MRS16, MRS25
www.vishay.com
Vishay BCcomponents
Professional Thin Film Leaded Resistors
FEATURES
• Technology: metal film
• Professional resistors in small outlines
• Low noise
• Material categorization: for definitions of
compliance
please
see
www.vishay.com/doc?99912
DESCRIPTION
A homogeneous film of metal alloy is deposited on a high
grade ceramic body. After a helical groove has been cut in
the resistive layer, tinned connecting wires of electrolytic
copper are welded to the end-caps. The resistors are coated
with lacquer which provides electrical, mechanical, and
climatic protection. Four or five color code rings designate
the resistance value and tolerance according to
IEC 60062.
Suitable replacements for MRS16 and MRS25 are
MBA/SMA 0204 and MBB/SMA 0207 professional.
APPLICATIONS
• All general purpose applications
TECHNICAL SPECIFICATIONS
DESCRIPTION
DIN size
CECC size
Resistance range
Resistance tolerance
Temperature coefficient
Rated dissipation,
P
70 (1)
Operating voltage,
U
max.
AC/DC
Operating temperature range
(1)
Peak permissible film temperature
(1)
Insulation voltage:
1 min;
U
ins
continuous
Note
(1)
Please refer to APPLICATION INFORMATION below.
300 V
75 V
500 V
75 V
0.4 W
200 V
-55 °C to 155 °C
155 °C
MRS16
0204
A
4.99
to
1 M
±1%
± 50 ppm/K
0.6 W
350 V
MRS25
0207
B
1
to
10 M
Revision: 07-Mar-16
Document Number: 28724
1
For technical questions, contact:
filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
MRS16, MRS25
www.vishay.com
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow
support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is
not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder
joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and
temperature limits in order to maintain a desired stability.
Vishay BCcomponents
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
Operation mode
Climatic category
Rated dissipation,
P
70
Applied maximum film temperature,
F max.
MRS16
Max. resistance change at rated
dissipation |R/R max.|, after:
1000 h
MRS25
1000 h
MRS16
MRS25
Power
-55 °C / +155 °C / 56 days
0.4 W
0.6 W
155 °C
4.99
to 1 M
± (0.5 %
R
+ 0.05
)
1to 10 M
± (0.5 %
R
+ 0.05
)
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: MRS16000C5119FCT00
M
TYPE
MRS1600
MRS2500
R
S
1
6
0
0
0
C
5
1
1
9
F
C
T
0
0
SPECIAL
Up to 2 digits
00
= standard
VARIANT
0
= neutral
TCR
C
= ± 50 ppm/K
RESISTANCE
3 digit value
1 digit multiplier
MULTIPLIER
7
= *10
-3
8
= *10
-2
9
= *10
-1
0
= *10
0
1
= *10
1
2
= *10
2
3
= *10
3
4
= *10
4
5
= *10
5
6
= *10
6
TOLERANCE
F
=±1%
PACKAGING
(1)
RP
CT
C1
PRODUCT DESCRIPTION: MRS16 50 1 % CT 51R1
MRS16
TYPE
MRS16
MRS25
50
TCR
± 50 ppm/K
1%
TOLERANCE
±1%
CT
PACKAGING
(1)
RP
CT
C1
51R1
RESISTANCE VALUE
51R1
= 51.1
1K
= 1 k
Notes
• The PART NUMBER is shown to facilitate the introduction of a unified part numbering system for ordering products
(1)
Please refer packaging table
PACKAGING
TYPE
CODE
C1
MRS16
MRS25
CT
RP
QUANTITY
1000
5000
5000
PACKAGING STYLE
Taped acc. to IEC 60286-1
fan-folded in a box
53 mm
Taped acc. to IEC 60286-1
on a reel
5 mm
WIDTH
PITCH
DIMENSIONS
184 mm x 75 mm x 42 mm
330 mm x 75 mm x 55 mm
242 mm x 76 mm x 86 mm
Revision: 07-Mar-16
Document Number: 28724
2
For technical questions, contact:
filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
MRS16, MRS25
www.vishay.com
DIMENSIONS
Vishay BCcomponents
D
d
L
I
M
DIMENSIONS
(Leaded Resistor Types, Mass and Relevant Physical Dimensions)
TYPE
MRS16
MRS25
D
max.
(mm)
1.6
2.5
L
max.
(mm)
3.6
6.5
d
nom.
(mm)
0.5
0.6
I
min.
(mm)
29.0
28.0
M
min.
(mm)
5.0
10.0
MASS
(mg)
125
220
12NC INFORMATION FOR HISTORICAL CODING REFERENCE
• The resistors have a 12 digit numeric code starting with
2322 15.
• The subsequent 2 digits indicate the resistor type and
packaging; see the 12NC Ordering Code table.
• The remaining 4 digits indicate the resistance value:
- The first 3 digits indicate the resistance value.
- The last digit indicates the resistance decade in
accordance with the 12NC Indicating Resistance
Decade table.
Last Digit of 12NC Indicating Resistance Decade
RESISTANCE DECADE
1
to 9.76
10
to 97.6
100
to 976
1 k to 9.76 k
10 k to 97.6 k
100 k to 976 k
1 M to 9.76 M
10 M
LAST DIGIT
8
9
1
2
3
4
5
6
12NC Example
The 12NC of a MRS16 resistor with value 750
,
supplied on
a bandolier of 1000 units in ammopack is: 2322 157 17501.
12NC
(Resistors Type and Packaging)
2322 15. .....
TYPE
BANDOLIER IN AMMOPACK
1000 UNITS
MRS16
MRS25
7 1....
6 1....
5000 UNITS
7 2....
6 2....
BANDOLIER ON REEL
5000 UNITS
7 3....
6 3....
Revision: 07-Mar-16
Document Number: 28724
3
For technical questions, contact:
filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000
消费电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
