All parts listed in this catalog are lead free and RoHS compliant.
NOTICE
Laird Technologies' products or subcomponents are not specifically designed or tested by Laird Technologies for use in any medical applications,
surgical applications, medical device manufacturing, or any similar procedure or process requiring approval, testing, or certification by the United States
food and drug administration or other similar Governmental entity. Applications with unusual environmental requirements such as military, medical,
life-support or Life-sustaining equipment are specifically not recommended without additional testing for such application.
3
SMD POWER INDUCTOR
FEATURES
AND APPLICATIONS
FEATURES
• Magnetic shielded structure
• Low DCR and high efficiency
• Low profile and small size
• High reliability
• AEC-Q200 qualified
APPLICATIONS
•
•
•
•
•
•
DC-DC converters and power suppliers
LCD TV’s, Blu-ray and gaming consoles
Tablets, notebooks, servers and printers
Smart phones, GPS, set top box and base stations
LED lighting
Automotive
Pb
PART NUMBER EXPLANATION
M G V
Product
series code
0
6
2
5
1
R
5
M
-
1
0
Part size code
Inductance value code Tolerance %
(i.e. 1R5: 1.5µH)
(i.e. M: ±20%)
PB free code
(i.e. 10: PB free)
ELECTRICAL SPECIFICATIONS
•
•
•
•
•
•
Tolerance: M: ±20%
Inductance tested at 100KHz, 0.25V
RMS Current is defined based on temperature rise approximate 40°C without core loss.(ambient temperature
25±5°C)
Saturation Current is the DC current at which the inductance drops off approximately 25% from its value without
current. (ambient temperature 25±5°C)
Operating temperature range:-40°C~+125°C (including self-heating temperature rise)
Storage temperature range (packaging conditions): 25±5°C and RH 70%(MAX.)
Note: RMS current is tested on a typical PCB and apply a constant current in still air. The temperature rise is
dependent on the application system condition including PCB PAD pattern, trace width and thickness and adjacent
components etc. It’s suggest to verify the temperature rise of the component under the real operation application
conditions.
This catalog only contains typical specifications. If you consider use or purchase the products. Please check the detail specifications in Laird Technologies
website or contact with Laird Technologies sales and technical support.
SynQor推出超小的病人全接触型400W医疗电源模块,该电源模块的封装为3×5×1.44,功率密度高达18.3W/立方英寸,转换效率达91%。 SynQor通过推出首款专门针对医疗应用而研制的AC/DC电源模块,使得公司的多元化战略持续成功地延伸至新的医疗领域。ACuQor模块系列实现了在3×5×1.44有限尺寸上提供400W的有用功率。SynQor可以提供48V,36V or 24V的...[详细]
便携式医疗设备的特殊性决定了它们应该是对用户友好的、必须工作在无菌环境下,并且空间占用小、耗能低。 同时,便携式医疗设备还需要足够的计算能力以便处理医疗数据,能够连接到无线或有线接口以便记录和发送数据。从设计人员的角度考虑,上述需求需要低功耗的单片机(MCU)和数字信号控制器(Digital Signal Controller,DSC)。 正是有了嵌入式处理器,设计人员才有可能设...[详细]