WiFi-PROTO
™
Manual
Additional Board
MikroElektronika
All Mikroelektronika’s development systems feature a large number of peripheral
modules expanding microcontroller’s range of application and making the
process of program testing easier. In addition to these modules, it is also
possible to use numerous additional modules linked to the development system
through the I/O port connectors. Some of these additional modules can operate
as stand-alone devices without being connected to the microcontroller.
WiFi-PROTO
WiFi-PROTO Additional Board
The
WiFi-PROTO
additional board is intended for wireless communication between a microcontroller and a remote device. Wireless
communication is enabled due to a WiFi module ZG2100M provided on the board. This module operates in compilance with the IEEE
802.11b/g/n standard, but it is also compliant with the IEEE 802.11G/N standards.
WiFi-PROTO
is connected to a microcontroller via
a proto board that is connected to a development system’s I/O port. The additional board communicates with the microcontroller via
the SPI interface. Modules JTAG and UART are provided on the board and are used for testing purposes.
ZG2100M WiFi module
Figure 1:
Front side of
WiFi-PROTO
Figure 2:
WiFi-PROTO
soldered on the PROTO board
1x9 male connector
Figure 3:
Back side of
WiFi-PROTO
Figure 4:
WiFi-PROTO
board’s dimensions
Figure 5:
Additional board
WiFi-PROTO
connection schematic
MikroElektronika