Tripp Lite's SMART750 intelligent, line-interactive UPS system protects servers, networking accessories and
telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries
offer 16.2 minutes half load runtime and 5.6 minutes at full load during power failures. 750VA/450 watt power
and UPS/Power monitoring
software
Instruction manual
handling capability supports a variety of networking, telecom and various other application types, including the support of multiple network workstations.
Includes a total of 6 UPS supported outlets. Supports remote monitoring of UPS and site power conditions via built-in USB monitoring port. Includes
PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in audible alarm and 5 front panel LEDs indicate status of line
power, battery power, battery low/replace, voltage regulation and load level. Wall mountable with UPSWM wallmount bracket. Network-grade AC surge
suppression protects equipment from damage and performance problems resulting from transient surges.
Features
750VA/450 watt power handling capability supports a variety of networking, telecom and various other application types
Built-in voltage regulation and battery support, plus complete AC line surge suppression prevents equipment damage, data loss and downtime
Large internal batteries offer 16.2 minutes half load runtime and 5.6 minutes at full load during power failures
Automatic Voltage Regulation (AVR) circuits with two boost and one voltage reduction level maintains usable 120V nominal output over an input voltage
range of 75-147V
Includes a total of 6 NEMA5-15R outlets
Includes USB communications port for remote monitoring of UPS status and site power conditions
Communications port enables safe unattended shutdown without data loss during extended power failures
Communications port supports messaging of UPS and line power status, including on-battery, low-battery, power-restored, AC line voltage, DC battery
voltage and battery capacity
Communications port supports timed inverter shutoff after unattended shutdown, activate self-test and 10-second reboot of connected equipment
PowerAlert UPS monitoring and unattended shutdown software with complete cabling included
Battery replacement door allows on-site hot-swap battery replacement
Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked
computers by automatically switching UPS power off and back on again
Notification of system status via 5 LEDs and multi-function audible alarms
1/5
Notification of system status via 5 LEDs and multi-function audible alarms
Wall mountable with UPSWM wallmount bracket
Cold start capability enables UPS turn-on in battery mode during blackout conditions
Specifications
OUTPUT
Output Volt Amp Capacity (VA)
Output Watt Capacity (watts)
Output power factor
Nominal Output Voltage(s)
Supported
Frequency compatibility
Output voltage regulation (line mode)
Output voltage regulation (Battery
mode)
Built-in UPS output receptacles
Output AC waveform (AC mode)
Output AC waveform (battery mode)
750
450
0.6
115V; 120V
60 Hz
-18%, +8%
115V (+/- 5%)
6 5-15R outlet(s)
Sine wave
PWM sine wave
INPUT
Rated input current (at maximum
load)
Nominal Input Voltage(s) Supported
UPS input connection type
UPS Input cord length (ft.)
UPS Input cord length (m)
Recommended Electrical Service
Phase
4.4A
120V AC
5-15P
6
1.8
15A 120V
Single-Phase
BATTERY
Full load runtime (minutes)
Half load runtime (minutes)
DC system voltage (VDC)
Battery recharge rate (included
batteries)
Replacement battery cartridge
(internal UPS battery replacement)
Battery Access
5.6 min. (450w)
16.2 min. (225w)
12
Less than 6 hours from 10% to 90%
RBC52
(quantity 2)
Battery access door
2/5
Battery replacement description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation description
Overvoltage correction
Undervoltage correction
Severe undervoltage correction
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75V to 147V
Input voltages between 128 and 147 are reduced by 12%
Input voltages between 93 and 107 are boosted by 14%
Input voltages between 75 and 92 are boosted by 30%
LEDS ALARMS & SWITCHES
LED Indicators
Alarms
Alarm cancel operation
Switches
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Audible alarm indicates power-failure and low-battery conditions
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating
UPS AC suppression response time
EMI / RFI AC noise suppression
510
Instantaneous
Yes
PHYSICAL
Installation form factors supported
with included accessories
Installation form factors supported
with optional accessories
Primary form factor
UPS / Power Module dimensions in
primary form factor (height x width x
depth / inches)
UPS / Power Module dimensions in
primary form factor (height x width x
depth / cm)
UPS / Power Module weight (lbs)
UPS / Power Module weight (kg)
UPS Shipping dimensions (height x
width x depth / inches)
UPS Shipping dimensions (height x
width x depth / cm)
Shipping weight (lbs)
Shipping weight (kg)
UPS housing material
Tower
Wallmount (UPSWM - tower mounting kit)
Tower
11.8 x 7.2 x 7.5
29.8 x 18.4 x 19
23
10.4
15.5 x 11 x 11.2
39.4 x 27.9 x 28.6
25
11.4
PVC
3/5
ENVIRONMENTAL
Operating Temperature Range
Storage Temperature Range
Relative Humidity
AC mode BTU / hr. (full load)
Battery mode BTU / hr. (full load)
AC mode efficiency rating (100%
load)
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
0 to 95%, non-condensing
133
565.9
92%
COMMUNICATIONS
Communications interface
Network monitoring port description
PowerAlert software
Communications cable
WatchDog compatibility
USB
Supports detailed monitoring of UPS and site power conditions
Included
USB cable included
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time
Low voltage transfer to battery
power (setpoint)
High voltage transfer to battery
power (setpoint)
2-4 milliseconds
75
147
SPECIAL FEATURES
Cold Start (startup in battery mode
during a power failure)
High availability UPS features
Cold-start operation supported
Hot swappable batteries
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category A (EMI)
WARRANTY
Product Warranty Period (Worldwide)
Connected Equipment Insurance
(U.S., Canada & Puerto Rico)
2-year warranty, 3 year with registration. Note:
Registration is required
for 3-year warranty.
$250,000
Ultimate Lifetime Insurance
Related Items
Optional Products
4/5
Model Number
DCATV
DNET1
DTEL2
PDU1215
UPSWM
WEXT5-500-1500
Description
Network Surge Suppressor - Essential protection for TV/VCR coaxial lines
Network Surge Suppressor - Essential protection for data and communication lines
Network Surge Suppressor - Essential protection for data and communication lines
Basic PDU / Power Distribution Unit - Safe, reliable power distribution for critical networking
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
