V/VX/D3V
Ordering Information
Common Accessories
■
Actuators
(Sold Separately)
Actuators are supplementary components used when operating pin plunger switches using cams or dogs or when transmitting mechanical
movements that are not in alignment with the switch plunger. Three series of actuators are optionally available: VAL, VAM and VAV series.
1.
The VAL series are designated for operation by rotary cam or sliding devices.
2.
The VAM series actuators designed are operate in reverse movement and are highly resistive to vibration and shock. The large OT of these
models make them ideal for machine tools and automatic doors where the switches are subject to heavy vibration or shock.
3.
The VAV series actuators are highly sensitive to force. Therefore, they should be used in applications where the operating force to be applied
to the switch is very low.
Common to Miniature Basic Models (V, VX and D3V)
Actuator
Series
Common to Miniature, V-Size models
VAL
VAL
VAL12
VAL2, VAL02
VAM
VAM21
VAM
VAM-1
VAM22
VAM2
VAV
VAV
VAV-5
VAV2
Leaf Spring
Simulated Roller
Leaf Spring
Roller
Leaf Spring
Reverse Long
Hinge
Reverse Hinge
Reverse Roller
Modified
Reverse Hinge
Roller
Reverse Long
Hinge Roller
Long Hinge
Hinge Wire
Hinge Roller
Note: 1.
These actuators do not include switches
2.
Pin plunger versions of Omron’s miniature basic snap-action switches, with the mounting hole locations shown below, can be used with
the actuators (except for special models).
10.3
±0.5
22.2
±0.15
V/VX/D3V Common Accessories
173
Dimensions
Note: 1.
Unless otherwise specified, all units are in millimeters and a tolerance of
±0.4
mm applies to all dimensions
2.
The operating characteristics below apply when the actuator is attached to V-15-1A5-K basic switch. (Except the VAV-5, which applies when
VX-5-1A2 is attached.) Consult Omron for operating characteristics of models not listed in the following tables.
3.
Model numbers are for the actuator only. These actuators do not include the switch.
4.
The operating characteristics are for operation in the A direction (
).
➡
■
VAL Series
Leaf Spring
VAL (Designed for models of OF 200
gf
and
greater)
t=0.3,
width:
4.7
(Stainless-steel
spring lever)
Characteristics when used with
V-15-1A5
OF max.
RF min.
OT min.
MD max.
FP max.
OP
230 gf
50 gf
0.8 mm
0.4 mm
17 mm
14.9
±
0.5 mm
Two, M3
2.8
22.2
±
0.15
27.8
16
Simulated Roller Leaf Spring
VAL12 (Designed for models of OF 200
gf
and
greater)
t=0.3, (Stainless-steel spring lever)
2.4R
Characteristics when used with
V-15-1A5
OF max.
RF min.
OT min.
MD max.
FP max.
Two, M3
16
230 gf
50 gf
0.8 mm
0.4 mm
22.9 mm
20.5
±
0.8 mm
OP
Roller Leaf Spring
VAL2, VAL02 (Designed for models of OF 200
gf
max.)
4.8 dia.
4.8 (see note)
Characteristics when used with
V-15-1A5
OF max.
RF min.
OT min.
MD max.
FP max.
Two, M3
16
230 gf
50 gf
0.8 mm
0.4 mm
22.6 mm
20.5
±
0.5 mm
OP
Note:
VAL2:
Unlubricated polyacetal resin roller
VAL02:
Stainless-steel roller
■
VAM Series
Reverse Long Hinge Lever
VAM
62R
t=1
(stainless-steel
lever)
Characteristics when used with
V-15-1A5
OF max.
RF min.
OT min.
MD max.
FP max.
OP
200 gf
30 gf
7 mm (reference value)
5 mm
45 mm
20
±
9 mm
Two, M3
20
174
V/VX/D3V Common Accessories
Note: 1.
Unless otherwise specified, all units are in millimeters and a tolerance of
±0.4
mm applies to all dimensions
2.
The operating characteristics below apply when the actuator is attached to V-15-1A5-K basic switch. (Except the VAV-5, which applies when
VX-5-1A2 is attached.) Consult Omron for operating characteristics of models not listed in the following tables.
3.
Model numbers are for the actuator only. These actuators do not include the switch.
4.
The operating characteristics are for operation in the A direction (
).
➡
Reverse Hinge Lever
VAM21
26R
t=1
(stainless-
steel lever)
Characteristics when used with
V-15-1A5
OF max.
RF min.
OT min.
MD max.
Two, M3
20
360 gf
70 gf
5 mm (reference value)
4 mm
30 mm
20
±
4 mm
FP max.
OP
Reverse Roller Modified Lever
VAM-1
t=1
7R (stainless-
steel lever)
46.5R
Characteristics when used with
V-15-1A5
OF max.
RF min.
OT min.
MD max.
FP max.
OP
300 gf
40 gf
5 mm (reference value)
6 mm
47 mm
30
±
5 mm
Two, M3
20
Reverse Hinge Roller Lever
VAM22
9.5 dia. 4.8.
(Stainless-
steel roller)
Characteristics when used with
V-15-1A5
OF max.
360 gf
70 gf
3 mm (reference value)
4 mm
38 mm
31.3
±
3 mm
RF min.
OT min.
MD max.
FP max.
25R
Two, M3
20
OP
Reverse Long Hinge Roller Lever
VAM2
9.5 dia.
51R
4.8 (Stainless-steel roller)
Characteristics when used with
V-15-1A5
OF max.
RF min.
OT min.
MD max.
FP max.
OP
250 gf
40 gf
7 mm (reference value)
6 mm
48 mm
31
±
6 mm
Two, M3
20
V/VX/D3V Common Accessories
175
Note: 1.
Unless otherwise specified, all units are in millimeters and a tolerance of
±0.4
mm applies to all dimensions
2.
The operating characteristics below apply when the actuator is attached to V-15-1A5-K basic switch. (Except the VAV-5, which applies when
VX-5-1A2 is attached.) Consult Omron for operating characteristics of models not listed in the following tables.
3.
Model numbers are for the actuator only. These actuators do not include the switch.
4.
The operating characteristics are for operation in the A direction (
).
➡
■
VAV Series
Long Hinge Lever
VAV
44.4R
t=1,
width:
4.9 (stainless-steel lever)
Characteristics when used with
V-15-1A5
OF max.
RF min.
OT min.
Two, M3 16
35 gf
4 gf
7.6 mm
3.6 mm
4.7 mm
Approx 10.6 mm
MD max.
FP max.
OP
Hinge Wire Lever
VAV-5 (Designed for models of OF 25
gf
max.)
0.8 dia.
(stainless-steel lever)
50R
Characteristics when used with
VX-5-1A2
OF max.
RF min.
OT min.
MD max.
Two, M3
16
2.8 gf
0.2 gf
16 mm
2 mm
5 mm
Approx 16.7 mm
FP max.
OP
Hinge Roller Lever
VAV2
4.8 dia.
4.8 (Unlubricated polyacetal resin roller)
Characteristics when used with
V-15-1A5
OF max.
RF min.
OT min.
MD max.
Two, M3
16
19R
75 gf
9 gf
4.8 mm
1.5 mm
1.2 mm
18.6
±
1.6 mm
FP max.
OP
176
V/VX/D3V Common Accessories
MEMO
V/VX/D3V Common Accessories
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
