Philips Semiconductors
Product specification
Vertical deflection and guard circuit
(90˚)
GENERAL DESCRIPTION
TDA3653B
TDA3653C
The TDA3653B/C is a vertical deflection output circuit for drive of various deflection systems with currents up to
1.5 A peak-to-peak.
Features
•
Driver
•
Output stage
•
Thermal protection and output stage protection
•
Flyback generator
•
Voltage stabilizer
•
Guard circuit
QUICK REFERENCE DATA
PARAMETER
Supply
(note 1)
Supply voltage range
pin 9
pin 6
Output
(pin 5)
Peak output voltage during flyback
Output current
Operating junction temperature range
Thermal resistance junction to mounting base
(SOT110B)
(SOT131)
Note to the quick reference data
1. The maximum supply voltage should be chosen such that during flyback the voltage at pin 5 does not exceed 60 V.
PACKAGE OUTLINES
TDA3653B: 9-lead SIL; plastic (SOT110B); SOT110-1; 1996 November 25.
TDA3653C: 9-lead SIL; plastic power (SOT131); SOT131-2 November 25.
R
th j-mb
R
th j-mb
−
−
10
3.5
−
−
K/W
K/W
V
5-4M
I
5(p-p)
T
j
−
−
−25
−
1.2
−
60
1.5
+150
V
A
°C
V
P
= V
9-4
V
6-4
10
−
−
−
40
60
V
V
SYMBOL
MIN.
TYP.
MAX.
UNIT
March 1991
2
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90˚)
FUNCTIONAL DESCRIPTION
Output stage and protection circuit
TDA3653B
TDA3653C
Pin 5 is the output pin. The supply for the output stage is fed to pin 6 and the output stage ground is connected to pin 4.
The output transistors of the class-B output stage can each deliver 0.75 A maximum.
The maximum voltage for pin 5 and 6 is 60 V.
The output power transistors are protected such that their operation remains within the SOAR area. This is achieved by
the co-operation of the thermal protection circuit, the current-voltage detector, the short-circuit protection and the special
measures in the internal circuit layout.
Driver and switching circuit
Pin 1 is the input for the driver of the output stage. The signal at pin 1 is also applied via external resistors to pin 3 which
is the input of a switching circuit. When the flyback starts, this switching circuit rapidly turns off the lower output stage
and so limits the turn-off dissipation. It also allows a quick start of the flyback generator.
External connection of pin 1 to pin 3 allows for applications in which the pins are driven separately.
Flyback generator
During scan the capacitor connected between pins 6 and 8 is charged to a level which is dependent on the value of the
resistor at pin 8 (see Fig.1).
When the flyback starts and the voltage at the output pin (pin 5) exceeds the supply voltage, the flyback generator is
activated.
The supply voltage is then connected in series, via pin 8, with the voltage across the capacitor during the flyback period.
This implies that during scan the supply voltage can be reduced to the required scan voltage plus saturation voltage of
the output transistors.
The amplitude of the flyback voltage can be chosen by changing the value of the external resistor at pin 8.
It should be noted that the application is chosen such that the lowest voltage at pin 8 is > 2.5 V, during normal operation.
Guard circuit
When there is no deflection current and the flyback generator is not activated, the voltage at pin 8 reduces to less than
1.8 V. The guard circuit will then produce a DC voltage at pin 7, which can be used to blank the picture tube and thus
prevent screen damage.
Voltage stabilizer
The internal voltage stabilizer provides a stabilized supply of 6 V to drive the output stage, which prevents the drive
current of the output stage being affected by supply voltage variations.
March 1991
4
Philips Semiconductors
Product specification
Vertical deflection and guard circuit (90˚)
RATINGS
Limiting values in accordance with the Absolute Maximum System (IEC 134);
pins 4 and 2 externally connected to ground.
PARAMETER
Supply voltage (pin 9)
Supply voltage output stage (pin 6)
Output voltage (pin 5)
Input voltage (pins 1 and 3)
External voltage at pin 7
Peak output current (pin 5)
repetitive
non-repetitive
Peak output current (pin 8)
repetitive
non-repetitive
Total power dissipation
Storage temperature range
Operating ambient temperature range
Operating junction temperature range
Note
1.
Non-repetitive duty factor maximum 3.3%.
I
8RM
±
I
8SM
P
tot
T
stg
T
amb
T
j
−25
−55
0.85
−
0.75
1.5
see Fig.2
+150
see Fig.2
+150
±
I
5RM
±
I
5SM
−
−
0.75
1.5
SYMBOL
V
P
= V
9-4
V
6-4
V
5-4
V
1; 3-2
V
7-2
−
−
−
−
−
MIN.
40
60
60
V
P
5.8
MAX.
TDA3653B
TDA3653C
UNIT
V
V
V
V
V
A
A
(1)
A
A
(1)
°C
°C
Fig.2 Power derating curves (for SOT110B).
Fig.3 Quiescent current I
4
as a function of supply
voltage V
P.
March 1991
5
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
