dimensions (height x
width x depth / cm)
Shipping weight (lbs)
Shipping weight (kg)
Cooling method
UPS housing material
Tower
12.5 x 7.5 x 9.5
31.8 x 19 x 24.1
45.2
20.5
18.2 x 11.8 x 13.5
46.4 x 29.8 x 34.3
51
23.2
Fan
PVC
ENVIRONMENTAL
Operating Temperature Range
Storage Temperature Range
Relative Humidity
AC mode BTU / hr. (full load)
Battery mode BTU / hr. (full load)
AC mode efficiency rating (100%
load)
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
0 to 95%, non-condensing
162.8
315.2
94%
COMMUNICATIONS
Communications interface
Network monitoring port description
PowerAlert software
Communications cable
USB; DB9 Serial
Supports detailed monitoring of UPS and site power conditions
Included
USB and DB9 serial cabling included
LINE / BATTERY TRANSFER
Transfer time
Low voltage transfer to battery
power (setpoint)
High voltage transfer to battery
power (setpoint)
2-4 milliseconds
81
143
SPECIAL FEATURES
4/6
Grounding lug
Cold Start (startup in battery mode
during a power failure)
High availability UPS features
Grounding lug
Cold-start operation supported
Hot swappable batteries
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category A (EMI); Tested to UL60601-1
(medical grade)
WARRANTY
Product Warranty Period (Worldwide)
2-year limited warranty
Related Items
Optional Products
Model Number
BP36V15-2U
BP36V42-3U
BP36V27-2US
DB9
DCATV
DNET1
DTEL2
N001-014-BK
N001-014-BL
N001-014-GY
N001-025-BL
N002-014-BL
N010-007-GY
N022-01K-GY
N032-001
N033-001
Description
BP36V15-2U - External Battery Pack for UPS System
BP36V42-3U - External Battery Pack for UPS System
BP36V27-2US - 2U External 36V Rack/Tower Battery Pack for select Tripp Lite UPS Systems
Network Surge Suppressor - Essential protection for data and communication lines
Network Surge Suppressor - Essential protection for TV/VCR coaxial lines
Network Surge Suppressor - Essential protection for data and communication lines
Network Surge Suppressor - Essential protection for data and communication lines
SynQor推出超小的病人全接触型400W医疗电源模块，该电源模块的封装为3×5×1.44，功率密度高达18.3W/立方英寸，转换效率达91%。 SynQor通过推出首款专门针对医疗应用而研制的AC/DC电源模块，使得公司的多元化战略持续成功地延伸至新的医疗领域。ACuQor模块系列实现了在3×5×1.44有限尺寸上提供400W的有用功率。SynQor可以提供48V，36V or 24V的...[详细]
机器人开发
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
