TMS320C5515 eZdsp Stick Quick Start Guide
C5515 eZdsp USB Stick
1.0 SYSTEM REQUIREMENTS
USB Cable
DVD
Quick Start Guide
To operate the Spectrum Digital XDS100 JTAG Emulator with your system it needs to meet
the following requirements:
• 2 GB of free hard disk space
• Microsoft Windows
TM
XP/Vista
• Min 1 GB ram, 2 GB recommended
• Min 1.5 GHz., dual core recommended
• Color Display
• Internet access
• USB port
• DVD reader
2.0 WHAT’S INCLUDED
The TMS320C5515 eZdsp USB Stick kit includes:
• TMS320C5515 eZdsp USB Stick
• USB extension cable
• TMS320C5515 eZdsp USB Stick DVD with Code Composer Studio (CCS)
• This Quick Start Guide
512846-0001 Rev A
3.0 C5515 eZdsp USB Stick Installation
Note:
Install
ALL
software prior to connecting the C5515 eZdsp USB Stick to the
computer !
Note:
The user
MUST
be logged onto windows with “Administrative Rights” and any
anti-virus software must be disabled during installations. Please contact your
system administrator if help is needed in this area.
1. Insert the Code Composer Studio (CCS) v4 DVD into the computer’s DVD drive and
wait for the auto-run application to start. The user prompts will step the user through
the rest of the CCS installation. The installation will place a CCS icon on your desktop.
2. At this time plug the C5515 eZdsp USB Stick into a USB port (directly or via the USB
extension cable) on your laptop or PC. Windows will recognize the new hardware
connection and complete the hardware installation automatically.
3. Launch CCS v4 from the shortcut icon on the desktop.
4. A prompt will appear asking for a workspace location. Each time CCS starts up the
main workspace is the main working folder for CCS. The default location will be
(on Windows XP) “C:\Documents and Settings\<user name>\My
Documents\workspace”. To have CCS automatically default to the specified
workspace location, select the “Use this as the default and do not ask again” option.
5. Create a user license. After launching CCS, the user may be prompted to create a
user license to activate the CCS software. Select the “Activate a License” option. Then
click “Use Free Limited License”. This will re-direct you to the Texas Instruments
website to complete the License creation process. Alternatively, the “Activate a
License” step may be bypassed temporarily and completed at a later date by clicking
“Evaluate Code Composer Studio for 30 days”.
512846-0001 Rev A
License Screen
4.0 CCS Configuration Instructions
1. Launch CCS v4 from the shortcut on the desktop. (This was created when CCS v4
was installed).
2. The CCS v4 window will appear. Click the “Target” menu, then select “New Target
Configuration File”.
3. The “New Target Configuration” window will appear. Enter a file name that describes
the emulator connection and/or Texas Instruments device being used and click
“Finish”. For example: “C5515_USBStick”.
4. The “Basic” configuration setup window will open in the CCS v4. Select “Texas
Instruments XDS100 USB Emulator” from the “Connection” menu. Type “5515” in the
“Device” field and select “USBSTK5515”, from the list.
512846-0001 Rev A
Configuration Screen
5. Click the “Save” button to save the configuration.
6. Click the “View” menu and select “Target Configurations” to expose the
configuration(s) that have been built or imported. A new tab labeled “Target
Configurations” will become available in the CCS window.
7. Expand the “User Defined” folder. Right-click on the new configuration that has been
created and click “Launch Selected Configuration”.
8. Click “View->Debug” then click “Target->Connect Target”. CCS will attempt to connect
to the C5515 eZdsp USB Stick and run the GEL file. Once the connection is
successful and the GEL file has finished, the console window will print a message
stating “Target Connection Complete”.
512846-0001 Rev A
5.0 Running the C5515 eZdsp USB Stick LED Blink Demonstration
1. The C5515 eZdsp USB Stick must be connected in CCS before proceeding. If the
board is not connected, please refer to section 4.0 of this guide.
2. Click “File->Import”.
3. When the new window appears, expand “CCS” and select “Existing CCS/CCE
Eclipse Project”. Click “Next”.
4. Select “Select Root Directory” and click the “Browse” button. Browse to directory path
“<Install_Dir>\ccsv4\emulation\boards\usbstk5515_v1\tests\led”.
The default <Install_Dir> is “C:\programfiles\Texas Instruments”
5. Highlight the “LED” folder and click “OK”. Then click “finish”
6. Click “View->C/C++Projects”. A new tab will appear in the CCS v4 window and there
should be a LED project visible.
7. Click “Project->Build Active Project”.
8. When the build is complete, a message will print in the Console Window.
9. Look in the “C\C++Projects” tab again and expand the “binaries” folder. There now
should be a “led.out” file listed.
10. Right click on “led.out” and click “Load Program”.
11. Click “Target->Run”. The C5515 eZdsp USB Stick “XF” LED should now blink.
6.0 SUPPORT RESOURCES
1. For additional information regarding the TMS320C5515 family of DSPs please refer
to the following page on the TI web site:
http://tiexpressdsp.com/index.php/C5000
2. If you have problems or need additional information regarding the embedded
emulation please refer to the XDS100 USB wiki on the TI web site. The URL for this
site is:
http://tiexpressdsp.com/index.php?title=XDS100
3. Code Composer Studio support is available via a forum at:
http://community.ti.com/forums/138.aspx
4. More information about other Spectrum Digital emulators can be found at:
www.spectrumdigital.com
5. Additional development support is available via the online community:
www.ti.com/ezdsp5000
512846-0001 Rev A
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
